Possini Euro Design Light Blaster Art Deco Torchiere Floor Lamp Instruction Manual

Introduction

Thank you for purchasing the Possini Euro Design Light Blaster Art Deco Torchiere Floor Lamp. This manual provides detailed instructions for the safe assembly, operation, and maintenance of your new floor lamp. Designed with a brushed nickel finish and a frosted white glass bowl, this 72.5-inch tall LED torchiere lamp offers powerful, adjustable illumination for your living space.

Figure 1: The Possini Euro Design Light Blaster Art Deco Torchiere Floor Lamp in a room setting.

Important Safety Information

Please read and understand all instructions before assembling, installing, or operating this lamp. Keep this manual for future reference.

• This product is UL listed, ensuring it meets specific safety standards.
• Always unplug the lamp from the power outlet before cleaning, performing maintenance, or replacing bulbs.
• Do not exceed the maximum wattage specified for the bulbs. Use only the recommended GU24 base LED bulbs.
• Avoid placing the lamp in areas with high humidity or direct exposure to water. This product is designed for indoor use only.
• Keep children and pets away from the lamp during assembly and operation.
• WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

What's in the Box

Carefully unpack all components and inspect for any damage. Retain all packaging materials until assembly is complete and you are satisfied with the product.

• Lamp Base
• Multiple Pole Sections (threaded)
• Lamp Head Assembly (with bulb sockets)
• Frosted White Glass Bowl Shade (2 pieces)
• Metal Retainer Ring
• Four (4) 15-watt GU24 Base LED Bulbs

Figure 2: Close-up view of the lamp's top section, including the glass bowl and metal rings.

Setup and Assembly

Assembly of this lamp requires careful attention due to its weight and threaded sections. It is recommended to have two people for certain steps, especially when handling the glass shade.

1. Place the lamp base (Figure 3) on a flat, stable surface.
2. Begin assembling the pole sections by threading the first section into the lamp base. Ensure the threads align properly to avoid cross-threading. If resistance is felt, back off and try again. A small amount of lubricant on the threads can assist.
3. Continue to thread the remaining pole sections together, working your way up from the base. Note that some sections may be slightly tapered; if a section does not screw in easily, try rotating it 180 degrees or flipping it over.
4. Once all pole sections are securely connected, attach the lamp head assembly to the top pole section. Ensure the electrical wire passes freely through the pole.
5. Carefully insert the four (4) provided 15-watt GU24 base LED bulbs into their respective sockets in the lamp head.
6. With the help of a second person, carefully place the frosted white glass bowl shade onto the lamp head. Ensure it sits securely.
7. Secure the glass shade in place using the metal retainer ring. This ring is often pre-screwed into the top section and may need to be unscrewed first before placing the glass. Tighten it gently but firmly to hold the glass in position.
8. Plug the lamp's power cord into a standard 120V AC wall outlet.

Figure 3: Detailed view of the lamp's sturdy metal base.

Figure 4: Lamp dimensions: 72.5 inches tall, 19 inches wide glass, 12 inches wide base.

Operating Instructions

Your Possini Euro Design Torchiere Floor Lamp features a convenient 4-way rotary switch located on the lamp column for adjustable lighting.

• Rotate the switch clockwise to cycle through the following lighting modes:
  • First Click: One (1) bulb illuminates.
  • Second Click: Three (3) bulbs illuminate.
  • Third Click: All four (4) bulbs illuminate (total output equivalent to 300 watts).
  • Fourth Click: All bulbs turn off.
• The included LED bulbs provide a 2700K color temperature and 1350 lumens each, offering bright and warm illumination.

Figure 5: Close-up of the 4-way rotary switch on the lamp's pole.

Care and Maintenance

Proper care will ensure the longevity and appearance of your floor lamp.

• Cleaning: To clean the lamp, ensure it is unplugged and cool. Use a soft, dry, lint-free cloth to wipe down the metal surfaces. For the glass shade, a slightly damp cloth can be used, followed by a dry cloth. Avoid using abrasive cleaners, solvents, or polishes as they may damage the finish.
• Bulb Replacement:
  1. Unplug the lamp from the power outlet and allow the bulbs to cool completely.
  2. Carefully remove the glass shade and the metal retainer ring.
  3. Gently twist and pull out the old GU24 base LED bulbs.
  4. Insert new 15-watt GU24 base LED bulbs, ensuring they are securely seated.
  5. Reattach the glass shade and metal retainer ring.

Troubleshooting

If you encounter issues with your lamp, refer to the following common problems and solutions:

Specifications

Warranty and Support

For information regarding product warranty, returns, or technical support, please refer to the purchase documentation or contact the retailer/manufacturer directly. Possini Euro Design is committed to providing quality products and customer satisfaction.

Manufacturer: Possini Euro Design