1. Product Overview
The LPS 1 Premium Greaseless Lubricant is a versatile, multi-purpose solution designed to displace moisture, dry fast, and resist oil, dust, and dirt build-up. It is ideal for delicate mechanisms and effective in loosening rusted or frozen parts. This product is formulated to provide a thin, non-staining film that protects against corrosion and provides light lubrication without attracting contaminants.
Image 1.1: A 1-gallon bottle of LPS 1 Premium Greaseless Lubricant, showcasing its packaging and branding.
2. Important Safety Instructions
Always adhere to the following safety guidelines when handling LPS 1 Premium Greaseless Lubricant to ensure safe use and prevent injury or damage.
- Keep out of reach of children and pets. This product is for industrial and professional use only.
- Use in a well-ventilated area. Avoid breathing vapors or mists. If ventilation is inadequate, use appropriate respiratory protection.
- Avoid contact with skin and eyes. Wear protective gloves and eye protection (safety glasses or goggles) when handling. In case of contact, flush thoroughly with water.
- Do not ingest. If swallowed, do not induce vomiting. Seek immediate medical attention.
- Flammable liquid and vapor. Keep away from heat, hot surfaces, sparks, open flames, and other ignition sources. No smoking.
- Store in a cool, dry place. Keep container tightly closed when not in use. Store away from incompatible materials.
- Dispose of contents/container in accordance with local, regional, national, and international regulations.
3. Setup and Preparation
Before applying the lubricant, ensure proper preparation of the product and the application surface.
- Read Safety Data Sheet (SDS): Familiarize yourself with the product's SDS for detailed safety and handling information.
- Prepare the Area: Ensure the application area is well-ventilated and free from ignition sources. Lay down protective coverings if necessary to prevent spills.
- Clean Surface: For optimal performance, ensure the surface to be treated is clean, dry, and free of loose dirt, grease, or rust.
- Shake Well: Shake the 1-gallon bottle thoroughly before each use to ensure the product is uniformly mixed.
4. Operating Instructions (Application)
LPS 1 Premium Greaseless Lubricant can be applied in various ways depending on the specific need. Always apply a thin, even coat.
General Application
- Pour a small amount into an appropriate applicator (e.g., spray bottle, brush, or dip tank).
- Apply a light, even film to the desired surface. Avoid over-application.
- Allow the product to dry. It dries fast, leaving a non-greasy film.
Specific Applications
- Moisture Displacement: Apply directly to wet components. The lubricant will penetrate and displace water, preventing corrosion.
- Rust Prevention: Apply a thin film to metal surfaces to create a protective barrier against rust and corrosion. Reapply periodically as needed.
- Lubricating Delicate Mechanisms: For light lubrication of precision parts, electronics, or fine instruments, apply a minimal amount to moving components. Its greaseless nature prevents dust attraction.
- Loosening Rusted or Frozen Parts: Apply generously to the affected area and allow time for the lubricant to penetrate. Reapply if necessary and gently attempt to loosen the part.
5. Maintenance and Storage
Proper storage and handling ensure the longevity and effectiveness of your LPS 1 lubricant.
- Storage: Store the 1-gallon bottle in its original container, tightly closed, in a cool, dry, well-ventilated area. Keep away from direct sunlight, heat sources, and incompatible materials.
- Container Integrity: Ensure the cap is securely fastened after each use to prevent evaporation and contamination.
- Spill Cleanup: In case of a spill, absorb with an inert material (e.g., sand, vermiculite, diatomaceous earth) and place in an appropriate waste disposal container. Clean the affected area thoroughly.
6. Troubleshooting
If you encounter issues while using LPS 1 Premium Greaseless Lubricant, refer to the following table for common problems and solutions.
| Issue | Possible Cause | Solution |
|---|---|---|
| Lubricant not effective in loosening rusted parts. | Insufficient penetration time; heavy rust buildup; improper application. | Apply more generously and allow longer penetration time (e.g., several hours or overnight). Reapply if necessary. Ensure surface is clean. |
| Product not drying fast or leaving a residue. | Over-application; poor ventilation; low ambient temperature. | Apply a thinner coat. Ensure adequate ventilation in the application area. Allow more drying time in cooler conditions. |
| Corrosion still occurring after application. | Incomplete surface coverage; surface not properly cleaned before application; product film compromised. | Ensure complete and even coverage. Thoroughly clean and dry the surface before applying. Reapply if the protective film has been removed or damaged. |
7. Product Specifications
Key technical specifications for the LPS 1 Premium Greaseless Lubricant (Model 428-01128).
| Specification | Detail |
|---|---|
| Brand | LPS |
| Model Number | 428-01128 |
| Material | Mineral-based |
| Item Form | Oil |
| Package Information | Bottle |
| Container Type | Bottle |
| Liquid Volume | 1 Gallon (3.78 Liters) |
| Unit Count | 512.0 Fluid Ounces |
| Item Weight | 22 Pounds (approximate for 1 gallon) |
| Recommended Uses | Lubricant |
| Specific Uses | Prevent Corrosion, Displace Moisture, Loosen Rusted Parts, Lubricate Delicate Mechanisms |
| Manufacturer | LPS |
| UPC | 078827011288 |
| ASIN | B004H31AWI |
8. Warranty Information and Customer Support
For specific warranty details regarding the LPS 1 Premium Greaseless Lubricant, please refer to the documentation provided at the time of purchase or contact the manufacturer directly. Warranty terms typically cover defects in materials and workmanship under normal use.
For technical assistance, product inquiries, or to report any issues, please contact LPS customer support through their official website or the retailer from whom the product was purchased. Always have your product model number (428-01128) and purchase information available when contacting support.
You can find more information and contact details on the official LPS website: www.lpslabs.com