Product Overview
The Brodit ProClip 832863 is a custom-fit mounting platform designed for specific vehicle models, providing a secure and stable base for attaching various Brodit device holders. It ensures that your mobile phone, GPS, PDA, or tablet is always within reach and view without obstructing your driving or damaging the vehicle's interior.
Key Features:
- Custom-fit for Volvo S60 (2000-2004) models, specifically for console mount, angled for left-hand drive vehicles.
- Provides a stable and secure mounting point for Brodit device holders.
- Designed for quick and easy installation without special tools or drilling.
- Does not damage the vehicle's interior upon installation or removal.
- Ensures clear visibility by mounting on the dashboard, not the windscreen or air vents.
Installation Guide
The Brodit ProClip is designed for straightforward installation, typically taking only one minute. No special tools are required, and no drilling into your vehicle's dashboard is necessary.
Box Contents:
- Brodit ProClip 832863
- Brodit "Gap Opener" (tool to assist installation)
- Pre-drilled holes (AMPS hole size) for easy attachment of Brodit device holders.
- Note: The 4 mounting screws for connecting the ProClip to a Brodit device holder are included with the device holder, not the ProClip itself.
Installation Steps:
- Locate the designated mounting position on your vehicle's console, specifically for the Volvo S60 (2000-2004) model. The ProClip is designed to fit precisely into the gap between the console and the dashboard.
- Use the provided "Gap Opener" to gently create a small opening in the seam where the ProClip will be inserted. This prevents damage to the dashboard.
- Insert the upper edge of the ProClip into the gap. Ensure it is firmly seated.
- Press the lower part of the ProClip firmly into the console until it snaps securely into place.
- Once the ProClip is installed, you can attach your specific Brodit device holder to the pre-drilled holes on the ProClip using the screws provided with the device holder.
Operation
The Brodit ProClip serves as a robust and stable base for attaching any compatible Brodit device holder. Once the ProClip is securely installed in your vehicle, you can easily mount your specific device holder (e.g., for a smartphone, GPS, or tablet) onto the pre-drilled holes on the ProClip.
Brodit offers a wide range of device holders, including both active holders (with charging functionality) and passive holders (without charging functionality), designed for various devices such as Apple iPhones/iPads and Android smartphones/tablets.
Ensure that the device holder is securely fastened to the ProClip using the screws provided with the device holder.
Maintenance
The Brodit ProClip requires minimal maintenance. To keep it clean, simply wipe the surface with a soft, damp cloth. Avoid using harsh chemicals or abrasive cleaners, as these may damage the plastic material.
Regularly check that the ProClip remains securely fastened in its mounting position. If it feels loose, gently press it back into place following the installation steps.
Troubleshooting
ProClip feels loose after installation:
Ensure that both the upper and lower parts of the ProClip are fully inserted and snapped into their respective positions as described in the installation steps. The "Gap Opener" should be used to ensure sufficient space for insertion without forcing the clip.
Device holder does not fit the ProClip:
Verify that you are using a Brodit device holder designed to attach to a ProClip. All Brodit device holders are designed with AMPS hole size for compatibility. Ensure the screws provided with the device holder are used for attachment.
Damage to vehicle interior during installation:
The Brodit ProClip is designed to be installed without damaging the vehicle's interior. Ensure the "Gap Opener" is used to create space, and avoid excessive force during insertion. If you encounter resistance, re-check the mounting position and ensure it matches your vehicle model (Volvo S60 00-04).
Specifications
| Attribute | Detail |
|---|---|
| Brand | Brodit |
| Model Number | 832863 |
| Part Number | 832863 |
| Colour | black |
| Material | Plastic |
| Item Package Quantity | 1 |
| Product Dimensions (L x W x H) | 22 x 14 x 7 cm |
| Item Weight | 10 g |
| Suitable For Vehicle | Volvo S60 (2000-2004) |
| Mounting Position | Console mount, angled for left-hand drive vehicles |
Warranty and Support
For information regarding the product warranty, please refer to the documentation provided with your purchase or visit the official Brodit website. Support for installation or product-related inquiries can also be found on the manufacturer's website or by contacting your authorized reseller.
