Product Overview
The Feit Electric PL13/41 is a 13-watt compact fluorescent (CFL) PL lamp designed for various indoor lighting applications. This energy-efficient bulb provides cool white light, making it suitable for a range of fixtures.
Image: A single Feit Electric PL13/41 13-Watt Fluorescent PL Bulb, featuring a compact U-shaped fluorescent tube with a 2-pin base.
Key features include:
- Energy efficient design.
- Compact PL shape for specific fixtures.
- Cool White light (4100 Kelvin).
- 800 lumens brightness.
- Designed for 120 Volts AC power.
Setup and Installation
This section provides instructions for safely installing your Feit Electric PL13/41 bulb. Always ensure power is off before handling electrical components.
- Safety First: Before attempting installation, ensure the power supply to the fixture is turned OFF at the circuit breaker or wall switch.
- Identify Fixture Type: Confirm your fixture is designed for a PL-type compact fluorescent bulb with a 2-pin base.
- Remove Old Bulb (if applicable): If replacing an existing bulb, gently twist and pull the old bulb straight out from its socket. Allow it to cool if it was recently in use.
- Insert New Bulb: Align the two pins on the base of the Feit Electric PL13/41 bulb with the corresponding slots in the fixture's socket. Gently push the bulb straight into the socket until it is firmly seated. Do not force the bulb.
- Restore Power: Once the bulb is securely installed, restore power to the fixture from the circuit breaker or wall switch.
- Test: Turn on the light switch to confirm the bulb is functioning correctly.
Important Safety Notes:
- Do not install this bulb in dimmable fixtures unless explicitly stated on the product packaging or fixture.
- Avoid touching the glass portion of the bulb with bare hands during installation, as oils can reduce bulb life. Use a clean cloth or gloves.
- Dispose of old fluorescent bulbs according to local regulations, as they contain small amounts of mercury.
Operating Instructions
The Feit Electric PL13/41 bulb operates simply once installed. It is designed for standard on/off functionality.
- Turning On/Off: Use the wall switch or fixture control to turn the light on or off.
- Warm-up Time: Like most fluorescent bulbs, this bulb may require a brief warm-up period (a few seconds) to reach full brightness, especially in colder environments.
Maintenance
Minimal maintenance is required for the Feit Electric PL13/41 bulb to ensure optimal performance and longevity.
- Cleaning: Ensure the power is off and the bulb is cool before cleaning. Gently wipe the bulb with a soft, dry, lint-free cloth to remove dust. Do not use liquid cleaners.
- Replacement: Replace the bulb when it reaches the end of its lifespan (indicated by flickering, dimming, or failure to light). Follow the installation steps for replacement.
- Disposal: Fluorescent bulbs contain small amounts of mercury and should be recycled or disposed of according to local hazardous waste guidelines. Do not dispose of in regular household trash.
Troubleshooting
If your Feit Electric PL13/41 bulb is not functioning as expected, refer to the following common issues and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Bulb does not light up. | No power to the fixture, bulb not seated correctly, bulb has reached end of life, faulty fixture. | Check power switch/breaker. Ensure bulb is fully inserted. Replace bulb. Inspect fixture wiring (consult electrician if unsure). |
| Bulb flickers. | Loose connection, incompatible dimmer, bulb nearing end of life, cold environment. | Ensure bulb is secure. Do not use with incompatible dimmers. Replace bulb. Allow bulb to warm up in cold conditions. |
| Light is dim. | Bulb nearing end of life, dust accumulation, incorrect bulb type for fixture. | Replace bulb. Clean bulb and fixture. Ensure correct wattage and lumen output for your needs. |
If troubleshooting steps do not resolve the issue, contact Feit Electric customer support or a qualified electrician.
Specifications
Detailed technical specifications for the Feit Electric PL13/41 13-Watt Fluorescent PL Bulb:
| Attribute | Value |
|---|---|
| Brand | Feit Electric |
| Model Number | PL13/41 |
| Light Type | CFL (Compact Fluorescent Light) |
| Wattage | 13 watts |
| Incandescent Equivalent Wattage | 13 Watts |
| Brightness | 800 Lumen |
| Color Temperature | 4100 Kelvin (Cool White) |
| Voltage | 120 Volts |
| Bulb Shape Size | T (PL Shape) |
| Average Life | 10000 Hours |
| Material | Copper (base components) |
| Indoor/Outdoor Usage | Indoor use only |
| Item Weight | 0.01 ounces |
| Product Dimensions | 1.3"W x 0.7"H (approximate) |
| Country of Origin | China |
| UPC | 017801014310 |
Warranty and Support
Warranty information for the Feit Electric PL13/41 bulb is not explicitly provided within this manual. Please refer to the product packaging or the official Feit Electric website for the most current warranty details.
For technical support or further inquiries, please visit the official Feit Electric website or contact their customer service department. Contact information can typically be found on the product packaging or their website.
You can visit the Feit Electric Store on Amazon for more information: Feit Electric Store
