AudioQuest 3.5 mm Stereo to 2 x Female RCA Adapter (Piccolo) Instruction Manual

1. Introduction

This manual provides instructions for the proper use and care of your AudioQuest 3.5 mm Stereo to 2 x Female RCA Adapter. This adapter is designed to convert a 3.5 mm stereo output into two female RCA connections, allowing for versatile audio connectivity.

2. Safety Information

Please read and understand the following safety guidelines before using the adapter:

• Do not expose the adapter to extreme temperatures, moisture, or corrosive substances.
• Avoid dropping or subjecting the adapter to severe impact.
• Keep out of reach of children.
• Do not attempt to disassemble or modify the adapter. This will void any potential warranty and may cause damage.

3. Package Contents

Verify that all items are present:

• AudioQuest 3.5 mm Stereo to 2 x Female RCA Adapter (Piccolo)

Image: The AudioQuest 3.5 mm Stereo to 2 x Female RCA Adapter shown in its retail packaging. The adapter features a gold-plated 3.5mm male plug on one end and two female RCA jacks (red and white) on the other, encased in a black housing.

4. Setup and Connection

Follow these steps to connect your AudioQuest adapter:

1. Identify Ports: Locate the 3.5 mm stereo output jack on your source device (e.g., smartphone, laptop, music player) and the RCA input jacks (typically red for right audio, white for left audio) on your receiving device (e.g., amplifier, home theater system).
2. Connect to Source: Insert the 3.5 mm male plug of the AudioQuest adapter firmly into the 3.5 mm stereo output jack of your source device.
3. Connect RCA Cables: Plug your standard RCA audio cables (not included) into the two female RCA jacks on the adapter. Ensure the red RCA cable connects to the red jack on the adapter and the white/black RCA cable connects to the white jack on the adapter.
4. Connect to Receiving Device: Connect the other ends of your RCA cables to the corresponding RCA input jacks on your receiving audio device.

Once connected, ensure both your source and receiving devices are powered on and set to the correct input/output settings.

5. Operation

The AudioQuest 3.5 mm Stereo to 2 x Female RCA Adapter is a passive device and requires no additional power or configuration. Its operation is straightforward:

• Once properly connected as described in the "Setup and Connection" section, audio signals from your source device will be transmitted through the adapter to your receiving audio equipment.
• Control volume and playback directly from your source device or receiving audio equipment.

6. Maintenance and Care

To ensure the longevity and optimal performance of your adapter, follow these maintenance guidelines:

• Cleaning: Use a soft, dry cloth to gently wipe the adapter. Do not use liquid cleaners, solvents, or abrasive materials.
• Storage: Store the adapter in a cool, dry place away from direct sunlight and extreme temperatures when not in use.
• Handling: Always grasp the connector housing when plugging or unplugging the adapter. Avoid pulling on the cables connected to the RCA jacks.

7. Troubleshooting

If you encounter issues, refer to the following common problems and solutions:

8. Specifications

9. Warranty and Support

AudioQuest products are manufactured to high-quality standards. For specific warranty information and technical support, please refer to the official AudioQuest website or contact their customer service directly. Keep your purchase receipt as proof of purchase.

Note: Warranty terms may vary by region and retailer.