1. Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your GROHE Allure Basin Tap Model 32146000. Please read these instructions carefully before beginning installation or use to ensure proper function and longevity of your product.
The GROHE Allure Basin Tap combines elegant design with advanced technology, featuring a monobloc installation, a durable 28 mm ceramic cartridge, and a convenient pop-up waste set. It incorporates GROHE EcoJoy for water efficiency and GROHE StarLight chrome finish for lasting durability and shine.
Image 1.1: GROHE Allure Basin Tap Model 32146000 with pop-up waste set.
2. Installation Instructions
2.1 Before You Begin
- Ensure the main water supply is turned off before starting any installation work.
- Clear the work area and ensure you have adequate lighting.
- Gather all necessary tools, including wrenches, screwdrivers, and sealing tape.
- Inspect all components for any damage before installation.
2.2 Components Overview and Dimensions
Refer to the technical drawing below for detailed dimensions and component identification. The tap features a monobloc installation requiring a single hole of approximately 34mm diameter in the basin or countertop.
Image 2.1: Technical drawing showing dimensions and connections for the GROHE Allure Basin Tap. Key dimensions include a total height of 350mm, spout reach of 191mm, and a required mounting hole diameter of 34mm. The pop-up waste set is designed for G1 1/4 connections.
2.3 Installation Steps
- Prepare the Mounting Hole: Ensure the basin or countertop has a clean, appropriately sized hole (approx. 34mm diameter) for the tap.
- Install the Tap: Place the tap body into the mounting hole. Secure it from underneath the basin using the provided rapid installation system, including the washer and fixing nut.
- Connect Water Hoses: Attach the flexible connection hoses to the hot and cold water supply lines. The tap is designed for G3/8 connections. For UK installations, UK Compression Adaptors 15 mm x 3/8 Inch (GROHE 46914000) may be required. Ensure all connections are tight and sealed to prevent leaks.
- Install Pop-Up Waste Set: Assemble the pop-up waste set according to the diagram. Insert the drain body into the basin drain hole and secure it from underneath. Connect the pull-rod mechanism to the tap lever.
- Test for Leaks: Once all connections are secure, slowly turn on the main water supply and check for any leaks around the tap base, hose connections, and waste set.
Image 2.2: Feature diagram illustrating the medium high spout for comfort, EcoJoy Technology for water saving (up to 50%), pull-rod waste set for easy drain operation, and quick and easy installation.
3. Operation
The GROHE Allure Basin Tap is designed for ease of use with precise control over water flow and temperature.
3.1 Water Flow and Temperature Control
The tap features a single lever handle with GROHE SilkMove cartridge technology, allowing for smooth and effortless adjustment of both water flow and temperature. Move the lever up to increase flow and down to decrease. Move the lever left for hot water and right for cold water.
3.2 Pop-Up Waste Set
The integrated pop-up waste set allows for convenient filling and draining of the basin. Pull the small rod located at the back of the tap body upwards to close the drain, retaining water in the basin. Push the rod downwards to open the drain, allowing water to flow out.
Image 3.1: A person operating the GROHE Allure Basin Tap, demonstrating typical use for water flow and temperature adjustment.
4. Care and Maintenance
To ensure the lasting beauty and performance of your GROHE Allure Basin Tap, follow these simple care instructions. The GROHE StarLight chrome finish is designed to resist tarnishing and flaking.
4.1 Cleaning the Chrome Finish
- Use only mild soap and water with a soft cloth for regular cleaning.
- Avoid abrasive cleaners, scouring pads, or harsh chemicals (e.g., ammonia-based cleaners, bleach) as these can damage the chrome finish.
- Rinse thoroughly with clean water after cleaning and dry with a soft cloth to prevent water spots.
4.2 Aerator Maintenance
Periodically check the aerator at the tip of the spout for mineral buildup or debris, which can reduce water flow. Unscrew the aerator, clean it with a soft brush under running water, and reattach it securely.
5. Troubleshooting
This section addresses common issues you might encounter with your basin tap. For problems not listed here, please contact GROHE customer support.
5.1 Low Water Flow
- Check Aerator: A clogged aerator is a common cause of low flow. Refer to Section 4.2 for cleaning instructions.
- Check Water Supply: Ensure both hot and cold water supply valves are fully open.
- Inspect Hoses: Check flexible connection hoses for kinks or obstructions.
5.2 Leaking Faucet
- Check Connections: Ensure all water supply hose connections are tight.
- Inspect Cartridge: If leaks persist from the spout or handle base, the ceramic cartridge may need inspection or replacement. This typically requires professional assistance.
5.3 Pop-Up Waste Malfunction
- Check Linkage: Ensure the pull-rod is correctly connected to the waste stopper mechanism and moves freely.
- Clear Obstructions: Remove the stopper and check for any debris preventing it from sealing or opening properly.
6. Technical Specifications
Below are the key technical specifications for the GROHE Allure Basin Tap Model 32146000.
| Feature | Specification |
|---|---|
| Brand | GROHE |
| Model Number | 32146000 |
| Mounting Type | Deck Mount (Single Hole) |
| Finish Type | Chrome (GROHE StarLight) |
| Material | Stainless Steel (Body), Ceramic (Handle Material) |
| Number of Handles | 1 (Lever Handle) |
| Included Components | Basin Mixer Tap, Pop-Up Waste Set, Flexible Connection Hoses |
| Hole Count | 1 |
| Special Feature | Pop Up Drain, GROHE EcoJoy, GROHE SilkMove Cartridge |
| Installation Method | Single Hole |
| Spout Reach | 19.5 Centimeters |
| Item Weight | 2.62 Kilograms |
| Recommended Pressure | Min. 1.0 bar (High pressure) |
7. Warranty Information
GROHE products are manufactured to the highest quality standards and come with a comprehensive warranty, ensuring peace of mind for your purchase.
The GROHE Allure Basin Tap Model 32146000 is covered by a GROHE 5 Year Guarantee. This warranty covers manufacturing defects and ensures the product's quality and durability under normal use. Please retain your proof of purchase for any warranty claims.
Image 7.1: GROHE 5 Year Guarantee logo, indicating the warranty period for the product.
8. Customer Support
For further assistance, technical support, or inquiries regarding spare parts, please contact GROHE customer service. You can find contact information, including phone numbers and online support options, on the official GROHE website.
When contacting support, please have your product model number (32146000) and proof of purchase readily available.
