1. Product Overview
The Intertape PM2 Medium-Grade Flatback Packaging Tape is a pressure-sensitive tape designed for efficient and secure packaging. It features a flatback kraft paper carrier and a natural rubber resin adhesive, providing a strong, attractive seal that complements most corrugated cardboard surfaces.
This tape offers excellent adhesion across a wide range of temperatures and humidity conditions, making it suitable for various applications, including low-temperature splicing. It meets USPS requirements and is designed for use on all types of cartons.
2. Setup
Proper preparation ensures optimal performance of the packaging tape.
- Surface Preparation: Ensure the surface to which the tape will be applied is clean, dry, and free from dust, grease, or any other contaminants. A clean surface is crucial for maximum adhesion.
- Unrolling: Carefully unroll the tape from its core. Ensure the adhesive side is facing the surface to be taped.
Figure 2.1: A single roll of Intertape PM2 Medium-Grade Flatback Packaging Tape.
3. Operating Instructions
Follow these steps for effective tape application:
- Application: Apply the tape firmly to the desired surface. Use even, consistent pressure along the entire length of the tape to ensure proper adhesion and activate the natural rubber resin adhesive. For best results, apply a single, continuous strip.
- Cutting: Use a suitable tape dispenser or a sharp cutting tool to cleanly cut the tape. Avoid tearing the tape by hand, as this can lead to uneven edges and reduced performance.
- Temperature Range: The tape is designed to perform effectively within a service/operating temperature range of 40°F to 225°F (approximately 4°C to 107°C).
- Humidity Conditions: This tape maintains its performance across a wide range of humidity conditions.
Figure 3.1: Multiple rolls of Intertape PM2 Medium-Grade Flatback Packaging Tape.
4. Maintenance
Proper storage and handling will extend the life and effectiveness of the tape.
- Storage: Store tape rolls in a cool, dry environment. Avoid direct sunlight, high humidity, and extreme temperatures, as these conditions can degrade the adhesive quality over time.
- Cleanliness: Keep tape rolls free from dust, dirt, and other contaminants when not in use. Store in original packaging or a clean container if possible.
5. Troubleshooting
If you encounter issues with the tape, consider the following solutions:
- Issue: Tape not adhering properly.
Solution: Ensure the application surface is clean, dry, and free of oils or dust. Apply firm, even pressure during application. Verify the tape has been stored correctly in a cool, dry place. - Issue: Tape tearing or splitting during use.
Solution: Check for any nicks or damage on the tape edge. Ensure the cutting tool or dispenser blade is sharp and clean. Apply tape smoothly without excessive tension.
6. Specifications
| Attribute | Detail |
|---|---|
| Brand | Intertape |
| Model Number | PM2/82 |
| Size | 3 in. x 60 yds. (72mm x 55m) |
| Color | Tan |
| Material | Kraft, flatback paper |
| Adhesive | Natural rubber resin |
| Thickness | 6 mils (carrier, adhesive) |
| Adhesion | 57 ounces per inch (to stainless steel test panel) |
| Tensile Strength | 36 pounds per inch (longitudinal) |
| Elongation | 3% |
| Service/Operating Temperature | 40°F to 225°F (4°C to 107°C) |
| Standards Met | ASTM D6123, Type II; PPP-T-42C, Type II; C.I.D. A-A-883B Type II; Boeing BAC 5317 |
| Core Diameter | 3 inches |
| Item Weight | 1.14 pounds |
| Product Dimensions | 5.13 x 5.13 x 2.83 inches |
| UPC | 401000085866 |
| Country of Origin | United States |
7. Warranty Information
No specific warranty information is provided for this product within the available data. For details regarding product quality or defects, please contact Intertape customer support directly.
8. Support
For further assistance, product inquiries, or to explore other Intertape products, please visit the official Intertape Store on Amazon:
