Trend Lighting Lux Floor Lamp Model TFA9307 Instruction Manual

Product Overview

The Trend Lighting Lux Floor Lamp, Model TFA9307, is a transitional 3-light floor lamp designed to provide ample illumination. It features a brushed nickel finish, a sturdy marble base, and three fully adjustable lamp heads with two-tier sheer snow/shantung shades. This lamp is suitable for various indoor settings, particularly living rooms, and is ideal for general purpose lighting and reading.

Image: The Trend Lighting Lux Floor Lamp, Model TFA9307, showcasing its brushed nickel finish, three adjustable lamp heads, and marble base.

Important Safety Instructions

Please read and understand all instructions before assembling and operating this lamp. Retain this manual for future reference.

• Electrical Safety: Always disconnect the power supply before installation, cleaning, or replacing bulbs. Ensure the lamp is plugged into a 120-volt AC outlet.
• Bulb Wattage: Do not exceed the maximum wattage of 60 watts per bulb. Use only A19 incandescent bulbs as specified. Exceeding the recommended wattage can cause overheating and damage to the lamp or create a fire hazard.
• UL Listed: This product is UL Listed, indicating it meets specific safety standards.
• Stable Placement: Ensure the lamp is placed on a stable, level surface to prevent tipping. The heavy marble base is designed for stability.
• Cord Management: Do not run the power cord under carpets or in areas where it can be tripped over or damaged.
• Local Regulations: Always check and comply with your local electrical codes and regulations before installing or using this product.

Package Contents

Carefully unpack all components and inspect for any damage. Keep all packaging materials until you are satisfied with the product. The package should contain:

• Lamp Fixture (includes base, pole sections, lamp heads, and wiring)
• Three (3) Two-Tier Sheer Snow/Shantung Shades
• Marble Base
• Assembly Hardware (if applicable, typically pre-attached)

Assembly Instructions

Assembly is required for this floor lamp. Follow these general steps:

1. Prepare the Base: Place the marble base on a clean, flat surface where the lamp will be located.
2. Attach Pole Sections: Carefully thread the lowest pole section into the marble base, turning clockwise until secure. Continue to thread subsequent pole sections together, ensuring all wiring passes freely through the center.
3. Connect Lamp Head Assembly: Attach the lamp head assembly (containing the three light sockets) to the top pole section, ensuring all connections are tight.
4. Install Shades: Securely attach the two-tier sheer shades to each of the three lamp heads.
5. Install Bulbs: Insert three (3) A19 incandescent bulbs, not exceeding 60 watts each, into the sockets.
6. Final Check: Ensure all connections are secure and the lamp is stable before plugging it into a power outlet.

Operating Instructions

To operate your Lux Floor Lamp:

• Power Connection: Plug the lamp's cord into a standard 120-volt AC wall outlet.
• Turning On/Off: Locate the power switch (typically a rotary switch or pull chain, depending on the specific design) on the lamp. Turn the switch to the 'ON' position to illuminate the lights and to the 'OFF' position to turn them off.
• Adjusting Lamp Heads: The three lamp heads are fully adjustable. Gently pivot or tilt each head to direct light as desired.

Maintenance

Regular maintenance will help preserve the appearance and functionality of your lamp.

• Cleaning: Disconnect power before cleaning. Use a soft, dry cloth to wipe the brushed nickel finish. For the glass shades, a slightly damp cloth can be used, followed by a dry cloth. Avoid abrasive cleaners or solvents, as they may damage the finish.
• Bulb Replacement: Ensure the lamp is unplugged and the bulbs have cooled completely before attempting to replace them. Unscrew the old bulb and screw in a new A19 incandescent bulb, not exceeding 60 watts.
• Cord Inspection: Periodically inspect the power cord for any signs of damage or fraying. If damage is found, discontinue use and contact a qualified electrician or the manufacturer.

Troubleshooting

If your lamp is not functioning correctly, refer to the following common issues and solutions:

• Lamp Does Not Light Up:
  • Ensure the power cord is securely plugged into a live 120-volt outlet.
  • Check if the wall switch (if applicable) is in the 'ON' position.
  • Verify that the lamp's internal switch is in the 'ON' position.
  • Inspect the bulbs. Replace any burnt-out bulbs with new A19 incandescent bulbs (max 60W).
  • Check the circuit breaker or fuse box to ensure the circuit is active.
• Lights Flicker:
  • Ensure bulbs are screwed in tightly.
  • Replace bulbs that are flickering, as they may be faulty or nearing the end of their lifespan.
  • Check for loose connections in the power cord or outlet.
• Lamp is Unstable:
  • Ensure the lamp is placed on a flat, level surface.
  • Verify that all pole sections are securely tightened to each other and to the base.

If these steps do not resolve the issue, contact customer support.

Specifications

Warranty and Support

Warranty: This Trend Lighting product comes with a 1-year warranty from the date of purchase, covering manufacturing defects. Please retain your proof of purchase for warranty claims.

Customer Support: For technical assistance, replacement parts, or warranty inquiries, please contact Trend Lighting customer service. Refer to the product packaging or the manufacturer's official website for current contact information.