Introduction
The HORIPAD3 PRO. is a high-performance wired controller designed for the PlayStation 3, offering advanced customization and enhanced control for an optimized gaming experience. This manual provides detailed instructions on setup, operation, and maintenance to help you get the most out of your controller.
Figure 1: Overview of the HORIPAD3 PRO. Controller. This image displays the front view of the controller, highlighting its ergonomic design, directional pad, analog sticks, action buttons, and central control panel.
Features
- Directional Key Adjustment Unit: Customize the angle (0-20 degrees) and diagonal input sensitivity (3 stages) of the directional pad for precise control tailored to different game genres.
- Rapid-fire Setting & Hold Function: Program buttons for rapid-fire. The hold function allows continuous rapid-fire without constant button pressing.
- Quick Turbo Button: A dedicated button on the back for instant ON/OFF switching of rapid-fire, useful for skipping dialogues or quick selections in RPGs and simulation games.
- Rapid-fire Speed Switching: Choose from three rapid-fire speeds: approximately 5, 12, or 20 times per second. Applicable to both hold and quick turbo modes.
- Enhanced Analog Sticks: Enlarged sticks with a concave top design for improved grip and control. Analog stick sensitivity can be adjusted in 3 stages.
- Analog Button Support & Trigger L2/R2: All main buttons support analog input, allowing for pressure-sensitive actions in compatible games. The L2 and R2 buttons feature a trigger-style design, optimized for FPS/TPS gameplay.
Setup
- Connect to PlayStation 3: Locate an available USB port on your PlayStation 3 console.
- Plug in the USB Cable: Insert the USB connector of the HORIPAD3 PRO. controller into the USB port on the console. The controller uses a wired connection with an approximate cable length of 3 meters.
- Power On: Turn on your PlayStation 3 console. The controller should be automatically recognized.
- Assign Controller Number: If prompted, assign the controller to a player number (e.g., Controller 1).
Note: This controller is designed for PlayStation 3 and connects via a USB cable. It does not support wireless functionality or motion sensing.
Operating Instructions
Directional Key Adjustment
- Angle Adjustment: Use the "ANALOG CONTROL" switch to adjust the angle of the directional keys. This allows for a tilt of 0 to 20 degrees, providing a comfortable playing position.
- Input Range Adjustment: The sensitivity of diagonal input for the directional keys can be set to 3 different stages. Adjust this based on the game's requirements for precise movement.
Rapid-fire and Quick Turbo Functions
- Setting Rapid-fire: Refer to the controller's specific button mapping for setting up rapid-fire on desired buttons. Once set, the rapid-fire function activates while the button is pressed.
- Rapid-fire Hold: Activate the rapid-fire hold function to maintain continuous rapid-fire without needing to hold the button down.
- Quick Turbo Button: Located on the back of the controller, this button allows for quick toggling of rapid-fire ON/OFF without pre-configuration. Ideal for quick actions like skipping text.
- Rapid-fire Speed: Use the "SPEED" switch to cycle through three rapid-fire speeds: 5, 12, or 20 presses per second.
Analog Stick Sensitivity
- The sensitivity of both analog sticks can be adjusted in 3 stages to suit your preference and game requirements.
Maintenance
- Cleaning: Use a soft, dry cloth to wipe the controller. For stubborn dirt, slightly dampen the cloth with water and then wipe dry. Avoid using harsh chemicals or abrasive cleaners.
- Storage: Store the controller in a cool, dry place away from direct sunlight and extreme temperatures. Avoid tangling the USB cable.
- Cable Care: Do not pull on the cable to disconnect the controller. Always grasp the USB plug firmly.
Troubleshooting
| Problem | Solution |
|---|---|
| Controller not responding. | Ensure the USB cable is securely connected to both the controller and the PlayStation 3 console. Try a different USB port. Restart the console. |
| Buttons (e.g., SELECT, START) are unresponsive. | Check for any physical obstructions or debris around the buttons. If the issue persists, the internal mechanism might be faulty. |
| Accidental activation of Quick Turbo button. | The Quick Turbo button is located on the back. Adjust your grip to avoid unintentional presses. Some users may find it beneficial to modify their grip or consider disabling the button if possible (though not officially supported). |
| L2/R2 buttons are too sensitive or register multiple presses. | This can be a characteristic of the trigger design. Practice with the controller to adapt to its sensitivity. If the issue is severe, it might indicate a defect. |
| Analog sticks drift or do not center properly. | Ensure the analog stick sensitivity is set appropriately. If drift persists, it may indicate wear or damage to the analog stick mechanism. |
Specifications
- Model: HORIPAD3 PRO.
- Connection Method: USB Cable
- Cable Length: Approximately 3 meters (9.8 feet)
- Dimensions: 22.6 x 13 x 8.9 cm (8.9 x 5.1 x 3.5 inches)
- Weight: 339 g (0.75 lbs)
- Compatibility: PlayStation 3
- Features: Directional key adjustment, Rapid-fire (5/12/20 times/sec), Rapid-fire hold, Quick Turbo button, Analog stick sensitivity adjustment, Analog buttons, Trigger L2/R2.
Warranty and Support
For warranty information and technical support, please refer to the official HORI website or contact their customer service department. Keep your purchase receipt as proof of purchase for any warranty claims.
Note: This product is not a licensed product of Sony Computer Entertainment Inc.