HTC 4000 Trans-Web Fusible Web Instruction Manual

Introduction

The HTC 4000 Trans-Web Fusible Web is designed to transform various fabrics into iron-on materials. This product features a polyimide web on release paper, ensuring a complete and uniform adhesive coverage when activated by heat. It is suitable for a wide range of fabric projects, providing a durable bond that withstands machine washing and dry cleaning.

Product Overview

The HTC 4000 Trans-Web Fusible Web is an off-white, 100% polyimide adhesive web. It comes on a release paper, which protects the adhesive until heat is applied. The web measures 16 inches in width by 35 yards in length, offering ample material for multiple projects. This product is manufactured in the USA.

Image: A roll of HTC 4000 Trans-Web Fusible Web, off-white in color, with product information visible on the core.

Setup and Preparation

Before applying the fusible web, ensure your fabric is clean and pre-shrunk if necessary. Gather the following items:

HTC 4000 Trans-Web Fusible Web
Fabric(s) to be fused
Iron (dry iron recommended)
Ironing board
Scissors or rotary cutter
Parchment paper or pressing cloth (optional, to protect iron and fabric)

Pre-heat your iron to the appropriate temperature for your fabric type. Avoid using steam during the fusing process unless specifically instructed by your fabric's care label or project requirements.

Operating Instructions: Application

Follow these steps for optimal application of the HTC 4000 Trans-Web Fusible Web:

Cut the Web: Cut a piece of Trans-Web slightly larger than the fabric piece you intend to make iron-on.
Attach to Fabric: Place the Trans-Web, paper side up, onto the wrong side of the fabric. Ensure the adhesive side of the web is in contact with the fabric.
Fuse to Fabric: Using a dry iron set to the appropriate temperature for your fabric, press firmly over the paper backing for approximately 5-10 seconds. Apply even pressure. The heat will activate the adhesive, bonding it to the fabric.
Cool and Peel: Allow the fabric and web to cool completely. Once cool, carefully peel away the release paper from the fabric. The adhesive should now be permanently bonded to the wrong side of your fabric, making it an iron-on piece.
Position and Fuse: Position your newly prepared iron-on fabric piece onto your project fabric. Place a pressing cloth or parchment paper over the piece to protect your iron and project.
Final Adhesion: Press firmly with a dry iron for 10-15 seconds, or until the piece is securely bonded to the project fabric. Ensure all edges are adhered.

Note: Always test on a scrap piece of fabric first to determine the ideal iron temperature and pressing time for your specific materials.

Care and Maintenance

Projects created with HTC 4000 Trans-Web Fusible Web are designed for durability and ease of care:

Washing: The fused fabric is machine washable. Use appropriate washing cycles and detergents for your fabric type.
Drying: The fused fabric is dry cleanable. It also withstands multiple machine washings without compromising the adhesive bond.
Storage: Store unused Trans-Web in a cool, dry place away from direct sunlight to maintain its adhesive properties.

Troubleshooting

Problem	Possible Cause	Solution
Fusible web peels off after ironing.	Insufficient heat or pressure during application; iron temperature too low for fabric type; not enough pressing time.	Ensure iron is set to the correct temperature for your fabric. Apply firm, even pressure across the entire surface during ironing. Increase pressing time slightly, testing on a scrap piece first. Allow the fused piece to cool completely before handling or attempting to peel.
Adhesive does not transfer evenly.	Uneven heat distribution; iron not fully pre-heated.	Allow iron to fully pre-heat before use. Move the iron slowly and evenly over the entire surface.

Specifications

Model: 4000
Brand: HTC
Material: 100% Polyimide Web
Color: Off-White
Dimensions: 16 inches (width) x 35 yards (length)
Package Dimensions: Approximately 8.58 x 1.85 x 19.25 inches
Item Weight: 0.8 ounces
Adhesive Type: Heat-activated fusible
Care: Machine washable and dry cleanable
Country of Origin: United States
UPC: 759191400075

Warranty and Support

For specific warranty information or product support, please contact HTC directly through their official website or customer service channels. Keep your purchase receipt as proof of purchase.

	FCC Test Report for HTC Wireless Earphones 35 (Model: HTC NE35) This document is an FCC test report for the HTC Wireless Earphones 35, model HTC NE35, detailing compliance with FCC Part 15 regulations. It includes test summaries, conducted and radiated emissions, peak output power, bandwidth, and other relevant test data.
	Hydration Reminder Talking Coaster with Voice Clock User Manual Comprehensive user guide for the HTC Hydration Reminder Talking Coaster with Voice Clock, covering setup, button functions, hydration tracking, customization, alarms, timers, and troubleshooting.
	HTC True Wireless Earbuds 1 (Model HTC TWS2) - Quick Start Guide Quick start guide for HTC True Wireless Earbuds 1 (Model HTC TWS2), covering setup, pairing, troubleshooting, controls, specifications, and authenticity verification.
	HTC True Wireless Earbuds 6 Quick Start Guide Get started with your HTC True Wireless Earbuds 6 (Model: TWS6). This guide covers setup, pairing, controls, technical specifications, and authenticity verification for HTC's wireless earbuds.
	HTC One (M8) Handbuch Umfassendes Handbuch für das HTC One (M8), das Anleitungen zur Einrichtung, Bedienung, Kamerafunktionen, Apps und Einstellungen bietet.
	HTC True Wireless Earbuds 1+ Quick Start Guide \| HTC TWS4 Get started quickly with your HTC True Wireless Earbuds 1+ (Model HTC TWS4). This guide covers unboxing, pairing, controls, LED indicators, technical specifications, and authenticity checks.

HTC 4000