Cra-Z-Art Scented Spinning Art Machine (Model 14501) Instruction Manual

Introduction

The Cra-Z-Art Scented Spinning Art Machine allows children to easily create awesome scented swirling art. This kit enhances ordinary birthday cards, photo frames, bookmarks, and more with scented banana, blueberry, and cherry paints. It encourages creativity and imagination for hours of fun. The machine features a splash guard for mess-free operation and paint tube storage on its base.

Image: The Cra-Z-Art Scented Spinning Art Machine product box, showcasing the machine and examples of artwork.

Safety Information

WARNING: CHOKING HAZARD—Small parts. Not for children under 3 years. Adult supervision is recommended during use. Ensure all paint is kept away from furniture, fabrics, and clothing. In case of contact, wash immediately with water. All included paints are clean, washable, safe, and non-toxic.

Image: A red warning label indicating "CHOKING HAZARD—Small parts. Not for children under 3 years."

What's Included

Your Cra-Z-Art Scented Spinning Art Machine kit includes the following components:

• 1 Motorized Paint Spinner Unit
• 3 Scented Paints (Banana, Blueberry, Cherry)
• 20 Sheets of Paper (in two sizes)
• 2 Holographic Sheets of Paper
• Splash Guard

Image: The Cra-Z-Art Scented Spinning Art Machine with included paper sheets and paint bottles.

Setup

1. Battery Installation: The motorized spin art machine requires 2 "C" cell batteries (not included). Open the battery compartment, insert the batteries according to polarity, and securely close the compartment.
2. Prepare Workstation: Choose a flat, stable surface. It is recommended to cover your workstation with newspaper or a towel to protect against any potential paint splashes.
3. Attach Splash Guard: Place the clear splash guard securely over the spinning platform to minimize mess during operation.

Image: An exploded view of the spinning art machine showing the base, spinner, and splash guard components.

Operating Instructions

1. Creating Swirling Art

1. Position Paper: Place a sheet of paper onto the spinning platform. Ensure it is centered and secured under the spinner tabs.
2. Turn On: Slide the switch to "ON" to start the motorized spinning art machine.
3. Apply Paint: While the paper is spinning, gently squeeze drops of scented paint onto the paper. Experiment with different colors and varying the speed of paint application to create unique swirling patterns.
4. Finish: Once satisfied with your design, turn the spinning art machine off. Carefully remove the paper and allow it to dry completely.

Image: A hand dropping blue paint onto a white paper disc spinning on the Cra-Z-Art machine, creating a colorful pattern.

Image: A completed piece of swirling art with multiple colors, next to the spinning art machine.

2. Product Overview Video

Maintenance and Cleaning

After each use, clean the spinning platform and splash guard with a damp cloth to prevent paint from drying and accumulating. The paints are washable, making cleanup simple. Ensure the machine is turned off and batteries are removed before performing any extensive cleaning.

Troubleshooting

• Machine Not Spinning: Check if the "ON/OFF" switch is in the "ON" position. Ensure that 2 "C" cell batteries are correctly installed and are not depleted.
• Paint Not Spreading Evenly: Ensure the paper is flat and securely centered on the spinning platform. Adjust the amount and speed of paint drops.
• Excessive Splatter: Verify that the splash guard is properly attached and seated. Reduce the amount of paint applied at once.

Specifications

Warranty and Support

For warranty information or product support, please refer to the contact details provided on the product packaging or visit the official Cra-Z-Art website. Keep your purchase receipt for any warranty claims.