Modern Home Set of 2 White Leather Barstool Instruction Manual

1. Product Overview

This manual provides instructions for the assembly, operation, and maintenance of your Modern Home Set of 2 White Leather Barstools. Please read all instructions carefully before assembly and use.

Image 1.1: Modern Home White Leather Barstool with indicated dimensions. The barstool features a white leather seat, chrome-plated frame, and a circular base. The overall height is 22 inches, width is 17 inches, and depth is 14 inches.

2. Safety Information

• Ensure all parts are present and undamaged before assembly.
• Do not stand on the barstool.
• Do not exceed the maximum weight capacity (not specified, use with caution).
• Keep children away during assembly.
• Periodically check all bolts and connections to ensure they remain tight.

3. Package Contents

Please verify that all components are included in your package:

• 2 x Seat Cushions (White Leather)
• 2 x Backrests (Integrated with seat cushion)
• 2 x Chrome-plated Frames with Footrests
• 2 x Gas Lift Cylinders
• 2 x Circular Bases
• 1 x Hardware Pack (screws, washers, Allen wrench)

4. Setup and Assembly

Follow these steps to assemble your barstools:

1. Unpack Components: Carefully remove all parts from the packaging and lay them out on a soft, clean surface to prevent scratches.
2. Attach Frame to Seat: Align the chrome-plated frame with the pre-drilled holes on the underside of the seat cushion. Secure using the provided screws and Allen wrench. Do not overtighten.
3. Insert Gas Lift Cylinder: Insert the narrow end of the gas lift cylinder into the center hole of the circular base. Ensure it is seated firmly.
4. Connect Seat Assembly to Gas Lift: Carefully place the assembled seat and frame onto the wider end of the gas lift cylinder. The weight of the seat will secure it in place.
5. Final Check: Ensure all connections are secure and the barstool is stable before use. Repeat for the second barstool.

5. Operating Instructions

Height Adjustment

To adjust the height of the barstool, locate the lever typically found under the seat. While seated, pull the lever up to lower the seat. To raise the seat, stand up and pull the lever up; the gas lift will extend the seat upwards. Release the lever at the desired height.

Swivel Function

The barstool seat is designed to swivel 360 degrees. Simply rotate the seat to your desired position.

6. Maintenance and Care

Proper care will extend the life and appearance of your barstools:

• Cleaning the Leather Seat: Wipe with a damp cloth. For tougher stains, use a mild leather cleaner specifically designed for white leather. Avoid abrasive cleaners or harsh chemicals.
• Cleaning the Chrome Base: Use a soft, dry cloth to wipe away dust. For smudges or fingerprints, a slightly damp cloth with a mild, non-abrasive cleaner can be used, followed by drying with a clean cloth.
• Regular Inspection: Periodically check all screws and connections to ensure they are tight. Retighten as necessary to maintain stability.
• Avoid Direct Sunlight: Prolonged exposure to direct sunlight can cause the leather to fade or crack.

7. Troubleshooting

• Barstool is Wobbly: Ensure all assembly screws are tightened securely. Check that the gas lift cylinder is properly seated in both the base and the seat mechanism.
• Height Adjustment Not Working: Verify that the gas lift lever is correctly connected to the gas lift cylinder. Ensure no obstructions are preventing the lever from engaging the cylinder. If the gas lift is faulty, it may need replacement.
• Squeaking Noise: Apply a small amount of silicone-based lubricant to moving parts, such as the swivel mechanism or where the gas lift meets the seat plate.

8. Specifications

9. Warranty Information

No specific warranty information is provided for this product. Please refer to your retailer's return policy or contact the seller directly for details regarding any applicable warranty or guarantee.

10. Support

For further assistance or inquiries, please contact the seller or retailer from whom you purchased this product. Please have your model number (B004VWXR9Y) and purchase date available when contacting support.