Peterson Dynamic Microphone Model 403872 Instruction Manual

1. Introduction and Overview

The Peterson Dynamic Microphone Model 403872 is a small, lightweight, and portable microphone designed for enhanced audio input with compatible devices. It comes with a protective cover and is ideal for use with applications requiring a full-range microphone, such as the istrobosoft tuning application by Peterson tuners, and other iTunes applications that utilize microphone input. Its compact design allows for easy attachment to a key-ring or lanyard, ensuring convenient access.

2. What's in the Box

• Peterson Dynamic Microphone Model 403872
• Protective Cover

3. Setup Instructions

1. Unpack the Microphone: Carefully remove the Peterson Dynamic Microphone from its packaging.
2. Remove Protective Cover: If present, gently remove the protective cover from the microphone's audio jack.
3. Connect to Device: Insert the microphone's audio jack into the compatible audio input port of your smartphone or tablet (e.g., iPhone, iPad, iPod touch). Ensure a secure connection.
4. Device Compatibility Note: This microphone is not compatible with 1st Generation iPod Touch devices.

Image: Peterson Dynamic Microphone with its audio jack ready for connection. The microphone is black with a silver audio jack.

4. Operating Instructions

1. Launch Application: Open the desired audio recording or tuning application on your connected device.
2. Select Microphone Input: In most applications, the device should automatically detect the external microphone. If not, navigate to the application's settings and select the external microphone as the audio input source.
3. Positioning: For optimal audio capture, position the microphone appropriately for your use case. Its omnidirectional polar pattern captures sound from all directions.
4. Testing: Perform a test recording or use the application's input level meter to ensure the microphone is functioning correctly and capturing sound at an appropriate level.
5. Specific Use: The microphone's sensitivity is optimized for applications like the istrobosoft tuning application, providing accurate and responsive input.

5. Maintenance and Care

• Cleaning: Use a soft, dry cloth to clean the exterior of the microphone. Do not use liquid cleaners or solvents.
• Storage: When not in use, store the microphone in its protective cover to prevent dust and damage. Avoid extreme temperatures and humidity.
• Handling: Handle the microphone with care. Avoid dropping it or subjecting it to strong impacts.
• Key-Ring/Lanyard Use: While designed for attachment, ensure the attachment point is secure and regularly checked to prevent loss.

6. Troubleshooting

• No Sound Input:
  • Ensure the microphone is fully inserted into the device's audio port.
  • Check your device's audio input settings to confirm the external microphone is selected.
  • Verify that the application you are using supports external microphone input.
  • Confirm your device is not a 1st Generation iPod Touch, as it is incompatible.
• Poor Audio Quality:
  • Ensure the microphone is positioned correctly and not obstructed.
  • Check for any debris in the microphone's grille or the device's audio port.
  • Test with a different audio application to rule out application-specific issues.

7. Specifications

Image: The compact size of the Peterson Dynamic Microphone, measuring approximately 1.4 inches (3 cm) in length.

8. Warranty and Support

For warranty information, technical support, or service inquiries regarding your Peterson Dynamic Microphone Model 403872, please refer to the official Peterson website or contact their customer service department. Keep your purchase receipt for warranty validation.