Fotasy Pentax 110 Lens to Micro Four Thirds (M4/3) Adapter User Manual

1. Introduction

This instruction manual provides detailed guidance for the proper use and care of your Fotasy Pentax 110 Lens to Micro Four Thirds (M4/3) Adapter, Model MAP110. This adapter allows you to mount vintage Pentax Auto 110 lenses onto modern Olympus and Panasonic Micro Four Thirds mirrorless digital cameras. It facilitates manual control over focus and exposure, expanding your creative photographic options.

Please read this manual thoroughly before using the adapter to ensure optimal performance and longevity of your equipment.

2. Safety Information

• Always handle the adapter and lenses with clean hands to prevent dust, dirt, or oils from contaminating optical surfaces or mechanical parts.
• Avoid dropping the adapter or subjecting it to strong impacts, which can cause damage to its precision components.
• Do not attempt to disassemble or modify the adapter. Unauthorized modifications can void any potential warranty and may damage the adapter or connected equipment.
• Keep the adapter away from extreme temperatures, humidity, and corrosive substances.
• When not in use, store the adapter with both lens and body caps attached in a dry, dust-free environment.

3. Setup

3.1 Attaching a Pentax Auto 110 Lens to the Adapter

1. Ensure both the adapter and the Pentax Auto 110 lens are clean and free of dust.
2. Align the red dot on the Pentax Auto 110 lens with the red dot on the Fotasy adapter.
3. Gently insert the lens into the adapter and rotate it clockwise until it clicks securely into place. Do not force the lens.

Image: The Fotasy Pentax 110 to M4/3 adapter, showing the lens mount side with a red alignment dot.

3.2 Attaching the Adapter with Lens to your M4/3 Camera

1. Remove the body cap from your Micro Four Thirds camera and the rear cap from the adapter (with the Pentax 110 lens already attached).
2. Align the red dot on the adapter with the red dot on your camera's lens mount.
3. Gently insert the adapter into the camera mount and rotate it clockwise until it locks securely.

Image: A Pentax 110 lens attached to the Fotasy adapter, which is then mounted on a Panasonic Lumix G1 camera body.

3.3 Camera Settings for Mirrorless Cameras

Since this adapter does not have electronic contacts, your camera will not detect that a lens is attached. To enable shooting, you must adjust a specific setting in your camera's menu. This setting is often called "Shoot Without Lens" or similar.

• Navigate to your camera's shooting menu.
• Locate the option "Shoot Without Lens" or "Release Shutter Without Lens".
• Set this option to "ON" or "ENABLE".

The exact location and wording of this setting may vary depending on your camera model (e.g., Olympus, Panasonic). Consult your camera's user manual for precise instructions.

4. Operating Instructions

This adapter is designed for manual operation, meaning all camera functions that rely on electronic communication with the lens will not be available. You will need to manually control focus and exposure.

4.1 Manual Focus

• Rotate the focus ring on your Pentax Auto 110 lens to achieve sharp focus.
• Utilize your camera's focus assist features, such as focus peaking or magnification, for precise focusing.

4.2 Manual Exposure and Aperture Priority

• Aperture Control: Adjust the aperture directly on the Pentax Auto 110 lens using its aperture ring.
• Exposure Modes:
  • Manual (M) Mode: You will manually set both the shutter speed on your camera and the aperture on your lens. Use your camera's exposure meter as a guide.
  • Aperture Priority (A) Mode: You will set the aperture on your lens, and the camera will automatically select an appropriate shutter speed.
• Metering: The camera will perform Through-The-Lens (TTL) metering, but it will not receive aperture information from the lens. Adjust your exposure compensation as needed.

Automatic diaphragm, auto-focusing, and other electronic functions are not supported with this adapter.

5. Maintenance

5.1 Cleaning

• Use a soft, lint-free cloth to wipe the exterior of the adapter.
• For stubborn dirt, a slightly dampened cloth with plain water can be used, followed by immediate drying.
• Avoid using harsh chemicals, solvents, or abrasive materials, as these can damage the finish.
• Do not use cleaning solutions directly on the adapter's mounting surfaces.

5.2 Storage

• When not in use, detach the adapter from the camera body and the lens.
• Attach the appropriate front and rear caps to the adapter to protect its mounting surfaces from dust and damage.
• Store the adapter in a cool, dry place, away from direct sunlight and extreme temperature fluctuations.

6. Troubleshooting

7. Specifications

• Brand: Fotasy
• Model Name: MAP110
• Adapter Type: Pentax Auto 110 Lens to Micro Four Thirds (M4/3) Camera Body
• Compatible Lens Mount: Pentax Auto 110
• Compatible Camera Mount: Micro Four Thirds (MFT, M4/3)
• Functions Supported: Manual Focus, Manual Exposure, Aperture Priority (with manual aperture control on lens), TTL Metering.
• Functions Not Supported: Autofocus, Automatic Diaphragm, Electronic Communication.
• Material: (Not specified, but typically metal alloy for durability)
• Item Weight: Approximately 0.1 Pounds (45 grams)

8. Warranty & Support

8.1 Warranty Information

According to available product information, there is no explicit warranty provided for this product. Please refer to the retailer's return policy at the time of purchase for details on returns or exchanges.

8.2 Customer Support

For any questions, concerns, or technical assistance regarding your Fotasy adapter, please contact the seller or Fotasy customer service through their official channels. Keep your purchase receipt handy for any inquiries.