Product Overview
The Rain Design iRest Lap Stand (Model 10035) is designed to enhance comfort when using your tablet on a sofa or bed. It features soft foam cushions for lap use and a torque hinge for adjustable viewing angles. The stand can also convert into an elegant desktop stand by removing the cushions, making it versatile for various environments like a kitchen counter or office desk. It is compatible with iPad 1/2/3/4/mini, Kindle E-Readers, Kindle Fire, and other tablets with a thickness of less than 0.47 inches.
Setup and Assembly
The iRest Lap Stand comes pre-assembled for immediate use. Follow these steps to set up your stand:
- For Lap Use: Ensure the soft foam cushions are attached to the base of the stand. Place the stand on your lap.
- Positioning Your Tablet: Gently place your iPad or compatible tablet into the designated slot on the stand. The stand's design uses gravity to hold your device securely.
- Adjusting Viewing Angle: Utilize the integrated torque hinge to adjust the tablet's angle to your preferred viewing position. The hinge is designed to hold the angle firmly.
- For Desktop Use: To convert to a desktop stand, carefully remove the soft foam cushions from the base. Place the stand on a flat, stable surface such as a desk or kitchen counter. Position your tablet as described above and adjust the viewing angle.
Image Description: A person is comfortably seated, using the Rain Design iRest Lap Stand to hold an iPad on their lap. The iPad displays text, suggesting reading or browsing. The stand is silver with black foam cushions, providing an ergonomic viewing angle. The person is holding a cup, indicating relaxed use.
Operating Instructions
The iRest Lap Stand is designed for simple and intuitive operation:
- Placing Your Device: Ensure your tablet is within the specified thickness (less than 0.47 inches). Place the bottom edge of your tablet into the front lip of the stand. The back of the tablet will rest against the adjustable support.
- Adjusting the Angle: Gently push or pull the top section of the stand to achieve your desired viewing angle. The torque hinge will maintain the chosen position.
- Switching Orientation: The stand supports both portrait and landscape orientations for your tablet. Simply rotate your device as needed.
- Stability: When using on a lap, ensure the foam cushions are fully resting on your thighs for optimal stability. For desktop use, verify the stand is on a flat, non-slippery surface.
Image Description: A side profile of a person relaxing on a sofa, using the Rain Design iRest Lap Stand to hold an iPad. The stand is positioned on their lap, with the iPad tilted at an ergonomic angle for comfortable viewing. The person is holding a cup, emphasizing leisure use.
Image Description: A close-up, front-facing view of a person's lap, showing the Rain Design iRest Lap Stand holding an iPad. The iPad displays a children's book. A glass of orange juice is visible next to the stand, highlighting casual use.
Maintenance
To ensure the longevity and optimal performance of your Rain Design iRest Lap Stand, follow these maintenance guidelines:
- Cleaning: Wipe the aluminum surfaces with a soft, damp cloth. Avoid abrasive cleaners or solvents that may damage the finish.
- Cushion Care: The foam cushions can be gently cleaned with a mild soap solution and a damp cloth. Ensure they are completely dry before reattaching or using.
- Hinge Longevity: The torque hinge is designed for durability. Avoid excessive force when adjusting the angle. If the hinge loosens over time, contact customer support for guidance.
- Storage: When not in use, store the stand in a clean, dry place away from extreme temperatures.
Troubleshooting
If you encounter any issues with your iRest Lap Stand, refer to the following common solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Stand feels unstable on lap. | Improper placement of cushions or uneven surface. | Ensure foam cushions are fully resting on your thighs. Adjust your sitting position for better balance. |
| Tablet slips from the stand. | Tablet exceeds maximum thickness or is not properly seated. | Verify your tablet's thickness is less than 0.47 inches. Ensure the tablet is firmly placed in the front lip and against the back support. |
| Hinge does not hold desired angle. | Hinge may have loosened over extended use. | The torque hinge is designed to maintain tension. If it consistently fails to hold an angle, contact Rain Design customer support for assistance. |
| Silicon pads on the unit dislodge. | Wear and tear or adhesive failure. | Re-attach with a suitable adhesive if possible. For replacement pads, contact Rain Design customer support. |
Specifications
- Model: 10035
- Material: Aluminum, Plastic
- Color: Silver/Black
- Dimensions (LxWxH): 13.75 x 9 x 3 inches
- Item Weight: 0.9 Lb. (approximately 14.4 ounces)
- Maximum Weight Capacity: 5.0 Lb.
- Features: Adjustable, Portable
- Compatible Devices: Tablets, iPad (1/2/3/4/mini), Kindle E-Readers, Kindle Fire, and other tablets with less than 0.47 inch thickness.
Image Description: The Rain Design iRest Lap Stand is shown on a clean white table, holding an iPad. The stand is silver with black accents, showcasing its design for desktop use. The iPad is positioned at an angle, suitable for viewing recipes or typing with an external keyboard.
Warranty and Support
For warranty information, product support, or to purchase replacement parts, please visit the official Rain Design website or contact their customer service department. Keep your purchase receipt for warranty claims.
Rain Design Official Website: www.raindesigninc.com