Kerbl Pet Fixing Kit for Outdoor Enclosures

Introduction

This instruction manual provides detailed guidance for the assembly, use, and maintenance of your Kerbl Pet Fixing Kit. This kit is designed to extend existing Kerbl outdoor pet enclosures, specifically models 70341 and 70358, providing additional space and security for small animals.

Components List

The Kerbl Pet Fixing Kit includes the following components, depending on the enclosure model it is intended to extend:

• For Enclosure Model 70341: 6 extension elements, 24 connectors, and 6 U-hooks.
• For Enclosure Model 70358: 2 extension elements, 8 connectors, and 2 U-hooks.

Please verify that all components are present before beginning assembly.

Setup Instructions

Follow these steps to properly assemble and attach your Kerbl Pet Fixing Kit to your existing enclosure.

1. Identify Components: Separate the extension elements, connectors, and U-hooks. Ensure you have the correct number of parts for your specific enclosure model (70341 or 70358).
2. Position Extension Elements: Place the extension elements in the desired configuration around your existing Kerbl enclosure. The elements are designed to seamlessly integrate with the main enclosure panels.
3. Attach Connectors: Use the provided connectors to securely join the new extension elements to each other and to the existing enclosure panels. The connectors typically slide over the vertical bars at the corners of the panels. Ensure a snug fit to prevent gaps.
4. Secure with U-Hooks: For added stability and to prevent animals from digging underneath, use the U-hooks. These hooks are designed to anchor the bottom edge of the enclosure panels to the ground. Push the U-hooks firmly into the ground through the bottom grid of the enclosure panels.

Operating Instructions

Once assembled, the extended enclosure provides a secure and spacious environment for your small animals. Ensure the enclosure is placed on a flat, stable surface. Regularly check all connections to confirm they remain secure.

Maintenance

To ensure the longevity and safety of your Kerbl Pet Fixing Kit and enclosure, follow these maintenance guidelines:

• Regular Cleaning: Clean the aluminum panels and connectors periodically with a damp cloth and mild soap. Rinse thoroughly and dry to prevent corrosion.
• Inspect Connections: Routinely check all connectors and U-hooks for tightness and security. Re-tighten or re-position as necessary.
• Check for Damage: Inspect the aluminum elements for any signs of damage, bending, or sharp edges that could harm your pet. Replace damaged parts if necessary.
• Seasonal Storage: If the enclosure is not used year-round, disassemble and store the components in a dry place to protect them from extreme weather conditions.

Troubleshooting

• Missing Components: If your kit arrives with missing connectors, U-hooks, or extension elements, please contact Kerbl Pet customer support immediately for assistance.
• Instability: Ensure all connectors are firmly attached and U-hooks are deeply inserted into the ground. If the ground is too soft, consider relocating the enclosure or adding additional anchors (not included).
• Difficulty Connecting Panels: Verify that you are using the correct connectors for the specific panel type. Ensure panels are aligned properly before attempting to connect them.

Specifications

Warranty and Support

For information regarding warranty coverage, product support, or to purchase replacement parts, please refer to the official Kerbl Pet website or contact your retailer. Keep your proof of purchase for warranty claims.