Introduction
The Design House 514455 Millbridge 5-Light Chandelier is a traditional lighting fixture designed for indoor use in entryways, dining rooms, foyers, and kitchens. It features a durable formed steel construction with an oil rubbed bronze finish and elegant alabaster glass shades. This chandelier is rated for 120-volts and accommodates five 60-watt medium base incandescent bulbs (not included). Its design includes sprawling arms that support five downward-facing lamps, providing diffused light.
The fixture is dimmable when used with a compatible dimmer switch (not included), allowing for adjustable light brightness. It is ETL and cETL listed for use in dry locations, ensuring compliance with safety standards.
Figure 1: Front view of the Design House Millbridge 5-Light Chandelier.
Safety Information
Please read and understand all instructions before beginning installation. Failure to do so may result in electric shock, fire, or other injuries that could be fatal or cause property damage.
- Always disconnect power at the main circuit breaker before installation or servicing.
- Consult a qualified electrician if you are unsure about the installation process.
- Ensure all electrical connections are secure and comply with local codes and ordinances.
- This fixture is designed for indoor, dry location use only. Do not install in damp or wet areas.
- Do not exceed the maximum wattage specified for the bulbs.
Figure 2: UL and ETL safety certifications for the chandelier.
Package Contents
Verify that all components are present and undamaged before proceeding with installation. If any parts are missing or damaged, do not attempt to install the fixture. Contact customer service for assistance.
- Chandelier Body (1)
- Alabaster Glass Shades (5)
- Mounting Hardware (includes canopy, chain, wiring nuts, screws)
- Instruction Manual (1)
Note: Five 60-watt medium base incandescent bulbs are required but not included in the package.
Setup and Installation
This section provides general guidelines for installing your chandelier. Professional installation is recommended for safety and optimal performance.
Tools Required (Not Included):
- Phillips Head Screwdriver
- Wire Strippers
- Electrical Tape
- Ladder (if necessary)
Figure 3: Basic tools required for installation.
Installation Steps:
- Prepare for Installation: Turn off power at the circuit breaker. Ensure the mounting surface is structurally sound to support the fixture's weight (approximately 9.3 pounds).
- Assemble the Chandelier: Carefully unpack all components. Attach the chandelier arms and central column if they are not pre-assembled.
- Adjust Chain Length: The chandelier includes a 48-inch chain. Determine the desired hanging height and adjust the chain length by removing links as needed.
- Mount the Fixture: Secure the mounting bracket to the electrical junction box in the ceiling. Connect the chandelier's wires to the household electrical wires (black to black, white to white, ground to ground) using wire nuts.
- Secure the Canopy: Tuck the wires into the junction box and secure the canopy to the mounting bracket, covering the electrical connections.
- Install Glass Shades: Carefully attach each of the five alabaster glass shades to the fixture's lamp holders.
- Insert Bulbs: Screw in five 60-watt medium base incandescent bulbs into the sockets.
Figure 4: Recommended bulb type and wattage.
Figure 5: Chandelier dimensions for planning installation space.
Figure 6: Example of the chandelier installed in a dining room.
Figure 7: Example of the chandelier installed in a kitchen.
Operating Instructions
Once installed and powered, the chandelier operates like any standard light fixture. It is designed to be dimmable, offering flexibility in lighting ambiance.
- Turning On/Off: Use your wall switch to turn the chandelier on or off.
- Dimming Function: If connected to a compatible dimmer switch (sold separately), adjust the dimmer control to achieve your desired light brightness.
Maintenance
Regular maintenance will help preserve the appearance and functionality of your chandelier.
- Cleaning: To clean the fixture, turn off the power and allow it to cool. Wipe the metal parts with a soft, dry cloth. Clean the alabaster glass shades with a mild glass cleaner and a soft cloth. Avoid abrasive cleaners or solvents that could damage the finish or glass.
- Bulb Replacement: Ensure the power is off and the bulbs have cooled before replacing. Unscrew the old bulb and screw in a new 60-watt medium base incandescent bulb or LED equivalent.
Figure 8: Detail of the alabaster glass shade material.
Figure 9: Detail of the oil rubbed bronze finish, highlighting its texture and appearance.
Troubleshooting
If you encounter issues with your chandelier, refer to the following common troubleshooting steps:
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on | No power to the fixture | Check circuit breaker and wall switch. Ensure power is on. |
| Light does not turn on | Loose wiring connection | Turn off power at breaker. Check all wire connections for tightness. |
| Light does not turn on | Faulty bulb | Replace bulb with a new one of the correct type and wattage. |
| Flickering light | Loose bulb or wiring | Tighten bulbs. Check wiring connections. |
| Flickering light | Incompatible dimmer switch | Ensure dimmer switch is compatible with incandescent or LED bulbs used. |
If the problem persists after attempting these solutions, contact a qualified electrician or Design House customer support.
Specifications
| Brand | Design House |
| Model Name | Millbridge |
| Part Number | 514455 |
| Color | Oil-Rubbed Bronze |
| Material | Alloy Steel, Glass |
| Light Fixture Form | Chandelier |
| Room Type | Bedroom, Living Room, Entryway, Foyer, Dining Room, Kitchen |
| Product Dimensions | 22"L x 13.5"W x 22"H |
| Indoor/Outdoor Usage | Indoor |
| Power Source | AC/DC |
| Installation Type | Flush Mount (with chain for hanging) |
| Light Source Type | Incandescent (compatible with LED equivalent) |
| Finish Type | Oil Rubbed; Alabaster |
| Shade Material | Glass |
| Number of Light Sources | 5 |
| Wattage | 60 watts (per bulb, max) |
| Bulb Base | E26 (Medium Base) |
| Item Weight | 9.3 Pounds |
| Assembly Required | Yes |
| Certifications | ETL, cETL Listed |
Warranty
The Design House 514455 Millbridge 5-Light Chandelier comes with a 10-year limited warranty. This warranty protects against defects in materials and workmanship under normal use and service. Please retain your proof of purchase for warranty claims.
Support
For further assistance, technical support, or warranty inquiries, please visit the official Design House website or contact their customer service department. Refer to the product packaging or the Design House website for the most current contact information.
You can also visit the Design House Store on Amazon for more product information and resources.