ArtToFrames 19x20 inch Satin Black Picture Frame Instruction Manual

Introduction

This manual provides detailed instructions for the proper setup, operation, and maintenance of your ArtToFrames 19x20 inch Satin Black Picture Frame. Please read these instructions carefully before use to ensure optimal performance and longevity of your product.

Product Features

• Includes Plexi Glass and a wire hanging set for wall mounting.
• Constructed from MDF (Medium Density Fiberboard) for durability.
• Designed to fit 19x20 inch photos, prints, diplomas, or artwork.
• Actual frame size (finished size) is 21x22 inches, with a frame width of 1.25 inches.
• Satin black finish provides a versatile and sophisticated aesthetic.

Setup and Installation

Before installing your frame, ensure you have a screwdriver, pencil, measuring tape, and hammer available. The frame comes with all necessary hanging hardware.

1. Prepare the Frame

Carefully remove the protective film from both sides of the Plexi Glass. This film prevents scratches during shipping and should be peeled off before inserting your artwork.

Image: The ArtToFrames 19x20 inch Satin Black Picture Frame.

2. Attach Hanging Hardware

The frame includes D-ring hangers and hanging wire for secure wall mounting. Follow these steps to attach them:

1. Measure approximately one-third of the way down from the top of the frame on both vertical sides. Mark these points with a pencil.
2. Position the D-ring hangers at these marks and secure them with the provided screws using a screwdriver.
3. Thread the hanging wire through the openings of both D-ring hangers.
4. Twist the wire around itself several times at each D-ring to create a secure loop, ensuring the wire is taut but allows for slight slack when hanging.

Image: Back of the frame with hanging hardware.

3. Hanging the Frame on the Wall

Once the wire is securely attached, you can hang your frame:

1. Hold the frame against the wall in the desired position. Use a level to ensure it is straight.
2. Mark the center point at the top of the frame on the wall with a pencil.
3. Measure 3 inches below this mark. This is where your picture frame hanger (nail/hook) will be placed.
4. Gently hammer the picture frame hanger into the wall at the marked point.
5. Carefully hang the frame by placing the wire onto the installed hanger. Adjust as needed to ensure it is level and secure.

Operating Instructions (Inserting Artwork)

To insert your artwork into the frame:

1. Lay the frame face down on a clean, soft surface to prevent scratching the Plexi Glass or frame finish.
2. Carefully bend back the metal tabs holding the backing in place.
3. Remove the backing and the Plexi Glass.
4. Place your 19x20 inch artwork or photo into the frame opening.
5. Reinsert the Plexi Glass, ensuring it is clean and free of dust.
6. Place the backing board back into the frame.
7. Bend the metal tabs back down to secure the contents firmly.

Maintenance

To keep your ArtToFrames picture frame in excellent condition:

• Cleaning the Frame: Wipe the frame with a soft, dry cloth. Avoid abrasive cleaners or harsh chemicals that could damage the finish.
• Cleaning the Plexi Glass: Use a soft, lint-free cloth and a mild, non-abrasive cleaner specifically designed for acrylic or plastic. Do not use paper towels, as they can scratch the surface. A Swiffer duster can also be effective for light dusting.
• Handling: Always handle the frame by its sides to avoid touching the Plexi Glass or damaging the finish.

Troubleshooting

Issue: Frame does not have a built-in hanger.

Solution: The ArtToFrames 19x20 inch Satin Black Picture Frame is designed for wire hanging and includes a complete wire hanging set. This set consists of D-ring hangers and hanging wire, which you attach to the back of the frame as described in the "Setup and Installation" section. This method provides a secure and adjustable way to hang your frame.

Specifications

Warranty Information

ArtToFrames offers a 30-day money-back guarantee. For damages incurred during shipping, all original packaging must be saved to facilitate claims processing.

Customer Support

For further assistance or inquiries regarding your ArtToFrames product, please contact ArtToFrames customer service.