SIEMENS Click Dome 10/12 mm Double

Siemens Click Dome 10/12 mm Double for RIC Hearing Aids Instruction Manual

Introduction

The Siemens Click Dome 10/12 mm Double is designed to enhance the performance and comfort of your compatible Receiver-In-Canal (RIC) hearing aids. These domes are essential components that sit at the end of the hearing aid receiver, providing a secure and comfortable fit within the ear canal. They help to optimize sound delivery and minimize feedback, ensuring a clearer listening experience. This manual provides instructions for the proper installation, use, and maintenance of your Click Domes.

These domes are compatible with Signia, Rexton, and Siemens RIC hearing aids.

Setup and Installation

Proper installation of the Click Dome is crucial for both comfort and hearing aid performance. Follow these steps to attach the dome to your hearing aid receiver:

  1. Preparation: Ensure your hands are clean and dry before handling the domes and hearing aid.
  2. Remove Old Dome (if applicable): Gently pull off the existing dome from the hearing aid receiver. Dispose of the old dome properly.
  3. Attach New Dome: Align the new Siemens Click Dome with the end of the hearing aid receiver. Push the dome firmly onto the receiver until you feel and hear a distinct "click." This indicates that the dome is securely attached.
  4. Verify Attachment: Gently tug on the dome to ensure it is firmly seated and will not detach during use.
Siemens Click Dome 10/12 mm Double packaging with six domes

Image: Packaging of Siemens Click Dome 10/12 mm Double, showing six individual domes in a blister pack. The domes are clear and designed for RIC hearing aids.

It is important to use the correct size dome for your ear canal. If you are unsure about the appropriate size, consult with your audiologist.

Operating (Wearing Your Hearing Aid)

Once the Click Dome is securely attached to your hearing aid receiver, you can insert the hearing aid into your ear canal.

  1. Insertion: Gently guide the dome into your ear canal until it feels comfortable and secure. Avoid forcing it.
  2. Comfort Check: The dome should sit comfortably in your ear without causing pain or pressure. If you experience discomfort, try re-adjusting its position.
  3. Sound Quality: Listen for clear sound and minimal feedback. A properly fitted dome helps to seal the ear canal, optimizing sound delivery.

Maintenance

Regular cleaning and timely replacement of your Click Domes are essential for hygiene, optimal performance, and the longevity of your hearing aid.

  • Daily Cleaning: After each use, gently wipe the dome with a clean, dry cloth to remove any earwax or debris. Do not use water or cleaning solutions directly on the dome while it is attached to the hearing aid, as this could damage the receiver.
  • Deep Cleaning (Detached): If necessary, you may detach the dome and gently wash it with mild soap and water. Ensure the dome is completely dry before reattaching it to the receiver.
  • Replacement: Domes should be replaced regularly, typically every few weeks to a month, or sooner if they appear worn, torn, discolored, or if you notice a decrease in sound quality or an increase in feedback. This pack contains 6 domes, providing multiple replacements.

Troubleshooting

If you encounter issues with your Siemens Click Domes, consider the following:

  • Dome Not Staying in Ear: This often indicates an incorrect dome size or improper insertion. Consult your audiologist to confirm you are using the appropriate size (10mm or 12mm) for your ear canal. Ensure the dome is pushed in firmly until it clicks onto the receiver.
  • Poor Sound Quality or Feedback: Check the dome for any blockages from earwax or debris. Clean the dome thoroughly. If the dome is old or damaged, replace it with a new one from the pack. Ensure the dome is securely attached and properly seated in your ear.
  • Dome Detaches from Receiver: Ensure the dome was pushed on firmly until it clicked into place during installation. If the dome consistently detaches, it may be worn out and require replacement.
  • Compatibility Concerns: These domes are specifically designed for Signia, Rexton, and Siemens RIC hearing aids. If you are using a different brand or type of hearing aid, these domes may not be compatible.

Specifications

  • Product Type: Click Domes for RIC Hearing Aids
  • Size: 10/12 mm Double
  • Quantity: 6 Domes per pack
  • Compatibility: Designed for Signia, Rexton, and Siemens Receiver-In-Canal (RIC) hearing aids.
  • Material: Soft silicone (for comfort and secure fit)
  • Manufacturer: Siemens

Important Information and Warranty

Due to hygiene reasons and for your health and safety, this product is not refundable or exchangeable once the packaging has been opened. Please ensure that the size and compatibility are correct for your hearing aid model before opening the product. This policy is in place to maintain the highest standards of hygiene for all users.

Always purchase genuine manufacturer accessories to ensure compatibility and performance with your hearing aids.

Support

For further assistance with fitting, usage, or any persistent issues with your hearing aids or domes, it is recommended to consult your audiologist or hearing care professional. They can provide personalized advice and ensure optimal performance of your hearing devices.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.