TableCraft Coca-Cola CC342 Napkin Dispenser

Introduction

This manual provides instructions for the proper setup, operation, and maintenance of your TableCraft Coca-Cola CC342 Napkin Dispenser. Please read these instructions carefully before use to ensure optimal performance and longevity of your product.

Key Features:

• Durable metal construction.
• Classic Coca-Cola design.
• Designed for standard tall-fold napkins.
• Compact size for various settings.

Product Overview

The TableCraft Coca-Cola CC342 Napkin Dispenser, showcasing its classic design in a typical use environment.

A clear front view of the napkin dispenser, highlighting the 'Drink Coca-Cola in Bottles' graphic.

Side view of the dispenser, featuring the 'Have a Coke' graphic on the napkin display area.

Detailed view of the side panel, showing the embossed 'Drink Coca-Cola in Bottles' text and chrome accents.

The napkin dispenser as packaged, displaying the product name and brand on the box.

Rear view of the product packaging, detailing features and dimensions in multiple languages.

Setup

1. Unpack: Carefully remove the napkin dispenser from its packaging. Inspect for any damage.
2. Placement: Choose a stable, flat surface for the dispenser. Ensure it is easily accessible for users.
3. Prepare Napkins: Obtain standard tall-fold napkins. These are typically folded in half lengthwise.
4. Load Napkins: Gently pull up the top cover of the dispenser. Insert the stack of tall-fold napkins into the dispenser, ensuring they are aligned properly within the internal mechanism. The dispenser is designed to hold approximately 150-175 tall-fold napkins.
5. Close Cover: Carefully lower the top cover back into place until it is securely seated.

Operating Instructions

1. Dispensing Napkins: To retrieve a napkin, grasp the exposed edge of the top napkin and pull it upwards and outwards. The design allows for single napkin dispensing.
2. Refilling: When the napkin supply is low, follow the 'Load Napkins' steps from the Setup section to refill the dispenser.

Maintenance

1. Cleaning: Wipe the exterior of the dispenser with a soft, damp cloth. For stubborn spots, a mild soap solution can be used. Avoid abrasive cleaners or scouring pads, as these can damage the finish.
2. Drying: Ensure the dispenser is thoroughly dried after cleaning to prevent water spots or corrosion.
3. Inspection: Periodically check the dispenser for any loose parts or damage.

Troubleshooting

• Napkins not dispensing smoothly:
  • Ensure you are using tall-fold napkins. Other napkin types may not fit or dispense correctly.
  • Check if the napkins are overloaded. Remove some napkins to reduce pressure.
  • Verify that the napkins are aligned straight within the dispenser.
• Dispenser feels unstable:
  • Ensure the dispenser is placed on a flat, level surface.
  • Check the rubber feet on the bottom of the dispenser for wear or damage.

Specifications

Video Demonstrations

Warranty and Support

For information regarding warranty coverage, product support, or to purchase replacement parts, please visit the official Tablecraft website or contact their customer service department. Keep your purchase receipt for warranty claims.

Tablecraft Website: www.tablecraft.com