Bandai Spirits Going Merry Model Ship (Model 165509) Instruction Manual

Introduction

This instruction manual provides detailed guidance for the assembly and care of your Bandai Spirits Going Merry Model Ship, Model 165509. This kit is designed for snap-together assembly, requiring no glue, and features pre-colored plastic components, eliminating the need for painting the main parts.

The model faithfully reproduces the Going Merry from "One Piece," featuring intricate details such as wood grain, knotted ropes, and molded wrinkles in the sails. It includes small parts essential for a pirate ship, such as a cannon, anchor, and barrels, along with unpainted figures of the Straw Hat pirates.

Package Contents

Before beginning assembly, please verify that all components are present in the package:

• Runner x 11 (plastic parts frames)
• Water slide decal x 1
• Marking sticker x 1
• Foil sticker x 1
• Nylon cord x 1
• Instruction manual (Japanese language with visual guides)

If any parts are missing or damaged, please contact customer support.

Setup and Assembly

Follow these steps for the proper assembly of your Going Merry model ship. Refer to the included instruction manual for detailed diagrams.

1. Preparation

• Carefully remove all parts from the runners using a hobby nipper or craft knife. Ensure clean cuts to avoid damaging the parts.
• Organize parts by runner letter and number as indicated in the manual.
• Review the entire instruction manual before starting to familiarize yourself with the assembly sequence. The manual is primarily visual, making it accessible despite being in Japanese.

2. Hull Assembly

Begin by assembling the main hull sections. The parts are designed to snap together securely without the need for adhesive.

Image: Fully assembled Going Merry model ship.

Image: Another view of the assembled Going Merry model.

Image: Rear-side view of the assembled Going Merry model.

3. Deck and Mast Installation

Attach the deck sections and then proceed with the mast and rigging. The nylon cord is used for the ship's rigging.

Image: Digital render illustrating the ship's structure.

Image: Digital render illustrating the ship's structure from the rear.

Image: Detail of the ship's deck, including trees and cabin.

Image: Detail of the rope ladder.

Image: Detail of the mast.

4. Sail and Figure Placement

Attach the sails and place the included figures. The sails feature molded wrinkles for a realistic appearance.

Image: Detail of the sail texture.

Image: The Jolly Roger flag design.

Image: Unpainted figures of Luffy, Sanji, and Zoro. These figures require painting for full detail.

Image: Unpainted figures of Nami, Chopper, and Usopp. These figures require painting for full detail.

5. Accessory Details

Add the various accessories such as the cannon, anchor, barrels, and crates to complete the model. The anchor's position can be adjusted after assembly.

Image: Cannon accessory.

Image: Anchor mechanism. The anchor's position can be changed.

Image: Barrel accessory.

Image: Crate accessory.

Image: Another barrel accessory.

Operating and Display

Once assembled, your Bandai Spirits Going Merry model ship is ready for display. The model comes with a display stand for stable placement.

• Display Location: Choose a stable, flat surface away from direct sunlight and extreme temperatures to prevent material degradation.
• Anchor Position: The anchor can be adjusted to an up or down position as desired.
• Figures: The included Straw Hat pirate figures are unpainted. For a more detailed appearance, painting them is recommended.

Maintenance

Proper maintenance will help preserve the appearance of your model ship.

• Dusting: Regularly dust the model with a soft brush or compressed air to prevent dust buildup in crevices.
• Cleaning: For stubborn dirt, gently wipe with a slightly damp cloth. Avoid harsh chemicals or abrasive cleaners, as these can damage the plastic and painted surfaces.
• Storage: If storing the model, place it in a protective container to prevent dust and physical damage.

Troubleshooting

This section addresses common issues you might encounter during assembly or with the finished model.

• Parts Not Fitting: Ensure you are using the correct parts as indicated in the instruction manual's diagrams. Check for any excess plastic (nubs) from the runners that might be obstructing the fit. Carefully trim any excess material.
• Loose Connections: While designed for snap-fit, some connections might be looser than others. A small amount of plastic cement (sold separately) can be used for a more permanent bond if desired, but it is not required for basic assembly.
• Decal Application Issues: If water slide decals are difficult to apply or adhere, ensure the surface is clean and use a decal setting solution for better results.
• Missing or Damaged Parts: If you discover any missing or significantly damaged parts upon opening the kit, please contact the retailer or Bandai Spirits customer support with your proof of purchase.

Specifications

Support and Contact

For further assistance, inquiries about parts, or general support, please refer to the following:

• Manufacturer: BANDAI SPIRITS / Bluefin Distribution Toys
• Online Resources: Visit the official BANDAI SPIRITS website for product updates and additional information.
• Retailer Support: For issues related to purchase or delivery, contact the retailer where the product was acquired.

Please retain your proof of purchase for any support inquiries.