Nilfisk P 160.2-15 X-TRA Pressure Washer User Manual

1. Introduction

The Nilfisk P 160.2-15 X-TRA is a high-performance pressure washer designed for demanding cleaning tasks around the home and garden. This robust unit features high-quality brass cylinder heads and reliable aluminum pumps, ensuring durability and consistent performance for regular use. Its powerful motor and efficient design make it ideal for cleaning vehicles, patios, garden furniture, and other outdoor surfaces.

Image 1.1: The Nilfisk P 160.2-15 X-TRA Pressure Washer, showcasing its integrated hose reel, detergent tank, and large wheels for mobility.

2. Safety Information

Please read and understand all safety warnings and instructions before operating this pressure washer. Failure to follow these instructions may result in electric shock, fire, and/or serious injury.

• Personal Protective Equipment: Always wear appropriate eye protection, hearing protection, and protective clothing when operating the pressure washer.
• Electrical Safety: Ensure the power supply matches the voltage specified on the product label. Do not operate the pressure washer with a damaged cord or plug. Always connect to a grounded outlet.
• Water Connection: Connect the pressure washer to a cold water supply only. Do not use hot water. Ensure the water supply hose is free from kinks and damage.
• High Pressure Hazard: The high-pressure jet can be dangerous if misused. Never direct the water jet at people, pets, electrical equipment, or the unit itself.
• Stability: Operate the pressure washer on a stable, level surface to prevent tipping.
• Chemicals: Use only detergents specifically designed for pressure washers. Follow detergent manufacturer's instructions for use and disposal.
• Children and Bystanders: Keep children and bystanders away from the operating area.
• Maintenance: Disconnect the power plug from the outlet before performing any maintenance or cleaning.

3. Product Features

The Nilfisk P 160.2-15 X-TRA is equipped with several features designed for user convenience and effective cleaning:

• Durable Pump System: Features an aluminum pump with a brass cylinder head for enhanced reliability and longevity.
• Automatic Start/Stop: The motor automatically starts when the trigger is pulled and stops when released, saving energy and extending motor life.
• High Mobility: Equipped with large wheels and an aluminum telescopic handle for easy transport across various terrains.
• Integrated Detergent System: An adjustable detergent system with an extra-long suction hose allows for easy application of cleaning agents.
• Steel-Reinforced Hose: A 15-meter steel-reinforced high-pressure hose provides extended reach and durability.
• Accessory Storage: Convenient storage options for accessories directly on the unit.
• Hose Reel: Integrated hose reel for neat and easy storage of the high-pressure hose.

4. Package Contents

The following items are included with your Nilfisk P 160.2-15 X-TRA pressure washer:

• High-pressure gun with quick coupling and swivel joint
• Spray lance
• Powerspeed nozzle
• Tornado nozzle
• 2-liter detergent tank
• Cable hook
• Transport trolley with large wheels (pre-assembled)
• Hose reel (pre-assembled)

5. Setup

Follow these steps for the initial setup of your pressure washer:

1. Unpacking: Carefully remove all components from the packaging. Check for any damage during transit.
2. Handle Assembly: Attach the aluminum telescopic handle if it is not already extended. Ensure it clicks securely into place.
3. High-Pressure Hose Connection: Connect the 15-meter high-pressure hose to the outlet on the pressure washer and to the high-pressure gun. Ensure connections are tight to prevent leaks.
4. Water Supply Connection: Connect a garden hose (not included) to the water inlet of the pressure washer. Ensure the garden hose is at least 1/2 inch in diameter. Connect the other end of the garden hose to a cold water tap. Nilfisk recommends using a backflow prevention valve (not included) for water supply connections.
5. Electrical Connection: Unwind the 5-meter power cord completely. Plug the power cord into a grounded electrical outlet. Ensure the outlet provides the correct voltage (230 Volts).
6. Detergent Tank (Optional): If using detergent, fill the 2-liter detergent tank with a suitable pressure washer detergent. Connect the detergent suction hose to the designated inlet.

6. Operating Instructions

Before starting, ensure all connections are secure and the water supply is turned on. Purge air from the system by holding the trigger on the gun until a steady stream of water emerges.

6.1 Starting the Pressure Washer

1. Turn on the water supply to the pressure washer.
2. Press the ON/OFF switch to the 'ON' position. The motor will start briefly and then stop, indicating it's ready.
3. Squeeze the trigger on the high-pressure gun to begin spraying. The motor will automatically start.

6.2 Using Nozzles

The pressure washer comes with a Powerspeed nozzle and a Tornado nozzle. Select the appropriate nozzle for your cleaning task:

• Powerspeed Nozzle: Provides a concentrated, rotating jet for stubborn dirt and heavy-duty cleaning on hard surfaces like concrete.
• Tornado Nozzle: Offers an adjustable fan spray for general cleaning tasks, suitable for various surfaces. Adjust the spray pattern by rotating the nozzle head.

6.3 Applying Detergent

To apply detergent:

1. Ensure the detergent tank is filled with appropriate pressure washer detergent.
2. Attach the detergent suction hose to the designated inlet on the pressure washer.
3. Select the low-pressure setting on your spray lance (if applicable) or use the dedicated detergent nozzle.
4. The pressure washer will draw detergent from the tank and mix it with the water. Adjust the detergent flow using the integrated control.
5. Apply detergent to the surface, allowing it to soak for a few minutes (refer to detergent instructions), then rinse with high-pressure water.

6.4 Shutting Down

1. Release the trigger on the high-pressure gun.
2. Press the ON/OFF switch to the 'OFF' position.
3. Turn off the water supply.
4. Squeeze the trigger on the gun to release any remaining pressure in the system.
5. Disconnect the power plug from the outlet.
6. Disconnect the water supply hose and high-pressure hose.

7. Maintenance

Regular maintenance ensures optimal performance and extends the life of your pressure washer.

• Cleaning Nozzles: Periodically clean the nozzles to remove any blockages. A clogged nozzle can cause the pump pressure to fluctuate.
• Water Inlet Filter: Check and clean the water inlet filter regularly to prevent debris from entering the pump.
• Hose and Connections: Inspect the high-pressure hose, gun, and connections for wear, damage, or leaks before each use. Replace damaged parts immediately.
• Storage: Before storing for extended periods, especially in freezing temperatures, ensure all water is drained from the pump and hoses to prevent damage. Store the unit in a dry, frost-free environment.
• Detergent System: After using detergent, run clean water through the detergent system to flush out any residue.

8. Troubleshooting

This section addresses common issues you might encounter with your pressure washer.

If you encounter a problem not listed here or if the suggested solutions do not resolve the issue, please contact Nilfisk customer support.

9. Technical Specifications

Detailed specifications for the Nilfisk P 160.2-15 X-TRA pressure washer:

10. Warranty Information

Nilfisk products are manufactured to high-quality standards and are covered by a manufacturer's warranty. The specific terms and duration of the warranty may vary by region and retailer. Please retain your proof of purchase for warranty claims.

For detailed warranty information, please refer to the warranty card included with your product or visit the official Nilfisk website. You may also contact your retailer for specific warranty terms applicable to your purchase.

11. Customer Support

Should you require assistance with your Nilfisk P 160.2-15 X-TRA pressure washer, including technical support, spare parts, or service, please contact Nilfisk customer service or an authorized service center.

You can find contact information and support resources on the official Nilfisk website: www.nilfisk.com

When contacting support, please have your product model number (128470133) and serial number (if applicable) ready.