1. Introduction
This manual provides detailed instructions for assembling and maintaining your Bandai Hobby Master Grade 00 Raiser Gundam 1/100 Scale Model Kit. The 00 Raiser, a powerful combination of the 00 Gundam and O Raiser from the "Gundam 00" anime series, is designed for enthusiasts aged 15 and above. This Master Grade kit features intricate details, colored parts, and a light-up gimmick for enhanced display.
Please read all instructions carefully before beginning assembly. This product has been thoroughly tested for safety and meets U.S. consumer product safety regulations. For product support assistance, ensure your kit was purchased from an authorized U.S. retailer, identifiable by a warning label and the Bluefin Distribution logo on the product box.
2. What's in the Box
Your Bandai Hobby MG 00 Raiser 1/100 Scale Model Kit includes:
- 00 Raiser MG 1/100 Model Kit components
- GN-Sword II
- GN Sword III with Raiser sword effect parts
- GN beam sabers
- GN Shield
- Translucent parts for GN Condensers
- Energy tanks (for movie appearance recreation)
- Sticker sheets for detailing
- One LED unit (LR41 Batteries x2 sold separately)
3. Setup and Assembly
Assembly of this Master Grade kit requires no glue, as parts are designed to snap together securely. The parts are pre-colored, minimizing the need for painting, though customization is always an option for experienced builders.
- Part Identification: Carefully identify all runners and individual parts according to the included diagram.
- Cutting Parts: Use a hobby nipper to carefully remove parts from the runners. Ensure clean cuts to avoid stress marks.
- Inner Frame Assembly: Begin by assembling the internal frame of the 00 Gundam. This provides the core structure and articulation.
- Armor Attachment: Attach the pre-colored armor pieces to the inner frame.
- O Raiser Assembly: Assemble the O Raiser unit separately.
- Weapon Assembly: Assemble the GN-Sword II, GN Sword III, GN beam sabers, and GN Shield. The GN Sword III includes effect parts for dynamic display.
- LED Unit Installation: The kit includes one LED unit. LR41 batteries (x2) are required and sold separately. The LED unit can be installed in the chest cavity to illuminate the eyes and GN condensers on the head. Additional LED units (sold separately) can be installed in the GN drives on the shoulders and side binders for further illumination.
Figure 3.1: Fully assembled 00 Raiser Gundam with GN-Sword II.
Figure 3.2: Various weapon components before assembly.
Figure 3.3: Weapon parts with translucent effect blades.
4. Operating and Posing
The 00 Raiser Gundam features excellent articulation due to its robust inner frame, allowing for a wide range of dynamic poses. The O Raiser unit can be attached to the 00 Gundam's back or displayed separately.
- LED Gimmick: To activate the LED in the chest, remove the backpack unit and open the designated hatch to access the LED unit. Turn it on or off as desired.
- Weapon Handling: The GN-Sword II and GN Sword III can be held in the hands. The GN Sword III is a substantial weapon; ensure proper grip for stable posing.
- GN Drives: The model features GN Drives on each shoulder. Translucent parts are used for the various GN Condensers throughout the body.
Figure 4.1: 00 Raiser Gundam posed with dual GN-Sword IIs.
Figure 4.2: The O Raiser unit displayed separately.
Figure 4.3: The 00 Gundam in its standalone configuration.
Figure 4.4: Head detail with activated LED.
Figure 4.5: GN Drive detail with activated LED.
5. Maintenance
To ensure the longevity and appearance of your model kit, follow these maintenance guidelines:
- Cleaning: Dust your model regularly with a soft brush or compressed air. Avoid using harsh chemicals or abrasive materials.
- Storage: Store the model in a cool, dry place away from direct sunlight to prevent discoloration or material degradation.
- Handling: Handle the model by its main body parts to avoid stressing smaller, delicate components.
6. Troubleshooting
While the 00 Raiser is designed for stability, certain configurations may present challenges:
- Back-Heaviness: The O Raiser backpack is substantial. If the model struggles to stand upright with the backpack attached, consider using an action base (sold separately) for improved stability and dynamic aerial poses.
- Loose Joints: If any joints become loose over time, a small amount of clear nail polish or hobby cement applied to the peg (and allowed to dry completely before reassembly) can help tighten them.
7. Specifications
| Attribute | Detail |
|---|---|
| Brand | BANDAI SPIRITS |
| Model Name | 00 Raiser "Gundam 00", Bandai MG |
| Scale | 1:100 |
| Item Dimensions (L x W x H) | 5 x 5 x 7.75 inches |
| Item Weight | 1.6 Pounds |
| Material Type | Plastic (Foil for some parts/stickers) |
| Color | Blue, Clear, White, Red, Grey |
| Age Range (Description) | 15+ |
| Additional Features | Light-up gimmick (LED unit included, batteries sold separately) |
8. Safety Information
WARNING: CHOKING HAZARD - Small parts. Not for children under 3 years. Recommended for ages 15 and up.
9. Warranty and Support
This product comes with no explicit warranty. However, if purchased from an authorized U.S. retailer (identified by the Bluefin Distribution logo on the product box), product support assistance is provided. Please retain your proof of purchase for any support inquiries.
