Winsome 29-Inch Bar Ladder Back Stool (Set of 2) Instruction Manual

Introduction

This manual provides essential instructions for the assembly, safe use, and maintenance of your Winsome 29-Inch Bar Ladder Back Stool set. Please read all instructions carefully before assembly and use to ensure proper function and longevity of your product.

Safety Information

For safe use, ensure to assemble the stool correctly. Do not exceed the maximum weight capacity of 220 pounds (100 kg). Always maintain stability while using the stool and keep it away from wet or unstable surfaces. Children should be supervised when near or using the stools.

Image: A single Winsome 29-inch bar stool with a ladder back design, shown from the front. The stool is made of solid wood with a walnut finish.

Package Contents

Your Winsome 29-Inch Bar Ladder Back Stool set includes the following components:

• 2 x Stool Seats
• 4 x Front Legs
• 4 x Back Legs (with ladder back attached)
• Various crossbars/stretchers
• Assembly hardware (screws, bolts, washers, Allen wrench)
• Instruction sheet

Note: Please inspect all parts for damage or missing components before beginning assembly. Contact customer support if any parts are missing or damaged.

Assembly Instructions

Assembly is required for these stools. It is recommended to have two people for easier assembly. A Philips head screwdriver (not included) may also be helpful in addition to the provided Allen wrench.

1. Unpack Components: Carefully remove all parts from the packaging and lay them out on a clean, soft surface to prevent scratching.
2. Attach Legs to Seat: Secure the front and back legs to the underside of the stool seat using the provided bolts and washers. Do not fully tighten bolts at this stage.
3. Install Crossbars/Stretchers: Connect the crossbars between the legs. Ensure all parts are aligned correctly.
4. Tighten All Fasteners: Once all components are loosely assembled and aligned, gradually tighten all bolts and screws until secure. Avoid overtightening to prevent damage to the wood.
5. Final Check: Ensure the stool is stable and all connections are firm before use.

Image: Two assembled Winsome 29-inch bar stools with ladder backs, positioned in a room with a purple wall and wooden floor.

Usage Guidelines

• Use the stools on a flat, stable surface to prevent tipping.
• Do not stand on the stool.
• Distribute weight evenly when sitting.
• Avoid sudden movements or leaning excessively to one side.
• The 29-inch seat height is designed to pair with standard counters or high pub tables.

Maintenance and Care

To maintain the appearance and extend the life of your Winsome bar stools:

• Clean with a damp wash cloth.
• Avoid harsh chemicals, abrasive cleaners, or polishes that may damage the finish.
• Wipe up spills immediately to prevent staining.
• Periodically check and retighten all fasteners to ensure stability.
• Keep the stools away from direct sunlight and extreme temperature changes to prevent wood warping or fading.

Image: A graphic displaying icons for product care, including cleaning with a damp cloth, step-by-step assembly, quality packaging, sustainable materials, and customer service availability.

Troubleshooting

Specifications

Image: A Winsome 29-inch bar stool with its key dimensions (height, width, depth) labeled for reference.

Warranty and Support

Winsome products are designed for quality and durability. For specific warranty information or assistance with your product, please refer to the documentation included in your package or visit the official Winsome website. For customer support, please contact your retailer or the manufacturer directly.

For additional information, you may visit the Winsome Store on Amazon.