Introduction
This manual provides detailed instructions for the proper use, setup, maintenance, and care of your Orient Men's FEM75004B9 Mako XL Stainless Steel Watch. Please read this manual thoroughly to ensure optimal performance and longevity of your timepiece.
Product Overview
The Orient Mako XL FEM75004B9 is an automatic stainless steel watch designed for durability and functionality. It features a robust construction suitable for various activities, including water sports.
- Movement: Japanese-automatic movement with analog display.
- Case: 44.5 mm stainless steel case with a mineral dial window.
- Bezel: Round watch featuring a unidirectional bezel.
- Date Display: Date window located at three o'clock.
- Bracelet: Stainless steel band with a fold-over clasp and double push-button safety.
- Water Resistance: Water resistant to 200 meters (660 ft), suitable for professional marine activity and serious surface water sports.
Front view of the Orient Mako XL FEM75004B9 watch, showcasing the dial, bezel, and stainless steel bracelet.
Setup
1. Initial Winding and Setting Time
- Unscrew the Crown: The crown is located on the right side of the watch case. Rotate it counter-clockwise until it is free from the case.
- Manual Winding (Initial): While the crown is in the first position (unscrewed, but not pulled out), rotate it clockwise approximately 30-40 times to provide an initial power reserve. This watch features an automatic movement and will self-wind with wrist motion, but manual winding is recommended for initial setup or after extended periods of inactivity.
- Setting the Date: Pull the crown out to the second click position. Rotate the crown clockwise or counter-clockwise to adjust the date. Avoid setting the date between 9:00 PM and 3:00 AM, as this can damage the movement. If the current time falls within this period, adjust the time outside this range first, set the date, then reset the time.
- Setting the Time: Pull the crown out to the third click position. Rotate the crown to set the hour and minute hands. Ensure the AM/PM is correctly set by observing the date change. If the date changes at noon, you are 12 hours off.
- Secure the Crown: Once the time and date are set, push the crown back into the first position and screw it clockwise firmly against the case to ensure water resistance.
2. Adjusting the Bracelet
The stainless steel bracelet can be adjusted by adding or removing links. This procedure typically requires specialized tools and is best performed by a qualified watchmaker or jeweler to prevent damage to the bracelet or watch.
The Orient Mako XL FEM75004B9 watch worn on a wrist, illustrating its size and fit.
Operating Instructions
Automatic Movement
Your Orient Mako XL watch is powered by a Japanese-automatic (self-winding) movement. This means it does not require a battery. The watch is powered by the natural motion of your wrist. When worn regularly, the rotor inside the watch winds the mainspring, keeping the watch powered. If the watch is not worn for an extended period, it may stop. Simply follow the initial winding steps in the "Setup" section to restart it.
Unidirectional Bezel
The watch features a unidirectional rotating bezel, which rotates only counter-clockwise. This feature is primarily used for timing events, such as dive times, to prevent accidental overestimation of elapsed time. To use:
- Rotate the bezel so that the zero marker aligns with the minute hand.
- As time passes, the minute hand will indicate the elapsed time against the bezel's markings.
Water Resistance (200m / 660ft)
This watch is water resistant to 200 meters (660 feet). This rating indicates suitability for professional marine activity and serious surface water sports. It is not intended for scuba diving, which requires watches with higher water resistance ratings (e.g., 300m or more) and specific dive features.
- Always ensure the crown is fully screwed down before exposing the watch to water.
- Do not operate the crown or push-buttons (if any) while the watch is submerged or wet.
- After exposure to saltwater, rinse the watch with fresh water and dry it thoroughly.
Maintenance and Care
Cleaning
To maintain the appearance of your watch:
- Wipe the case and bracelet regularly with a soft, dry cloth.
- For stubborn dirt, especially on the metal bracelet, use a soft brush with mild soapy water. Ensure the crown is fully screwed down before using water. Rinse thoroughly with fresh water and dry immediately.
- Avoid using chemical cleaners, solvents, or abrasive materials, as these can damage the watch's finish or seals.
Storage
When not wearing your watch for extended periods, store it in a cool, dry place away from direct sunlight, extreme temperatures, and strong magnetic fields. A watch box or pouch is recommended to protect it from dust and scratches.
Periodic Servicing
Like any precision mechanical instrument, your automatic watch benefits from periodic servicing. It is recommended to have your watch inspected and serviced by an authorized service center every 3-5 years to ensure its accuracy and water resistance seals remain intact.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Watch has stopped or is running inaccurately. | Insufficient power reserve. | Manually wind the watch by rotating the crown clockwise (in the first position) approximately 30-40 times. Wear the watch regularly to keep it wound. |
| Date does not change at midnight. | AM/PM setting is incorrect. | Pull the crown to the third click position and advance the time by 12 hours. Reset the correct time. |
| Condensation under the crystal. | Indicates a potential breach in water resistance or extreme temperature change. | Immediately take the watch to an authorized service center for inspection and repair to prevent internal damage. |
| Crown cannot be screwed down. | Cross-threaded or debris in the crown tube. | Do not force the crown. Gently try to align and screw it down. If it still doesn't screw down, seek assistance from a watchmaker to avoid damaging the threads and compromising water resistance. |
Specifications
| Model Number | FEM75004B9 |
| Movement Type | Japanese Automatic (Self-winding), 21-jewel |
| Case Material | Solid Stainless Steel |
| Case Diameter | 44.5 mm (excluding crown) |
| Case Thickness | 13 mm |
| Dial Window Material | Mineral |
| Band Material | Stainless Steel |
| Band Width | 22 mm |
| Clasp Type | Fold-over clasp with double push-button safety |
| Water Resistance | 200 meters (660 feet) |
| Item Weight | 192.78 g (6.8 Ounces) |
| Product Dimensions | 12 x 12 x 12 cm |
The Orient Mako XL FEM75004B9 watch presented in its original box.
Warranty and Support
Warranty Information
Your Orient Mako XL FEM75004B9 watch comes with a 1-Year Manufacturer's Warranty. This warranty covers manufacturing defects under normal use. For specific terms and conditions, please refer to the warranty card included with your purchase or contact the seller of record.
The warranty does not cover damage resulting from improper handling, accidents, unauthorized repairs, or normal wear and tear.
Customer Support
For technical assistance, service requests, or warranty claims, please contact the authorized Orient service center or the retailer from whom you purchased the watch. Ensure you have your proof of purchase and warranty information available.
For general inquiries, you may visit the official Orient Watch website for further information and contact details.
