Inter Link 20900180

Inter Link Alpine Living Bed User Manual

Model: 20900180

Introduction

Welcome to the user manual for your Inter Link Alpine Living Bed. This functional double bed is designed with integrated storage, including drawers and open compartments, offering a practical and space-saving solution for your bedroom. Crafted from solid pine wood with a white lacquered finish, this bed combines durability with a modern aesthetic. This manual provides essential information for assembly, operation, maintenance, and troubleshooting to ensure long-lasting satisfaction with your product.

For further assistance, please refer to the support section.

Safety Instructions

Always follow assembly instructions carefully.
Ensure all screws and fasteners are securely tightened before use.
Do not exceed the recommended maximum weight of 200 kg.
Keep small parts away from children during assembly.
Use appropriate tools for assembly to prevent damage to the product or injury.

Setup and Assembly

The Inter Link Alpine Living Bed requires assembly. It typically arrives in multiple packages. While assembly is straightforward, it can be time-consuming and may require two people for optimal ease and safety.

Package Contents

Verify that all components listed in the assembly guide are present. The bed includes:

Bed frame components (solid pine wood, white lacquered)
Roll slatted base
4 small drawers
2 large drawers
8 open compartments
2 nightstands (integrated/movable)
All necessary hardware (screws, dowels, etc.)

Recommended Tools

Screwdriver (manual or power drill with appropriate bits)
Hammer (for dowels, if applicable)
Measuring tape (for verifying dimensions)

Assembly Steps

Unpack all components and lay them out on a clean, soft surface to prevent scratches.
Identify each part using the provided numbering or diagrams in the separate assembly manual.
Begin by assembling the main bed frame, connecting the side rails and end panels. Ensure all connections are firm.
Install the internal support structures for the drawers and open compartments.
Assemble the drawers and nightstands according to their specific instructions. Note that some nightstands may have wheels for easy movement.
Insert the assembled drawers and nightstands into their designated compartments within the bed frame.
Place the roll slatted base onto the bed frame supports. Ensure it is evenly distributed and secured if necessary.
Double-check all screws and fasteners to ensure they are fully tightened for stability and safety.

Assembled Inter Link Alpine Living Bed in a bedroom setting — Figure 1: Fully assembled Inter Link Alpine Living Bed with integrated storage and nightstand.

Dimensions of the Inter Link Alpine Living Bed — Figure 2: Key dimensions of the bed: 209 cm length, 186 cm width, and 48 cm height.

Operating and Usage

The Inter Link Alpine Living Bed is designed for daily use as a sleeping surface and a storage solution.

Storage Functionality

The bed features four small drawers and two large drawers, ideal for storing clothing, linens, or other personal items.
Eight open compartments provide easy access storage for books, decorative items, or frequently used essentials.
The two integrated nightstands can be positioned as desired, offering convenient bedside surfaces. Some nightstands may be on wheels for mobility.

Close-up of the bed's integrated drawers and open compartments — Figure 3: Detailed view of the bed's storage features, including drawers and open shelves.

Another view of the bed's storage compartments — Figure 4: The bed's design provides ample storage space beneath the sleeping surface.

Close-up of a movable nightstand with drawers — Figure 5: The movable nightstand with two drawers, designed to complement the bed's storage.

Close-up of a drawer and open shelf within the bed frame — Figure 6: Detail of a small drawer and an open compartment, showcasing the integrated storage design.

Maintenance and Care

To ensure the longevity and appearance of your Inter Link Alpine Living Bed, follow these maintenance guidelines:

Cleaning: Wipe surfaces with a soft, damp cloth. Avoid abrasive cleaners or harsh chemicals, as they can damage the white lacquered finish.
Dusting: Regularly dust the bed frame and storage compartments with a dry, soft cloth.
Tightening Fasteners: Periodically check all screws and fasteners and tighten them if necessary. Loose connections can affect the bed's stability and durability.
Wood Care: As the bed is made from solid pine wood, avoid placing it in direct sunlight or near heat sources to prevent warping or cracking. Maintain a stable room temperature and humidity.
Drawer Operation: Ensure drawers slide smoothly. If they become stiff, check for obstructions or apply a small amount of silicone spray to the runners (if applicable and recommended by the manufacturer).

Close-up of the wooden slatted base of the bed — Figure 7: The wooden slatted base provides support for the mattress and requires occasional inspection for wear.

Close-up of a bed corner showing the white lacquered finish and screw details — Figure 8: Detail of the bed's corner construction, highlighting the white lacquered finish and secure fastenings.

Troubleshooting

This section addresses common issues you might encounter with your Inter Link Alpine Living Bed.

Common Issues and Solutions
Problem	Possible Cause	Solution
Bed feels wobbly or unstable	Loose fasteners or incorrect assembly.	Check all screws and bolts and tighten them securely. Refer to the assembly manual to ensure all parts are correctly installed.
Drawers are difficult to open or close	Obstruction in the drawer runners, misaligned drawers, or dirty runners.	Remove the drawer and check for any objects blocking the runners. Clean the runners. Ensure the drawer is properly aligned on its tracks.
Squeaking noises from the bed	Loose connections, friction between wood parts, or issues with the slatted base.	Tighten all fasteners. Apply a small amount of furniture wax or silicone spray to points of friction. Inspect the slatted base for any broken or misaligned slats.
Damage to the wood finish	Impact, scratches, or exposure to harsh chemicals.	For minor scratches, touch-up paint matching the white lacquer may be used. For significant damage, contact customer support.

Specifications

Feature	Detail
Brand	Inter Link
Model Number	20900180
Product Dimensions (L x W x H)	209 cm x 186 cm x 48 cm
Weight	100 kg
Recommended Mattress Size	180 x 200 cm
Material	Solid Pine Wood
Color	White
Finish Type	Lacquered
Special Features	Integrated Storage, Drawers, Open Compartments, Movable Nightstands, Durable, Ecological Plantation Wood
Recommended Maximum Weight	200 Kilograms

Warranty Information

Inter Link products are manufactured with high-quality materials and craftsmanship. For specific warranty terms and conditions, please refer to the documentation included with your purchase or contact Inter Link customer support directly.

Note: Warranty coverage typically applies to manufacturing defects and does not cover damage resulting from improper assembly, misuse, or normal wear and tear.

Customer Support

If you require further assistance, have questions about assembly, or need to report a missing or damaged part, please contact Inter Link customer support.

For the most up-to-date contact information, please visit the official Inter Link website or refer to the contact details provided in your product packaging.

You can also find more information about Inter Link and their commitment to quality and sustainability on their brand story page:

Inter Link Official Website (Example Link)

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.