Important Safety Information
Read all instructions before using this appliance. Failure to follow these instructions may result in electric shock, fire, or serious injury.
- Always ground the appliance.
- Do not operate with a damaged cord or plug.
- Keep children away from the hot water dispenser.
- Ensure proper ventilation around the unit.
- Disconnect power before cleaning or servicing.
- WARNING: Cancer and Birth Defect/Reproductive Harm -- www.P65Warnings.ca.gov/product
Product Overview
The Oasis Atlantis POUD1SHS is a bottleless hot and cold water cooler designed for direct connection to your water line. It provides instant access to both chilled and heated water.
Front view of the Oasis Atlantis POUD1SHS water cooler, showing the hot (red) and cold (blue) water spigots and drip tray.
- Model: POUD1SHS
- Color: White
- Installation Type: Plumbed
- Water Temperatures: Hot and Cold
- Dimensions: 30"D x 8"W x 6"H
Setup and Installation
This bottleless water cooler requires direct connection to a potable water supply line. Professional installation is recommended.
- Unpacking: Carefully remove the unit from its packaging. Inspect for any shipping damage.
- Placement: Position the cooler on a level surface, away from direct sunlight and heat sources. Ensure adequate clearance for ventilation (at least 4 inches from walls).
- Water Line Connection:
- Turn off the main water supply.
- Connect the water cooler's inlet to a cold water supply line using appropriate plumbing fittings (not included).
- Ensure all connections are secure and leak-free.
- It is recommended to install an inline water filter (not included) for optimal water quality and to protect the unit.
- Power Connection: Plug the power cord into a grounded electrical outlet.
- Initial Flush: Before first use, dispense several cups of both cold and hot water to flush the system and remove any air or manufacturing residues.
Side view of the Oasis Atlantis POUD1SHS water cooler, illustrating its dimensions of 38 inches in height and 12 inches in width.
Operating Instructions
The Oasis Atlantis POUD1SHS water cooler is designed for simple operation.
- Cold Water Dispensing: Place a cup under the blue spigot. Press the blue lever to dispense cold water. Release the lever to stop the flow.
- Hot Water Dispensing: Place a heat-resistant cup under the red spigot. This unit features a safety mechanism for hot water. Press the red safety button and then press the red lever simultaneously to dispense hot water. Release both to stop the flow.
- Temperature Control: The unit automatically maintains optimal hot and cold water temperatures. There are no user-adjustable temperature settings.
Maintenance
Regular maintenance ensures optimal performance and longevity of your water cooler.
- Drip Tray: The removable drip tray should be emptied and cleaned regularly. It is dishwasher safe.
- Exterior Cleaning: Wipe the exterior surfaces with a soft, damp cloth. Do not use abrasive cleaners or solvents.
- Water Line Filter (if installed): Follow the manufacturer's instructions for replacing your inline water filter.
- Descaling (Hot Tank): If you notice reduced hot water flow or unusual noises, the hot water tank may require descaling. Consult a qualified technician for this procedure.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| No water dispensed | Water supply turned off; clogged filter; airlock in line. | Check water supply valve; replace filter; flush system. |
| Water not hot/cold enough | Unit not plugged in; power switch off; thermostat issue. | Ensure unit is plugged in and power switch is on; allow time for heating/cooling; contact service if problem persists. |
| Water leakage | Loose water line connection; damaged internal component. | Check all water line connections for tightness; disconnect power and water supply, then contact service. |
| Unusual noise | Air in system; compressor cycling; loose parts. | Dispense water to remove air; normal compressor operation; contact service if noise is excessive or persistent. |
Specifications
- Brand: Oasis
- Model Number: POUD1SHS WHI
- Color: White
- Material: Polyethylene (PE)
- Product Dimensions (D x W x H): 30" x 8" x 6"
- Item Weight: 32 Pounds
- Installation Type: Plumbed
- Access Location: Bottom
- Number of Settings: 2 (Hot, Cold)
- Upper Temperature Rating (Hot): 190 Degrees Fahrenheit
- Power Source: Corded Electric
- Manufacturer: Oasis Coolers
- UPC: 092026160189, 092026169939
Warranty and Support
This product comes with a manufacturer's warranty. For specific details regarding coverage and duration, please refer to the warranty card included with your purchase or visit the official Oasis website.
For technical support, troubleshooting assistance, or to inquire about replacement parts, please contact Oasis customer service:
- Manufacturer Warranty Description: 3 year.
- Online Support: Visit the Oasis Water Coolers Support Page (example link, actual link may vary).
- Contact Information: Refer to your product packaging or the Oasis website for current contact details.