1. Product Overview
The JBL Onbeat Xtreme is a high-performance audio system designed to enhance your listening experience. It offers seamless integration with various Apple iOS devices and provides versatile connectivity options for a wide range of audio sources.
Figure 1.1: Front view of the JBL Onbeat Xtreme with an iPad docked, showcasing its design and device compatibility.
Video 1.1: An overview of the JBL Onbeat Xtreme Speaker, highlighting its key features and design.
2. Key Features
- Superior Audio Quality: Features JBL Ridge tweeters and JBL Atlas woofers with computer-optimized DSP equalization and user-selectable EQ settings for stunning sound.
- High-Quality Bluetooth Streaming: Supports advanced A2DP and AVRCP Bluetooth profiles for interference-free operation and uses the AAC codec for optimal audio streaming.
- Hands-Free Calling: Full speakerphone functionality with Bluetooth phones, enabled by a built-in microphone and DSP with echo cancellation.
- Versatile Docking: Rotating dock connector for iPad, iPod, and iPhone devices allows positioning in portrait or landscape orientation, with an extendable docking arm for optimal placement.
- Distinctive Design: Exclusive JBL weave design offers an elegant and dynamic, one-of-a-kind look.
3. Setup Guide
3.1 Unpacking and Placement
- Carefully remove the JBL Onbeat Xtreme from its packaging.
- Place the unit on a stable, flat surface away from direct sunlight, heat sources, or excessive moisture.
- Ensure adequate ventilation around the unit.
3.2 Power Connection
- Connect the supplied AC power adapter to the 'AC IN' port on the rear of the JBL Onbeat Xtreme.
- Plug the other end of the power adapter into a functional wall outlet.
- The unit will power on automatically or can be turned on using the power button.
Figure 3.1: Rear view of the speaker dock, indicating power and auxiliary input connections.
4. Operating Instructions
4.1 Docking an iOS Device
- Gently extend the docking arm if necessary.
- Align your iPad, iPod, or iPhone with the 30-pin connector on the dock.
- Carefully push the device down onto the connector until it is securely seated.
- Rotate your device to portrait or landscape orientation as desired for viewing.
Figure 4.1: Top view demonstrating an iPhone securely docked in the unit.
4.2 Bluetooth Pairing and Streaming
- Press the Bluetooth button on the speaker or remote control to enter pairing mode. The Bluetooth indicator light will flash.
- On your Bluetooth-enabled device (smartphone, tablet, computer), go to Bluetooth settings and search for available devices.
- Select "JBL Onbeat Xtreme" from the list. If prompted for a passcode, enter "0000".
- Once paired, the Bluetooth indicator light will turn solid. You can now stream audio wirelessly.
4.3 Using the Remote Control
The included RF remote control provides full system function control and music navigation from a distance. Point the remote towards the speaker and use the buttons for power, volume, track control, and source selection.
Figure 4.2: Side view highlighting the integrated control buttons on the speaker unit.
4.4 Speakerphone Functionality
- When a call comes in while your phone is connected via Bluetooth, the music will pause.
- Press the phone button on the speaker or remote to answer the call.
- Use the built-in microphone for hands-free conversation.
- Press the phone button again to end the call.
5. Maintenance
5.1 Cleaning
- Before cleaning, disconnect the power adapter from the wall outlet.
- Use a soft, dry cloth to wipe the exterior surfaces of the speaker.
- Do not use abrasive cleaners, waxes, or solvents as they may damage the finish.
5.2 Storage
- If storing the unit for an extended period, disconnect it from power.
- Store in a cool, dry place, preferably in its original packaging to protect it from dust and damage.
6. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| No power | Power adapter not connected or outlet not working. | Ensure power adapter is securely connected to the unit and a live wall outlet. Try a different outlet. |
| No sound from docked device | Device not properly docked; volume too low; incorrect source selected. | Re-seat the device on the dock. Increase volume on both the speaker and the device. Ensure the correct input source is selected. |
| Bluetooth pairing issues | Device too far; speaker not in pairing mode; interference. | Move device closer to the speaker. Ensure speaker is in Bluetooth pairing mode (flashing light). Turn off other Bluetooth devices nearby. |
| Remote control not working | Batteries dead; obstruction; out of range. | Replace remote batteries. Ensure no obstructions between remote and speaker. Move closer to the speaker. |
7. Specifications
| Feature | Detail |
|---|---|
| Brand | JBL |
| Model | On Beat Xtreme |
| Product Dimensions (LxWxH) | 24.38 x 44.45 x 22.86 cm |
| Item Weight | 4.04 kg |
| Hardware Interface | Bluetooth |
| Compatible Devices | iPod Nano, iPad (and other 30-pin iPod/iPhone models) |
| Special Features | Built-in microphone, Rotating dock connector |
| Speaker Connectivity | Wireless (Bluetooth) |
| Wattage | 3.00 Watts |
| Power Source | AC Powered |
| Includes Remote | No (Note: Product description states it includes a remote, but specifications say 'No'. Please refer to product packaging for definitive information.) |
| Color | Black |
| UPC | 050036313063 |
8. Warranty and Support
8.1 Manufacturer's Warranty
This product is covered by a 1-Year Manufacturer Warranty from the date of purchase. Please retain your proof of purchase for warranty claims.
8.2 Customer Support
For technical assistance, troubleshooting, or warranty inquiries, please contact JBL customer support through their official website or the contact information provided with your product packaging.