Magnussen B1573 Langston Deep Cherry Finish Wood Mirror User Manual

1. Product Overview

The Magnussen B1573 Langston Mirror is designed to complement the Langston furniture collection, featuring an updated traditional style. It boasts a deep cherry finish on cherry veneers and hardwood solids, accented with gun metal hardware. This mirror is intended for wall-mounted use and includes a 1-inch bevel for enhanced aesthetic appeal.

Image 1.1: Magnussen B1573 Langston Deep Cherry Finish Wood Mirror. This image displays the full mirror with its deep cherry finish and beveled edge.

2. Safety Information

• Proper Mounting: Always ensure the mirror is securely mounted to a wall stud or using appropriate wall anchors for its weight. Failure to do so may result in the mirror falling, causing injury or damage.
• Weight Distribution: Distribute the mirror's weight evenly across mounting points.
• Avoid Impact: Do not strike the mirror surface with hard objects, as this can cause the glass to crack or shatter.
• Children and Pets: Keep children and pets away from the mirror during installation to prevent accidents.
• Cleaning: Use only recommended cleaning solutions and soft cloths to avoid damaging the finish or glass.
• Proposition 65 Warning: This product can expose you to chemicals including wood dust, which is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov.

3. Package Contents

Please check the package carefully to ensure all items are present and undamaged.

• Magnussen B1573 Langston Mirror (1)
• Mounting Hardware (Screws, Wall Anchors) (1 set) - Note: Specific hardware may vary. Always use hardware appropriate for your wall type.

4. Setup and Installation

This mirror is designed for wall mounting. Professional installation is recommended. If installing yourself, ensure you have the necessary tools and understand proper wall mounting techniques.

Tools Required (Not Included):

• Pencil
• Measuring Tape
• Level
• Stud Finder (recommended)
• Drill with appropriate drill bits
• Screwdriver (Phillips or Flathead, depending on hardware)

Installation Steps:

1. Determine Location: Choose a suitable wall location, considering height, room aesthetics, and proximity to electrical outlets or plumbing.
2. Locate Studs (Recommended): Use a stud finder to locate wall studs. Mounting into studs provides the most secure installation. If studs are not available, use heavy-duty wall anchors appropriate for the mirror's weight (40.5 lbs).
3. Mark Mounting Points: Hold the mirror against the wall at the desired height and use a pencil to mark the locations for the mounting hardware on the wall. Ensure the marks are level using a spirit level.
4. Drill Pilot Holes: Drill pilot holes at the marked locations. The size of the drill bit should match the recommendations for your chosen screws or wall anchors.
5. Install Wall Anchors (if not using studs): If not mounting into studs, insert the wall anchors into the pilot holes according to the anchor manufacturer's instructions.
6. Attach Mounting Hardware: Secure the mounting screws into the studs or wall anchors, leaving a small portion of the screw head exposed to hang the mirror. Ensure they are firmly seated.
7. Hang the Mirror: Carefully lift the mirror and align its hanging mechanisms (e.g., D-rings, wire) with the exposed screw heads. Gently lower the mirror until it is securely seated.
8. Verify Stability: Lightly tug on the mirror to ensure it is stable and does not wobble. Adjust if necessary.

Image 4.1: Example Installation Diagram. This diagram illustrates the process of marking pilot holes and securing the mirror to the wall using appropriate hardware.

5. Operating Instructions

The Magnussen B1573 Langston Mirror functions as a reflective surface. No specific operational steps are required beyond its proper installation and placement.

6. Maintenance

Cleaning the Mirror Surface:

• Use a soft, lint-free cloth (e.g., microfiber) and a non-abrasive glass cleaner.
• Spray the cleaner onto the cloth, not directly onto the mirror, to prevent liquid from seeping behind the glass or damaging the frame.
• Wipe the mirror surface gently in a consistent direction to avoid streaks.
• For stubborn spots, reapply cleaner to the cloth and gently rub.

Cleaning the Frame:

• Dust the wood frame regularly with a soft, dry cloth.
• For deeper cleaning, use a slightly damp cloth with mild soap and water, then immediately dry with a clean, soft cloth.
• Avoid harsh chemicals, abrasive cleaners, or excessive moisture, as these can damage the deep cherry finish.

7. Troubleshooting

• Mirror appears crooked after installation:

  Ensure mounting points are perfectly level. Re-measure and adjust screw placement if necessary. Verify that the hanging mechanism on the mirror is not bent or uneven.

• Streaks on mirror after cleaning:

  Use a clean, lint-free microfiber cloth. Avoid using too much cleaner. Buff gently with a dry part of the cloth or a second dry cloth.

• Mirror feels loose on the wall:

  Immediately remove the mirror. Re-evaluate your mounting method. If using wall anchors, ensure they are rated for the mirror's weight and installed correctly. If mounting into studs, ensure screws are fully engaged. Consider professional assistance for re-installation.

8. Specifications

9. Warranty and Support

This Magnussen product comes with a 12-month limited warranty from the date of purchase. This warranty covers manufacturing defects under normal use. It does not cover damage resulting from improper installation, misuse, accidents, or normal wear and tear.

For warranty claims, technical support, or inquiries regarding your Magnussen B1573 Langston Mirror, please contact Magnussen Home customer service. Please have your proof of purchase and model number (B1573) ready when contacting support.

Manufacturer: Magnussen Home DROP SHIP

For further assistance, please visit the official Magnussen website or contact their customer service department directly.