Introduction
This manual provides comprehensive instructions for the proper use, application, and care of House of Kolor F32-6Z Fireball Flake F-32. Adhering to these guidelines will ensure optimal results and product performance. Please read all instructions carefully before beginning any application.
Product Overview
The House of Kolor F32-6Z Fireball Flake F-32 is a high-quality, ultra-thin metallic flake designed to be added to clear coats or Kandy paints to achieve a vibrant, sparkling effect on automotive surfaces. These flakes are engineered for ease of application and superior smoothness, providing tremendous sparkle without excessive texture. The product is supplied in a 6-ounce jar.
Key features include:
- Ultra-thin flakes for smoother finishes.
- Designed for integration with House of Kolor SG Karriers and Klears.
- Provides significant sparkle and depth to custom paint jobs.
Safety Information
Always prioritize safety when working with automotive paint products. Failure to follow safety precautions can result in injury or health hazards.
- Ventilation: Work in a well-ventilated area or use a forced-air respirator to avoid inhaling paint fumes and dust.
- Protective Gear: Wear appropriate personal protective equipment (PPE), including safety glasses or goggles, chemical-resistant gloves, and protective clothing.
- Flammability: This product may be flammable. Keep away from open flames, sparks, and other ignition sources. Do not smoke while handling.
- Skin and Eye Contact: Avoid direct contact with skin and eyes. In case of contact, flush immediately with plenty of water and seek medical attention if irritation persists.
- Storage: Store in a cool, dry place, away from direct sunlight and out of reach of children and pets. Keep containers tightly closed.
Preparation
Surface Preparation
Ensure the surface to be painted is clean, dry, and properly prepared according to standard automotive painting practices. This includes sanding, cleaning, and applying appropriate primers or base coats. The surface should be free of dust, grease, oil, and other contaminants to ensure proper adhesion and finish quality.
Mixing Instructions
The Fireball Flakes are designed to be mixed into House of Kolor SG Karriers (intercoat clear) or Kandy paints. The ratio of flakes to clear/Kandy can vary based on the desired effect and sparkle intensity. Start with a small amount of flakes and gradually add more until the desired concentration is achieved. Stir thoroughly to ensure even distribution of flakes. It is recommended to perform a test spray on a sample panel to verify the flake density before applying to the final project.
This image illustrates the visual effect of the House of Kolor F32-6Z Fireball Flake F-32 when applied. The deep red base is enhanced with numerous reflective flakes, creating a vibrant, sparkling metallic finish suitable for custom automotive applications.
Application
Spray Gun Setup
Use a spray gun with an appropriate tip size for flake application. A larger tip size (e.g., 1.4mm to 1.8mm) may be necessary to allow the flakes to pass through without clogging. Adjust air pressure and fluid delivery to achieve an even, consistent spray pattern. Always clean your spray gun thoroughly before and after use.
Application Technique
- Apply the flake-mixed clear or Kandy in light, even coats. Avoid applying too heavily, as this can lead to uneven flake distribution or runs.
- Allow adequate flash-off time between coats as recommended by the specific clear or Kandy product being used.
- Typically, 2-3 coats are sufficient to achieve a good flake density, but more coats can be applied for a more intense effect.
- After achieving the desired flake coverage, apply several coats of a high-quality clear coat to encapsulate the flakes and provide a smooth, durable finish. Sanding between clear coats may be necessary to achieve a perfectly smooth surface, especially with higher flake concentrations.
Maintenance & Care
Storage
Store the House of Kolor F32-6Z Fireball Flake F-32 in its original tightly sealed container in a cool, dry, and well-ventilated area. Protect from freezing temperatures and direct sunlight. Ensure the storage area is free from ignition sources.
Cleaning Equipment
Clean all spray equipment immediately after use with appropriate paint reducers or gun cleaners. Proper cleaning prevents clogging and extends the life of your equipment.
Troubleshooting
| Issue | Possible Cause | Solution |
|---|---|---|
| Uneven Flake Distribution | Insufficient mixing; improper spray technique; incorrect tip size. | Ensure thorough mixing before and during application. Adjust spray gun settings and technique for even coverage. Use appropriate tip size. |
| Rough or Textured Finish | Too many flakes; insufficient clear coat; flakes not fully encapsulated. | Reduce flake concentration. Apply additional clear coats. Wet sand and buff clear coat for smoothness. |
| Clogging of Spray Gun | Flakes too large for tip size; inadequate thinning of clear/Kandy. | Use a larger spray gun tip. Ensure clear/Kandy is thinned to manufacturer specifications. |
| Dull or Lackluster Sparkle | Flakes buried too deep in clear; insufficient flake concentration. | Increase flake concentration. Ensure flakes are suspended closer to the surface of the clear coat. |
Specifications
| Attribute | Detail |
|---|---|
| Brand | House of Kolor |
| Model Number | F32-6Z |
| Color | Red (Fireball Flake) |
| Finish Type | Metallic |
| Unit Count | 6.0 Ounce |
| Paint Type | Flake Additive |
| Specific Uses For Product | Automotive Bodies |
| Surface Recommendation | Metal, Plastic (when properly primed/base coated) |
| Indoor/Outdoor Usage | Outdoor (as part of a durable paint system) |
| Item Form | Liquid (when mixed) / Flakes (dry) |
| Included Components | Flakes |
| Water Resistance Level | Water Repellent (when properly clear coated) |
Warranty and Support
Warranty information for the House of Kolor F32-6Z Fireball Flake F-32 is not provided within this document. For details regarding product warranty, technical support, or further assistance, please contact House of Kolor directly through their official website or customer service channels.