BANDAI HOBBY CENTER ORIGINAL INJECTION MACHINE

1. Introduction

Thank you for purchasing the BANDAI HOBBY CENTER ORIGINAL INJECTION MACHINE model kit. This kit is designed for an enjoyable and straightforward assembly experience, suitable for both beginners and experienced modelers. It features appealing color separation and a simple construction process, allowing for quick completion.

2. Package Contents

Please verify that all components are present before beginning assembly. The package should contain:

• One (1) plastic runner with all model parts
• One (1) sheet of marking stickers
• One (1) instruction manual (this document)

3. Assembly Instructions

Follow these steps to assemble your ORIGINAL INJECTION MACHINE model. No special tools are required, but a hobby knife or nippers may be helpful for detaching parts cleanly from the runner.

1. Step 1: Prepare Parts
   Carefully detach all plastic parts from the single runner. Use a hobby knife or nippers to ensure clean cuts and prevent stress marks. Smooth any rough edges with a hobby file or sandpaper if desired.
2. Step 2: Assemble Main Body
   Refer to the diagrams in the included printed instructions for the specific order of assembly. Typically, you will connect larger base components first, then attach the main machine body parts.
3. Step 3: Attach Details
   Connect smaller detail pieces, such as pipes, levers, and panels, according to the diagrams. Ensure all connections are secure.
4. Step 4: Apply Stickers
   Once the model is fully assembled, carefully apply the provided marking stickers to the designated areas. Use tweezers for precise placement.
5. Step 5: Final Check
   Review your assembled model to ensure all parts are correctly attached and stickers are applied as intended.

Figure 3.1: Fully assembled BANDAI HOBBY CENTER ORIGINAL INJECTION MACHINE. The model features a white main body with blue and yellow accents, grey machinery, and a dark grey base. Text "EC 160" is visible on the front.

4. Operating Instructions

This model is a static display piece. Once assembled, it is ready for display.

• Display: Place the model on a stable, flat surface away from direct sunlight and excessive heat to prevent material degradation.
• Handling: Handle the model carefully to avoid accidental detachment of parts. Avoid dropping or applying excessive force.

5. Maintenance

Proper maintenance will help preserve the appearance and integrity of your model.

• Cleaning: Dust the model regularly with a soft, dry brush or a microfiber cloth. For stubborn dirt, lightly dampen a cloth with water (no harsh chemicals) and gently wipe.
• Storage: If storing the model, place it in a protective container to prevent dust accumulation and damage.

6. Troubleshooting

Should you encounter any issues during or after assembly, refer to the following common solutions:

• Parts not fitting: Ensure you are using the correct parts as indicated in the diagrams. Check for any excess plastic (nubs) that may be preventing a flush fit and trim them carefully.
• Loose connections: If a part feels loose, gently press it firmly into place. For persistent looseness, a small amount of plastic model cement (sold separately) can be used, but apply sparingly.
• Missing parts or stickers: Double-check the runner and packaging. If a part is genuinely missing, contact BANDAI customer support.
• Stickers not adhering: Ensure the surface is clean and dry before applying stickers. Press firmly after placement.

7. Specifications

8. Warranty and Support

For specific warranty information or technical support regarding your BANDAI HOBBY CENTER ORIGINAL INJECTION MACHINE, please refer to the official BANDAI website or contact their customer service department. Keep your purchase receipt as proof of purchase.

You can often find support contact details on the manufacturer's official website: www.bandai.com