ArtToFrames 12x36 Inch Satin White Picture Frame Instruction Manual

1. Product Overview

The ArtToFrames 12x36 inch Satin White Picture Frame is designed to display your cherished photos, art, diplomas, or posters. Crafted from engineered wood (MDF) with a smooth satin white finish, this frame offers a contemporary and modern aesthetic. It is lightweight and features a slim profile, allowing your artwork to be the focal point.

This frame is suitable for prints measuring 12x36 inches or 36x12 inches, providing versatility for both vertical and horizontal display. The actual finished frame size is 14x38 inches, with a width of 1.25 inches and a depth of 0.75 inches. It includes a .375 inch deep rabbet to securely hold your artwork.

Figure 1: ArtToFrames 12x36 inch Satin White Picture Frame with artwork.

2. Package Contents

Your ArtToFrames picture frame package includes the following items:

• One (1) 12x36 inch Satin White Picture Frame
• One (1) Plexi Glass panel
• One (1) Corrugated backing board
• One (1) Wire hanging set (including wire, D-rings, screws, and a nail/hook)

Figure 2: Included hanging hardware and frame backing.

3. Setup and Installation

3.1 Inserting Your Artwork

1. Carefully lay the frame face down on a clean, soft surface to prevent scratches.
2. Locate the metal tabs on the back of the frame. Gently bend or rotate these tabs to release the backing board.
3. Remove the backing board and the Plexi Glass panel. Note that the Plexi Glass may have protective films on both sides; peel these off before use for optimal clarity.
4. Place your 12x36 inch artwork into the frame, ensuring it is centered and aligned as desired.
5. Carefully place the Plexi Glass panel over your artwork.
6. Reinsert the backing board and secure it by bending or rotating the metal tabs back into place.

3.2 Wall Mounting with Wire Hanging Set

The included wire hanging set allows for secure wall mounting. Follow these steps:

1. On the back of the frame, measure approximately one-third of the way down from the top edge on both vertical sides. Mark these points with a pencil.
2. Position the D-rings (triangle hooks) at these marked points and secure them with the provided screws using a screwdriver. Ensure they are firmly attached.
3. Thread the hanging wire through the openings of the D-rings. Twist the wire around itself several times to create a secure loop, ensuring the wire is taut but allows for slight slack when hanging.
4. To hang the frame on the wall, measure the desired height for the top of your frame. Mark the center point at the top of the frame on the wall.
5. From this mark, measure down approximately 3 inches (or the distance from the top of your frame to the taut hanging wire when held up). This is where your wall hook will be placed.
6. Gently hammer the provided nail/hook into the wall at this lower mark.
7. Hang the wire of your frame onto the installed wall hook. Adjust as needed to ensure the frame is level.

4. Usage and Display

The ArtToFrames 12x36 inch frame is designed for both wall mounting and tabletop display (if an easel back is purchased separately or if propped). Its versatile dimensions allow for both vertical and horizontal orientation, accommodating various types of artwork and room layouts.

• Wall Display: Use the included wire hanging set for secure wall mounting. Ensure the wall anchors are appropriate for your wall type.
• Tabletop Display: While primarily designed for wall hanging, the frame can be propped against a surface or used with a compatible easel back (not included) for tabletop display.

Figure 3: Frame displayed vertically on a wall.

5. Maintenance

To maintain the appearance and longevity of your ArtToFrames picture frame, follow these simple maintenance guidelines:

• Cleaning the Frame: Wipe the frame's satin white finish with a soft, dry, lint-free cloth. Avoid abrasive cleaners or harsh chemicals that could damage the finish.
• Cleaning the Plexi Glass: For the Plexi Glass, use a soft, damp cloth with a mild, non-abrasive cleaner specifically designed for acrylic or plastic. Avoid using paper towels, as they can scratch the surface. A microfiber cloth or a soft duster is recommended.
• Handling: Always handle the frame by its edges to avoid touching the Plexi Glass or artwork directly.
• Placement: Avoid placing the frame in direct sunlight or in areas with extreme temperature fluctuations or high humidity, as this can affect the frame material and artwork.

6. Troubleshooting

• Artwork does not fit: Ensure your artwork measures exactly 12x36 inches. If it is slightly larger, minor trimming may be required. If it is smaller, consider using a mat (not included) to fill the space and enhance the presentation.
• Frame appears scratched or cloudy: The Plexi Glass comes with protective films on both sides. Ensure these films have been completely removed before inserting your artwork. If scratches occur after removal, refer to the cleaning instructions in Section 5.
• Difficulty with hanging: Ensure the D-rings are securely screwed into the frame and the wire is tightly twisted. For wall installation, verify that the wall hook is firmly embedded and can support the weight of the frame and artwork. If the frame feels unstable, consider using two wall hooks spaced appropriately for better balance.
• No built-in hanger: This frame is designed for use with the included wire hanging set, which provides a flexible and secure hanging solution. It does not feature a built-in hanger directly on the frame itself.

7. Specifications

8. Warranty and Support

ArtToFrames offers a 30-day money-back guarantee. For damages incurred during shipping, all original packaging must be saved to facilitate claims. Please retain your proof of purchase.

For further assistance or inquiries, please visit the official ArtToFrames website or contact customer support through your purchase platform.