Drum Workshop DW 2000 Double Bass Pedal Instruction Manual

Introduction

This manual provides instructions for the setup, operation, and maintenance of your DW 2000 Double Bass Pedal. Please read this manual thoroughly before use to ensure proper function and longevity of the product.

Package Contents

• DW 2000 Main Bass Drum Pedal
• DW 2000 Slave Bass Drum Pedal
• Complete Linkage Bar
• DWSM107 "Flyweight" Beaters (x2)
• Spring Assemblies (x2)

Image: The complete DW 2000 Double Bass Pedal system, showing both the main and slave pedals connected by the linkage bar, with beaters and spring assemblies visible.

Key Features

• Single Chain Turbo Cam: Provides a consistent and responsive feel for precise footwork.
• Bearing Spring Rocker Assembly: Ensures smooth spring action and enhances durability.
• Complete Linkage Bar: Connects the main and slave pedals for synchronized operation.
• Dual-Adjustable Toe Clamp: Securely attaches the pedal to the bass drum hoop.
• DWSM107 "Flyweight" Beater: Designed for optimal balance and impact, contributing to dynamic sound.

Setup Instructions

1. Attaching the Main Pedal to the Bass Drum

1. Position the main pedal directly in front of your bass drum.
2. Loosen the dual-adjustable toe clamp located at the front of the pedal base.
3. Slide the pedal's base plate under the bass drum hoop.
4. Tighten the toe clamp securely onto the bass drum hoop. Ensure the pedal is stable and does not move during play.

Image: Close-up view of the dual-adjustable toe clamp mechanism on the DW 2000 pedal, designed to secure the pedal to a bass drum hoop.

2. Connecting the Slave Pedal

1. Place the slave pedal to the left of the main pedal, in a comfortable playing position.
2. Connect the complete linkage bar to the drive shafts of both the main and slave pedals.
3. Secure the linkage bar connections using the provided fasteners. Ensure the bar is firmly attached and allows for smooth rotation of both pedal mechanisms.

Image: The complete linkage bar for the DW 2000 Double Bass Pedal, showing its construction and connection points.

Image: Close-up of the slave pedal's mechanism, highlighting the connection point for the linkage bar and the chain drive system.

3. Beater Installation and Adjustment

1. Insert the DWSM107 "Flyweight" beaters into the beater hubs on both pedals.
2. Adjust the beater height by loosening the set screw on the beater hub, sliding the beater rod to the desired height, and then re-tightening the set screw. The beater should strike the center of the bass drum head for optimal sound.
3. The beater angle can also be adjusted for personalized feel and response.

Image: Side view of the DW 2000 main pedal, illustrating the beater position, pedal board, and spring assembly.

4. Spring Tension Adjustment

1. Locate the spring tension adjustment nut at the bottom of each spring assembly.
2. Turn the nut clockwise to increase spring tension (firmer feel) or counter-clockwise to decrease tension (lighter feel).
3. Adjust both pedals to achieve a balanced and desired response.

Image: Close-up of the DW 2000 main pedal's spring assembly and single chain drive, showing the spring tension adjustment nut.

Operation

The DW 2000 Double Bass Pedal is designed for responsive and consistent performance. Practice with both feet to develop coordination and speed. Experiment with beater height, beater angle, and spring tension to find your preferred setup for various playing styles.

Playing Techniques

• Heel-Down Technique: Keep your heel on the pedal board for control and lighter strokes, often used for jazz or softer dynamics.
• Heel-Up Technique: Lift your heel off the pedal board for more power and speed, commonly used in rock and metal drumming.
• Swivel Technique: Utilize ankle rotation for rapid double strokes, enhancing speed and endurance.

Maintenance

Regular maintenance ensures the longevity and optimal performance of your DW 2000 Double Bass Pedal.

Cleaning

• Wipe down all metal surfaces with a soft, dry cloth after each use to remove dust and sweat.
• For stubborn grime, use a slightly damp cloth and mild soap, then dry thoroughly.
• Avoid abrasive cleaners or solvents, as these can damage the finish.

Lubrication

• Periodically apply a small amount of light machine oil to moving parts such as the chain, cam, and spring rocker assembly.
• Do not over-lubricate; excess oil can attract dust and dirt.

Inspection

• Regularly check all screws, nuts, and bolts for tightness. Re-tighten as necessary.
• Inspect the chain for any signs of wear or damage.
• Examine the beaters for wear and replace if significantly worn.

Troubleshooting

Specifications

• Model Number: DWCP2002
• Brand: Drum Workshop
• Body Material: Metal
• Material Type: Metal
• Finish Type: Unfinished
• Item Weight: 6.6 pounds (approximately 3 Kilograms)
• Product Dimensions (L x W x H): 10 x 12.75 x 8 inches
• UPC: 647139211909
• Manufacturer: Drum Workshop, Inc.
• Date First Available: July 16, 2004

Warranty and Support

For warranty information and technical support, please refer to the official Drum Workshop website or contact their customer service department. Keep your purchase receipt as proof of purchase.

For further assistance, visit: www.dwdrums.com