Introduction
This manual provides instructions for the StarTech.com 6ft High Speed HDMI Cable with Ethernet (Model: HDMIMM6HS). This cable is designed to connect HDMI-enabled devices, supporting resolutions up to 4K at 30Hz, Full HD 1080p at 120Hz, and includes an Ethernet data channel. It facilitates high-quality digital video and multi-channel audio transmission between compatible equipment.
Product Features
- High Speed HDMI with Ethernet: Supports 4K (3840x2160p, 24, 25, 30Hz | 4096x2160p, 24Hz), Full HD (1920x1080p, 120Hz), 10.2 Gbps bandwidth, wide aspect ratio, and 8-channel audio (5.1/7.1/DD+/Dolby TrueHD).
- Durable Construction: Features a fully molded design with a durable PVC jacket and flexible PVC strain relief to prevent fraying and damage.
- Quality Components: Constructed with 28AWG wire, gold-plated connectors, and superior EMI shielding (Al-Mylar foil with 85% copper braid coverage) for enhanced signal integrity.
- Versatile Applications: Suitable for connecting laptops, workstations, and soundbars to UHD/4K monitors, projectors, or large displays in various environments.
- Specifications: 6 ft (1.8 m) length, black color, HDMI 1.4b standard, male-to-male connectors, supports ARC, Deep Color, HDCP 1.4, CEC, and YCC601 Color.
Package Contents
The package for the StarTech.com 6ft High Speed HDMI Cable with Ethernet (HDMIMM6HS) includes:
- 1 x 6 ft High Speed HDMI Cable with Ethernet (HDMI - Male/Male)
Image: The StarTech.com 6ft High Speed HDMI Cable with Ethernet, shown inside its retail packaging, indicating the product and its length.
System Requirements
To use this HDMI cable, you will need:
- Two devices with available HDMI ports (e.g., computer, Blu-ray player, gaming console, TV, monitor, projector).
- For Ethernet functionality, both connected devices must support HDMI Ethernet Channel (HEC).
Setup Instructions
Follow these steps to connect your devices using the HDMI cable:
- Ensure both source and display devices are powered off before making connections.
- Locate the HDMI output port on your source device (e.g., computer, Blu-ray player).
- Locate an available HDMI input port on your display device (e.g., TV, monitor, projector).
- Connect one end of the StarTech.com HDMI cable to the HDMI output port of your source device.
- Connect the other end of the HDMI cable to the HDMI input port of your display device. Ensure both connectors are fully seated.
- Power on your display device, then your source device.
- Select the correct HDMI input on your display device using its remote control or on-screen menu.
Image: A view of the StarTech.com 6ft HDMI cable, highlighting its two gold-plated male connectors, ready for connection.
Image: A close-up of one end of the StarTech.com HDMI cable, showing the gold-plated connector and its robust design.
Operation
Once connected, the StarTech.com HDMI cable operates automatically. It transmits digital video and audio signals between your connected devices. For optimal performance:
- Ensure your source device is configured to output video and audio through its HDMI port.
- Verify your display device is set to the correct HDMI input.
- For 4K resolution, ensure both your source and display devices support 4K at 30Hz.
- To utilize the HDMI Ethernet Channel (HEC), both connected devices must be HEC-compatible.
Maintenance
The StarTech.com HDMI cable requires minimal maintenance. To ensure longevity and reliable performance:
- Cleaning: Gently wipe the cable and connectors with a dry, lint-free cloth. Avoid using liquid cleaners or solvents.
- Storage: When not in use, store the cable in a cool, dry place, away from direct sunlight and extreme temperatures. Avoid tight coiling or sharp bends.
- Handling: Always grasp the connector housing when plugging or unplugging the cable. Avoid pulling on the cable itself, as this can damage internal wires or connectors.
- Protection: Do not expose the cable to excessive force, moisture, or corrosive substances.
Troubleshooting
If you encounter issues with your HDMI cable, refer to the following troubleshooting steps:
- No Video/Audio:
- Ensure both ends of the HDMI cable are securely connected to the respective ports.
- Verify that your display device is set to the correct HDMI input source.
- Check the power status of both your source and display devices.
- Try connecting a different HDMI cable (if available) to rule out a cable issue.
- Test the cable with different source and display devices if possible.
- Poor Picture Quality (Flickering, Distortion):
- Ensure the cable is not bent sharply or kinked, which can damage internal wiring.
- Reduce the resolution or refresh rate on your source device to see if the issue persists.
- Check for any sources of electromagnetic interference near the cable.
- No Ethernet Functionality:
- Confirm that both connected devices (source and display) support the HDMI Ethernet Channel (HEC) feature.
- Refer to the user manuals of your source and display devices for HEC setup instructions.
Specifications
| Attribute | Value |
|---|---|
| Brand | StarTech |
| Model Number | HDMIMM6HS |
| Cable Length | 6 ft (1.8 m) |
| Color | Black |
| Connector Type | HDMI Male-to-Male |
| HDMI Standard | HDMI 1.4b (backward compatible) |
| Bandwidth | 10.2 Gbps |
| Supported Resolutions | Up to 4K (3840x2160p @ 30Hz), Full HD (1920x1080p @ 120Hz) |
| Audio Support | 8-channel audio (5.1/7.1/DD+/Dolby TrueHD) |
| Special Features | HDMI Ethernet Channel (HEC), Audio Return Channel (ARC), Deep Color, HDCP 1.4, CEC, YCC601 Color |
| Wire Gauge | 28 AWG |
| Connector Plating | Gold-plated |
| Jacket Material | PVC - Polyvinyl Chloride |
| Shielding | Al-Mylar foil with 85% copper braid coverage |
| Product Dimensions | 7.87 x 8.66 x 0.79 inches (packaging) |
| Item Weight | 4.5 ounces |
| UPC | 065030842693 |
Safety Information
Please read and understand the following safety warnings before using this product:
Image: A safety warning label from StarTech.com, detailing potential hazards and precautions for cable usage.
- Electrical Hazards: Do not use damaged or frayed cables. Exposed wires can lead to electric shock, short circuits, or fires. Always ensure cables are properly insulated and connected.
- Trip Hazards: Loose cables across walkways can cause trips and falls. Secure cables along walls or under protective covers to prevent accidents.
- Cable Damage: Avoid excessive pulling, pinching, or bending of cables. Damaged cables can expose wires, pose a risk of sparks, electrical shock, and device failure.
- Heat Buildup: Do not bundle cables too tightly, as this can cause overheating and pose a fire hazard. Ensure proper ventilation and avoid bundling power cables.
Warranty and Support
This StarTech.com HDMI cable is backed by a Lifetime Warranty. For technical support or warranty claims, please visit the official StarTech.com website or contact their customer service department.
For more information, visit: www.startech.com
