Aqua Mix AquaShield Cleaner & Resealer Instruction Manual

Product Overview

Aqua Mix AquaShield Cleaner & Resealer is a versatile cleaning solution designed for use on sealed stone, grout, tile, and other penetrating sealed surfaces. This non-acidic formula not only cleans but also adds a layer of sealer with every application, helping to maintain the integrity and appearance of your surfaces. It effectively cuts through grease and dirt, providing a thorough clean. Formulated with no VOCs (Volatile Organic Compounds), it contributes to better indoor and outdoor air quality.

Image: Aqua Mix AquaShield Cleaner & Resealer in a 24 fl oz spray bottle.

Key Features:

• Non-acidic formula for safe use on various surfaces.
• Integrates a sealer with every cleaning, providing ongoing protection.
• Suitable for everyday use on stone, tile, and grout.
• Contains no VOCs, promoting better air quality.
• Effectively removes grease and dirt.

Setup and Preparation

Before applying Aqua Mix AquaShield Cleaner & Resealer, ensure the surface is free of loose debris, dust, and dirt. For best results and to confirm compatibility, always test the product in an inconspicuous area prior to full application.

Surface Compatibility:

• Sealed Natural Stone (e.g., granite, marble, slate)
• Grout lines (sealed)
• Ceramic and Porcelain Tile (sealed)
• Any surface previously treated with a penetrating sealer

Operating Instructions

General Cleaning Procedure:

1. Shake Well: Shake the Aqua Mix AquaShield Cleaner & Resealer bottle thoroughly before each use to ensure proper mixing of ingredients.
2. Apply: Spray the cleaner directly onto the surface you wish to clean. Ensure even coverage.
3. Dwell Time: Allow the product to dwell on the surface for 3 to 5 minutes. This allows the cleaning agents to work and the sealer to penetrate.
4. Wipe Clean: Using a clean, damp cloth or sponge, wipe the surface clean. For heavily soiled areas, gently agitate the surface with a soft brush before wiping.
5. Rinse Cloth: Rinse your cloth or sponge frequently to prevent redepositing dirt onto the cleaned surface.
6. No Rinsing Required: There is no need to rinse the treated surface with water after wiping.

Important Notes:

• Do not mix Aqua Mix AquaShield Cleaner & Resealer with other cleaning products or chemicals.
• Ensure the area is well-ventilated during and after use.
• Always follow safety precautions listed on the product label.

Maintenance and Storage

Regular use of Aqua Mix AquaShield Cleaner & Resealer is recommended to maintain the cleanliness and protective sealing of your surfaces. Its unique formula helps to extend the life of your sealed stone, tile, and grout.

Storage Guidelines:

• Store the product in a cool, dry place, away from direct sunlight and extreme temperatures.
• Keep the container tightly closed when not in use to prevent evaporation and contamination.
• Protect from freezing. Freezing may affect product performance.
• Keep out of reach of children and pets.

Troubleshooting

Issue: Product does not clean effectively.

Possible Cause: The surface may be excessively dirty, or the product was not allowed sufficient dwell time.

Solution: Ensure the surface is pre-cleaned of any loose debris. Allow the product to dwell for the recommended 3-5 minutes. For stubborn stains or heavy buildup, agitate the area with a soft brush and repeat the application if necessary.

Issue: Streaking or residue is left on the surface after cleaning.

Possible Cause: Too much product may have been applied, or the cloth/sponge used for wiping was dirty or oversaturated.

Solution: Use a clean, damp cloth or sponge to wipe the surface. Ensure that all excess product is removed. Rinse the cloth frequently during the cleaning process to avoid redepositing residue.

Product Specifications

Warranty Information

Specific warranty details for Aqua Mix AquaShield Cleaner & Resealer are not provided in the available product information. For any applicable warranty terms and conditions, please refer to the product packaging or the official Aqua Mix / Custom Building Products website.

Customer Support

For further assistance, technical support, or inquiries regarding Aqua Mix AquaShield Cleaner & Resealer, please contact the manufacturer directly.

Manufacturer: Custom Building Products

Website: www.custombuildingproducts.com (Please verify the official website for the most current information.)