WENKO Basic Toilet Paper Holder with Cover - Stainless Steel Instruction Manual

Product Overview

The WENKO Basic Toilet Paper Holder with Cover is a stylish and functional accessory designed for your bathroom. Crafted from high-quality, polished stainless steel, it offers a modern aesthetic while providing protection for your toilet paper roll. This holder is designed for wall-mounting and includes concealed hardware for a clean finish.

Image: WENKO Basic Toilet Paper Holder with Cover, showing a roll of toilet paper inserted and the cover slightly open.

Installation Instructions

Package Contents:

• WENKO Basic Toilet Paper Holder
• Mounting screws
• Wall plugs

Tools Required:

• Drill
• Drill bit (appropriate size for wall plugs)
• Pencil
• Measuring tape
• Level

Installation Steps:

Image: Technical diagram showing the dimensions of the WENKO Basic Toilet Paper Holder in centimeters and inches.

1. Select a suitable location on your bathroom wall for installation. Ensure the surface is clean and dry.
2. Hold the toilet paper holder against the wall at the desired height and position. Use a pencil to mark the drilling points through the mounting holes.
3. Using a drill and the appropriate drill bit, carefully drill holes at the marked positions. Ensure the holes are deep enough for the wall plugs.
4. Insert the provided wall plugs into the drilled holes.
5. Align the toilet paper holder with the wall plugs and secure it firmly using the provided mounting screws. The mounting hardware is concealed for a sleek finish.
6. Test the stability of the installed holder.

Image: WENKO Basic Toilet Paper Holder installed on a tiled bathroom wall, with a toilet paper roll inserted and the cover closed.

Usage

Loading a Toilet Paper Roll:

Image: Close-up view of the WENKO Basic Toilet Paper Holder, illustrating how a toilet paper roll is placed on the spindle.

1. Lift the cover of the toilet paper holder.
2. Slide the empty toilet paper roll off the spindle, or remove the spindle if it's a spring-loaded type.
3. Place a new standard-sized toilet paper roll onto the spindle.
4. Insert the spindle with the new roll back into the holder's arms.
5. Lower the cover to protect the roll from dust and moisture.

Dispensing Toilet Paper:

Gently pull the desired length of toilet paper from the roll. The cover will lift automatically as the paper is dispensed.

Care and Maintenance

To maintain the polished finish of your stainless steel toilet paper holder, clean it regularly with a soft, damp cloth. Avoid using abrasive cleaners, scouring pads, or harsh chemicals, as these can damage the surface. Dry thoroughly after cleaning to prevent water spots.

Troubleshooting

Issue: Holder feels loose after installation.

Solution: Check if the mounting screws are tightened securely. If the wall plugs are not holding firmly, they may need to be replaced with appropriate plugs for your wall type.

Issue: Toilet paper roll does not turn smoothly.

Solution: Ensure the toilet paper roll is correctly seated on the spindle and that the spindle is properly inserted into the holder. Check for any obstructions or debris.

Product Specifications

Warranty Information

This product comes with a 10-year manufacturer's warranty from the date of purchase. The warranty covers all material and manufacturing defects that impair proper functioning. Damages resulting from improper handling or natural wear and tear are excluded. This warranty does not restrict your statutory warranty rights.

For warranty claims, please return the item, accompanied by the sales receipt and properly packaged for transport, to:

You may also contact them via email at service@wenko.de.

Customer Support

For further assistance or inquiries regarding your WENKO Basic Toilet Paper Holder, please contact WENKO customer service directly:

• Email: service@wenko.de
• Website: Visit the official WENKO website for more product information and support resources.