Introduction
The Kwikset Belleview Single Cylinder Exterior Only Handleset is designed to provide trusted security and elegant style for your exterior doors. This handleset is an exterior pack only, intended to be paired with a compatible Kwikset interior pack knob or lever to complete your preferred lock style. It features a durable Antique Brass finish and is engineered for reliable performance.
Setup
Unpacking and Inspection
Before beginning installation, carefully unpack all components and inspect them for any damage or missing parts. Ensure you have all the necessary items as listed below:
- Exterior Handleset Assembly
- Deadbolt
- Latch (with round corner faceplate)
- Keys
- Mounting Hardware (screws, etc.)
Image: All components included with the Kwikset Belleview Single Cylinder Exterior Only Handleset.
Installation Steps
This handleset is designed for easy installation on standard door preparations. For detailed visual instructions, refer to the Kwikset installation guide provided with your product. The general steps are as follows:
- Prepare the Door: Ensure your door has the correct bore holes and backset. This handleset includes an adjustable backset to fit all standard door preparations.
- Install the Latch: Insert the latch into the edge bore hole of the door. Secure it with the provided screws.
- Install the Deadbolt: Insert the deadbolt into the upper bore hole. Ensure the deadbolt is oriented correctly.
- Install the Exterior Handleset: Position the exterior handleset assembly, aligning the posts with the holes in the door.
- Attach Interior Components: Connect the interior knob or lever (sold separately) to the exterior handleset, securing it with the appropriate screws.
- Test Operation: Once installed, test the handleset and deadbolt with the key and interior turnpiece to ensure smooth operation.
Image: Example of a Kwikset handleset installed on a door.
Operating the Handleset
Locking and Unlocking
The Kwikset Belleview Single Cylinder Exterior Only Handleset provides secure entry and exit. The handleset can be locked or unlocked using a key from the outside. From the inside, it can be locked or unlocked using the turnpiece.
- To Lock from Outside: Insert the key into the cylinder and turn it to engage the deadbolt. Remove the key.
- To Unlock from Outside: Insert the key into the cylinder and turn it to retract the deadbolt.
- To Lock from Inside: Rotate the turnpiece on the interior side of the deadbolt to engage the lock.
- To Unlock from Inside: Rotate the turnpiece on the interior side of the deadbolt to retract the lock.
Note: This is an exterior-only handleset. The latch mechanism on the handleset itself is non-functioning and requires an interior knob or lever for operation.
Maintenance
Proper care and maintenance will ensure the longevity and smooth operation of your Kwikset handleset.
- Cleaning: Clean the handleset regularly with a soft, damp cloth. Avoid using abrasive cleaners, solvents, or harsh chemicals, as these can damage the finish.
- Lubrication: Periodically lubricate the internal mechanisms of the lock and deadbolt with a silicone-based lubricant. Do not use oil-based lubricants, as they can attract dirt and debris.
- Tighten Screws: Over time, screws may loosen. Periodically check and tighten all mounting screws to ensure the handleset remains securely attached to the door.
Troubleshooting
If you encounter any issues with your Kwikset handleset, refer to the common problems and solutions below:
| Problem | Possible Cause | Solution |
|---|---|---|
| Key does not turn smoothly | Dirt or debris in cylinder; worn key | Spray graphite lubricant into the keyway. Try a new, uncut key if available. |
| Deadbolt does not extend/retract fully | Misalignment of strike plate; loose screws; worn mechanism | Check and adjust the strike plate. Tighten all mounting screws. Lubricate the deadbolt mechanism. |
| Handleset feels loose on the door | Loose mounting screws | Tighten all visible mounting screws on both the exterior and interior sides of the handleset. |
Specifications
Detailed specifications for the Kwikset Belleview Single Cylinder Exterior Only Handleset:
| Feature | Detail |
|---|---|
| Model Number | 96870-093 |
| Part Number | 687BWLIP-5 |
| Material | Brass |
| Color / Finish | Antique Brass/Brass |
| Product Dimensions | 16.2"L x 7.3"W |
| Item Weight | 3 Pounds |
| Lock Type | Key Lock (Single Cylinder) |
| Certification | ANSI/BHMA Grade 3 Certified (Deadbolt) |
| Special Feature | Easy to Install, Adjustable Backset |
| Batteries Required? | No |
Image: Handleset dimensions for reference.
Warranty & Support
Warranty Information
The Kwikset Belleview Single Cylinder Exterior Only Handleset comes with a Lifetime Mechanical & Finish warranty. This warranty covers defects in material and workmanship for the lifetime of the original residential purchaser. For full details and terms, please refer to the official Kwikset warranty documentation included with your product or visit the Kwikset website.
Customer Support
For further assistance, technical support, or warranty claims, please contact Kwikset Customer Service. You can typically find contact information on the Kwikset official website or within the product packaging. Please have your model number (96870-093) and purchase details ready when contacting support.