Bolton Furniture Mission Twin Bed Instruction Manual

1. Introduction

This manual provides detailed instructions for the assembly, usage, and maintenance of your Bolton Furniture Mission Twin Bed, Model 9921Y00. Please read this manual thoroughly before beginning assembly and retain it for future reference.

The Bolton Furniture Mission Twin Bed features solid frame construction and a honey finish, designed for durability and style. It includes a headboard, footboard, and a complete slat roll, eliminating the need for additional support.

Figure 1: Bolton Furniture Mission Twin Bed, Honey finish. This image displays the fully assembled twin bed with a headboard, footboard, side rails, and a mattress with bedding.

2. Safety Information

• Always assemble the bed on a soft, clean surface to prevent scratching.
• Ensure all hardware is securely tightened before use. Periodically check and retighten hardware as needed.
• Do not allow children to play on or under the bed during assembly.
• Do not use power tools for assembly unless specifically instructed, as overtightening can damage components.
• Keep small parts out of reach of children.
• This bed is designed for a standard twin-size mattress. Ensure the mattress fits properly to prevent gaps.

3. Package Contents

Before beginning assembly, verify that all components are present and undamaged. If any parts are missing or damaged, contact Bolton Furniture customer support.

• Headboard (1)
• Footboard (1)
• Side Rails (2)
• Slat Roll (1)
• Hardware Pack (Barrel Nuts, Bolts, Washers, Allen Wrench)

4. Setup and Assembly

Assembly of the Bolton Furniture Mission Twin Bed utilizes barrel nut and bolt metal-to-metal connections for a secure and durable structure. Two adults are recommended for assembly.

Required Tools (Not Included):

• Phillips Head Screwdriver (for slat roll attachment, if applicable)

Assembly Steps:

1. Unpack all components and lay them out on a clean, soft surface to prevent damage. Identify the Headboard, Footboard, Side Rails, and Slat Roll.
2. Attach the Side Rails to the Headboard: Align the pre-drilled holes on the side rails with the corresponding holes on the headboard posts. Insert the barrel nuts into the designated holes on the side rails and secure them with the provided bolts using the Allen wrench. Do not fully tighten yet.
3. Attach the Side Rails to the Footboard: Repeat the process from Step 2 to attach the other end of the side rails to the footboard.
4. Tighten all Connections: Once all four connections (two on the headboard, two on the footboard) are made, carefully stand the bed frame upright. Systematically tighten all barrel nut and bolt connections until secure. Avoid overtightening.
5. Install the Slat Roll: Unroll the slat roll across the width of the bed frame, resting it on the support ledges of the side rails. The slats are pre-connected for easy installation. Secure the slat roll to the side rails using the provided screws and a Phillips head screwdriver, if applicable.

5. Usage

Once assembled, the Bolton Furniture Mission Twin Bed is ready for use. Place a standard twin-size mattress directly onto the slat roll. No box spring or additional foundation is necessary as the slat roll provides adequate support.

The bed is designed for general indoor use. Avoid placing excessive weight on any single point of the bed frame. The solid frame construction is built to last under normal usage conditions.

6. Maintenance

• Cleaning: Wipe the wood surfaces with a soft, damp cloth. Avoid using harsh chemicals, abrasive cleaners, or polishes that may damage the honey finish.
• Hardware Check: Periodically (e.g., every 3-6 months) check all bolts and screws to ensure they remain tight. Retighten as necessary to maintain stability and prevent squeaking.
• Avoid Direct Sunlight: Prolonged exposure to direct sunlight can cause the wood finish to fade or change color.
• Humidity Control: Maintain a consistent humidity level in the room to prevent wood from expanding or contracting, which can lead to cracks or warping.

7. Troubleshooting

• Bed Squeaks:
  • Check all hardware connections and tighten any loose bolts.
  • Ensure the slat roll is properly seated and secured to the side rails.
• Bed Feels Unstable:
  • Verify that all barrel nut and bolt connections are fully tightened.
  • Ensure the bed is on a level surface.
• Parts Missing or Damaged:
  • Do not proceed with assembly. Contact Bolton Furniture customer support immediately for replacement parts.

8. Specifications

Figure 2: Dimensions of the Bolton Furniture Mission Twin Bed. The image shows the bed with measurements: 79 inches length, 43 inches width, and 39 inches height.

9. Warranty and Support

Bolton Furniture stands behind the quality of its products. For specific warranty information, please refer to the documentation included with your purchase or visit the official Bolton Furniture website. For assistance with assembly, missing parts, or any other product-related inquiries, please contact Bolton Furniture customer support directly.

Contact information can typically be found on the manufacturer's website or on the packaging materials.