Bandai Spirits Master Grade Gundam Deathscythe EW Model Kit Instruction Manual

1. Introduction

This instruction manual provides detailed guidance for assembling, operating, and maintaining your Bandai Spirits Master Grade (MG) Gundam Deathscythe EW (Endless Waltz) plastic model kit. The Master Grade series offers highly detailed and articulated models, designed for enthusiasts seeking an engaging building experience. Please read all instructions carefully before beginning assembly.

2. Safety Information

• Age Recommendation: This model kit is recommended for ages 15 and older due to small parts and intricate assembly.
• Small Parts: Keep small parts out of reach of young children to prevent choking hazards.
• Sharp Edges: Exercise caution when cutting parts from the runners, as some edges may be sharp. Use appropriate tools like hobby nippers.
• Ventilation: If using paints or adhesives (not required but optional for customization), ensure adequate ventilation.
• Disposal: Dispose of plastic runners and waste materials responsibly.

3. Parts List Overview

Before starting assembly, verify that all runners and components are present according to the included parts diagram. The kit consists of multiple plastic runners, polycaps, and a decal sheet. No plastic cement or paint is required for basic assembly, as parts are molded in multiple colors and snap together.

Figure 3.1: Packaging box art for the Bandai Spirits Master Grade Gundam Deathscythe EW model kit. This image displays the completed model in an action pose, along with the kit's branding and series information.

4. Assembly Instructions (Setup)

Follow the numerical order of the steps provided in the included printed manual for optimal assembly. The following sections provide a general overview of the assembly process.

4.1. Preparation

• Carefully cut parts from the runners using hobby nippers. Avoid pulling or twisting parts, which can cause stress marks or breakage.
• Smooth any nubs or excess plastic using a hobby knife or sanding stick for a cleaner finish.
• Refer to the parts diagram to identify each component before assembly.

4.2. Torso Assembly

Begin by assembling the core torso unit. This typically involves combining front, back, and side armor pieces around an internal frame. Ensure all connection points snap securely into place.

4.3. Head Assembly

Assemble the head unit, paying close attention to small details like the V-fin and clear visor parts. Some kits may include LED units for the eyes (sold separately or as part of specific editions).

4.4. Arm and Leg Assembly

Construct the arm and leg units, which often involve multiple layers of internal frame and external armor. Pay attention to joint orientation for proper articulation.

4.5. Weapon and Accessory Assembly

Assemble the Beam Scythe and Buster Shield. The Buster Shield features an energy effect part that needs to be attached. Ensure these accessories are securely built for posing.

Figure 4.1: The fully assembled Bandai Spirits Master Grade Gundam Deathscythe EW model kit, showcasing its iconic Beam Scythe weapon. The model is posed dynamically, highlighting its articulation and detailed design.

Figure 4.2: A detailed view of the completed Gundam Deathscythe EW model kit, featuring both the Buster Shield with its energy effect part and the Beam Scythe. This image demonstrates the model's full armament and poseability.

5. Operating Instructions

Once assembled, your Gundam Deathscythe EW model can be posed in various dynamic stances. The Master Grade line is known for its advanced articulation.

• Joint Movement: Gently manipulate joints to achieve desired poses. Avoid excessive force to prevent breakage.
• Weapon Handling: The Beam Scythe and Buster Shield can be attached to designated hardpoints on the model. Ensure they are firmly secured.
• Display Stand: For aerial or more dynamic poses, utilize a compatible action base (sold separately) that connects to the model's back or crotch area.

6. Maintenance

Proper care will ensure the longevity and appearance of your model kit.

• Cleaning: Dust the model regularly with a soft brush or compressed air. Avoid harsh chemicals or abrasive materials.
• Storage: Store the model away from direct sunlight and extreme temperatures to prevent plastic degradation or discoloration.
• Disassembly: If disassembling, do so carefully to avoid stressing or breaking plastic parts.

7. Troubleshooting

• Loose Joints: If a joint becomes loose, a thin layer of clear nail polish or hobby cement on the ball joint (allow to dry completely before reassembly) can increase friction.
• Parts Not Fitting: Double-check the instruction manual to ensure correct part orientation. Minor sanding may be required for a snug fit in some cases.
• Missing Parts: If you discover missing parts, contact the retailer or Bandai Spirits customer support with your proof of purchase and the specific part number.

8. Specifications

9. Warranty and Support

For warranty information, missing parts, or technical support, please refer to the official Bandai Spirits website or contact your local retailer. Specific warranty terms may vary by region and retailer. Please retain your proof of purchase for any support inquiries.

Manufacturer: Bluefin Distribution Toys