Orbit 400-Series Professional Pop-Up Sprinkler Spray Head

Product Overview

The Orbit 400-Series Professional Pop-Up Sprinkler Spray Head (Model 54184L) is designed for efficient and reliable lawn watering. Featuring a 2-inch pop-up height and a plastic nozzle with a side strip pattern, this sprinkler is ideal for smaller lawn areas, providing a radius of 8 to 12 feet. Constructed from UV-resistant plastic, it ensures durability and years of dependable use in outdoor cold water applications.

Image: Orbit 400-Series Professional Pop-Up Sprinkler Spray Head with its pop-up mechanism extended, showing the green nozzle cap.

Installation and Setup

Proper installation ensures optimal performance of your sprinkler head. Follow these steps for a successful setup:

1. Prepare the Area: Dig a trench for the sprinkler piping, ensuring it is deep enough to bury the pipe and sprinkler head below ground level when retracted.
2. Connect to Main Line: Attach the sprinkler head to the irrigation piping using appropriate fittings. Ensure all connections are secure and watertight.
3. Position the Sprinkler: Place the sprinkler head in the desired location. The top of the sprinkler head should be flush with the ground surface when installed.
4. Backfill: Carefully backfill the trench with soil, ensuring the sprinkler head remains upright and level. Avoid getting dirt inside the sprinkler mechanism.
5. Test System: Turn on the water supply to the irrigation system and check for leaks around the sprinkler head. Observe the spray pattern to ensure proper coverage.

Operation

The Orbit 400-Series Pop-Up Sprinkler operates automatically as part of your irrigation system. It is designed for use with cold water only.

• Automatic Pop-Up: When water pressure is applied to the irrigation line, the sprinkler head will automatically pop up to its full 2-inch height.
• Spray Pattern: The integrated plastic nozzle provides a fixed side strip spray pattern, designed for efficient coverage of rectangular or narrow lawn areas.
• Retraction: Once the water supply is turned off, the sprinkler head will retract back into the ground, remaining out of sight and protected from lawn equipment.

Maintenance

Regular maintenance helps prolong the life and efficiency of your sprinkler heads.

• Clean Nozzle: Periodically inspect the nozzle for debris (e.g., dirt, grass clippings) that may obstruct the spray. Gently clean the nozzle opening if necessary.
• Check for Leaks: During operation, observe the area around the sprinkler head for any signs of leaks. Address leaks promptly to conserve water and prevent damage.
• Winterization: In colder climates, ensure your irrigation system, including sprinkler heads, is properly winterized before freezing temperatures arrive to prevent damage from expanding ice.
• Inspect for Damage: Regularly check the sprinkler head for any physical damage to the casing or pop-up mechanism. Replace damaged units as needed.

Troubleshooting

Here are some common issues and their potential solutions:

Technical Specifications

Warranty and Support

For specific warranty information and customer support, please refer to the official Orbit website or contact their customer service directly. Keep your purchase receipt as proof of purchase for any warranty claims.

Online Resources: Visit the official Orbit website for product manuals, FAQs, and additional support resources.

Customer Service: Contact Orbit customer service for technical assistance or warranty inquiries. Contact details can typically be found on the product packaging or the official website.