Product Overview
The Canarm IOL156BK Treehouse 3-Light Outdoor Post-Light is designed to add welcoming illumination and character to the exterior of your home. This post lamp features a transitional style with a black finish and clear glass, suitable for various outdoor settings. It requires three 100W Type A bulbs (not included).
Figure 1: Front view of the Canarm IOL156BK Treehouse 3-Light Outdoor Post-Light, showcasing its black finish and clear glass lanterns.
Safety Information
Always follow basic safety precautions when installing, operating, and maintaining electrical fixtures. Failure to do so may result in fire, electric shock, or personal injury.
- Ensure power is turned off at the circuit breaker before installation or maintenance.
- Consult a qualified electrician if you are unsure about the installation process.
- Use only bulbs of the specified wattage and type (3 x 100W Type A).
- This fixture is rated for wet locations, but proper sealing during installation is crucial.
- Do not attempt to modify the fixture.
Package Contents
Verify that all components are present before beginning installation. If any parts are missing or damaged, do not proceed with installation and contact Canarm customer support.
- Post Light Fixture (Main Assembly)
- Clear Glass Panels (Pre-installed or separate, verify upon unboxing)
- Mounting Hardware (Included Components)
- Instruction Manual (This document)
Note: Bulbs are not included and must be purchased separately.
Setup and Installation
This outdoor post light requires a stable base for installation. Professional installation is recommended for optimal safety and performance, especially if a new concrete base is required.
Tools Required (Not Included):
- Screwdriver (Phillips and Flathead)
- Wire Strippers
- Electrical Tape
- Adjustable Wrench
- Safety Glasses
- Work Gloves
Installation Steps:
- Prepare the Installation Area: Ensure the power supply to the installation location is turned off at the main circuit breaker. Clear the area around the existing post or prepare a new concrete base according to local building codes.
- Mount the Fixture: Secure the post light base to the prepared mounting surface using the provided mounting hardware. Ensure the fixture is level and stable.
- Wire the Fixture: Connect the electrical wires from the fixture to the main power supply wires according to standard electrical codes (black to black, white to white, ground to ground). Use wire nuts to secure connections and electrical tape for added insulation.
- Install Bulbs: Carefully screw three 100W Type A incandescent bulbs (or equivalent LED/CFL bulbs) into the sockets.
- Secure Glass Panels (if applicable): If glass panels are not pre-installed, carefully insert them into the fixture's lantern sections.
- Test Operation: Restore power at the circuit breaker and test the light fixture.
Figure 2: The Canarm IOL156BK post light installed in an outdoor setting, demonstrating its aesthetic integration into a home's exterior.
Operating Instructions
The Canarm IOL156BK Treehouse Post-Light operates via a standard electrical switch (Push Button Switch Type, as per specifications) connected to its power source. There are no complex controls or settings on the fixture itself.
- Turning On/Off: Use the wall switch or external timer/sensor connected to the light's circuit to turn the light on or off.
- Bulb Replacement: To replace bulbs, ensure power is off at the circuit breaker. The bottom of the light "globe" is open, allowing for easy access to change light bulbs. Unscrew the old bulb and screw in a new 100W Type A bulb (or equivalent).
Figure 3: A close-up view of one of the light fixtures, illustrating the clear glass and the bulb socket for easy replacement.
Maintenance
Regular maintenance will help preserve the appearance and functionality of your outdoor post light.
- Cleaning: Periodically clean the fixture with a soft, damp cloth. Avoid abrasive cleaners or solvents that could damage the finish or glass. Ensure the power is off before cleaning.
- Bulb Check: Inspect bulbs regularly and replace them as needed.
- Structural Integrity: Occasionally check the mounting and overall structure for any signs of loosening or damage. Tighten screws if necessary.
- Glass Condition: Inspect glass panels for cracks or damage. Replace if necessary to maintain weather resistance.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on. |
|
|
| Light flickers. |
|
|
| Water inside fixture. |
|
|
If the problem persists after attempting these solutions, contact a qualified electrician or Canarm customer support.
Specifications
| Attribute | Detail |
|---|---|
| Brand | Canarm |
| Model Number | IOL156BK |
| Style | Treehouse |
| Color | Black |
| Material | Steel/Aluminum Diecast |
| Product Dimensions (H x W x D) | 82" H x 28.5" W x 28.5" D |
| Indoor/Outdoor Usage | Outdoor |
| Power Source | Corded Electric |
| Installation Type | Semi Flush Mount |
| Light Source Type | Incandescent |
| Shade Material | Glass (Clear) |
| Number of Light Sources | 3 |
| Voltage | 120 Volts |
| Bulb Base | E26 Medium |
| Max Wattage per Bulb | 100W (Type A) |
| Water Resistance Level | Water Resistant (Rated for wet locations) |
| Assembly Required | No (Fixture is Non Removable) |
| Item Weight | 17.21 pounds |
| UPC | 062345276830, 735090178772 |
Warranty and Support
The Canarm IOL156BK Treehouse 3-Light Outdoor Post-Light comes with a 1-year warranty from the date of purchase. This warranty covers defects in materials and workmanship under normal use.
For warranty claims, technical support, or missing parts, please contact Canarm customer service. Keep your proof of purchase for warranty validation.
Canarm Customer Support:
- Visit the official Canarm website for contact information.
- Refer to the packaging or included documentation for specific contact details.
Note: The warranty does not cover damage caused by improper installation, misuse, accidents, or unauthorized modifications.