Camelbak BFM 3L Coyote User Manual

Introduction

Welcome to the user manual for your Camelbak BFM 3L Coyote backpack. This robust and versatile backpack is designed for demanding outdoor activities, offering significant storage capacity and an integrated hydration system. Please read this manual thoroughly to ensure proper use, maintenance, and longevity of your product.

Product Overview

The Camelbak BFM is a durable and spacious backpack featuring multiple compartments and an integrated hydration system. It is designed to accommodate additional Camelbak Mobaks, allowing for a total water reserve of up to 9 liters.

Key Features:

• Large main compartment that opens completely.
• Internal adjustable fastening straps with clip closures.
• Two flat mesh pockets on the lid.
• Organizer compartment with zipper and radio equipment supports.
• External zippered tray with MOLLE loops and Velcro patch area.
• Efficient lower compartment with four mesh pockets.
• Two side pockets with MOLLE loops.
• Three carrying handles.
• Three hydration tube exits.
• Padded and ventilated back panel.
• Removable frame plate and back panel.
• Padded shoulder straps.
• Height-adjustable chest strap.
• Padded and removable hip belt.
• Side compression straps.
• Material: 100% Cordura 500D Dupont Nylon.
• Hydration Reservoir Capacity: 3.0 Liters.
• Cargo Capacity: 48 Liters.

Product Image

This image displays the Camelbak BFM 3L Coyote backpack in its full view. It highlights the robust construction, the coyote color, the various external pockets, MOLLE webbing for attachments, and the hydration tube extending from the left shoulder strap. The backpack features a large main compartment, smaller accessory pockets, and a durable nylon exterior.

Setup

Hydration Reservoir Preparation

1. Remove Reservoir: Carefully pull the hydration reservoir out of its dedicated compartment, usually located at the back of the main compartment.
2. Fill Reservoir: Open the reservoir's fill port (typically a large screw cap or slide closure). Fill with clean water. Do not overfill.
3. Secure Closure: Ensure the fill port is securely closed to prevent leaks.
4. Insert Reservoir: Slide the filled reservoir back into its compartment.
5. Route Tube: Thread the hydration tube through one of the designated tube exits (top left or right) and along a shoulder strap. Secure the bite valve to the chest strap or a convenient location for easy access.

Backpack Adjustment

1. Shoulder Straps: Loosen all straps. Put on the backpack. Adjust the shoulder straps so the pack sits comfortably on your back, with the weight distributed evenly.
2. Hip Belt: If equipped, fasten the hip belt around your hips. Tighten it so that a significant portion of the pack's weight rests on your hips, not just your shoulders.
3. Chest Strap: Fasten the chest strap across your sternum. Adjust its height and tension for comfort and to stabilize the shoulder straps.
4. Compression Straps: Use the side compression straps to cinch down the load and prevent shifting, especially if the pack is not full.

Operating Instructions

Using the Hydration System

1. Bite Valve: To drink, gently bite down on the bite valve and suck.
2. Shut-off Valve: Many Camelbak reservoirs have a shut-off valve near the bite valve. Ensure it is in the "open" position before drinking and "closed" when not in use to prevent leaks.
3. Refilling: Refill the reservoir as needed, following the steps in the "Setup" section.

Packing the Backpack

Utilize the various compartments for organized storage. Place heavier items closer to your back and centered for better balance. Use the internal compression straps to secure contents.

MOLLE Webbing

The external MOLLE webbing allows for attachment of compatible pouches and accessories, expanding the pack's carrying capacity and customization options.

Maintenance

Cleaning the Hydration Reservoir

1. Empty and Rinse: After each use, empty any remaining water and rinse the reservoir thoroughly with warm water.
2. Clean with Soap: For a deeper clean, use mild soap and water. Camelbak offers cleaning kits with brushes for the reservoir and tube.
3. Dry Completely: It is crucial to dry the reservoir completely to prevent mold and mildew. Use a reservoir dryer or hang it upside down with the opening propped open.
4. Tube Cleaning: Flush the tube with clean water. If necessary, use a small brush designed for hydration tubes.

Cleaning the Backpack

1. Spot Clean: For minor dirt, use a damp cloth and mild soap to spot clean the nylon fabric.
2. Hand Wash: For a more thorough clean, hand wash the backpack in a tub with cool water and mild detergent. Do not use bleach or harsh chemicals.
3. Air Dry: Hang the backpack to air dry completely, away from direct sunlight or heat. Do not machine wash or tumble dry.

Storage

Store the backpack in a cool, dry place, away from direct sunlight. Ensure both the pack and reservoir are completely dry before storage.

Troubleshooting

Leaking Hydration Reservoir

• Check Cap/Closure: Ensure the fill port is securely tightened or the slide closure is fully engaged.
• Bite Valve: Verify the bite valve is not damaged and the shut-off valve (if present) is fully closed when not in use.
• Tube Connection: Check that the tube is securely connected to the reservoir.

Difficulty Drinking from Bite Valve

• Shut-off Valve: Ensure the shut-off valve is in the "open" position.
• Air Lock: Sometimes an air bubble can get trapped. Try re-positioning the reservoir or gently squeezing it.
• Kinked Tube: Check for any kinks in the hydration tube.

Backpack Discomfort

• Adjust Straps: Re-adjust shoulder, hip, and chest straps to ensure proper weight distribution.
• Load Distribution: Repack the backpack, placing heavier items closer to your back and centered.
• Overloading: Ensure you are not exceeding the recommended cargo capacity.

Specifications

Warranty and Support

For specific warranty information regarding your Camelbak BFM 3L Coyote backpack, please refer to the documentation included with your purchase or visit the official CamelBak website. Warranty terms typically cover manufacturing defects.

For product support, including spare parts or technical assistance, please contact CamelBak customer service directly or the authorized retailer from whom you purchased the product.