Bulova B1929 Annette I Chiming Mantel Clock User Manual

1. Product Overview

The Bulova B1929 Annette I Chiming Mantel Clock is a classic timepiece designed to enhance any living space. Featuring a rich mahogany finish and a polished gold-finish bezel, this battery-powered clock offers an analog display with Roman numerals. It plays the Westminster melody on the hour and includes an adjustable volume control and a night shut-off feature for the chime.

Figure 1: Front view of the Bulova B1929 Annette I Chiming Mantel Clock, showcasing its mahogany finish and gold bezel.

Figure 2: The Bulova B1929 clock displayed on a mantelpiece, illustrating its elegant presence in a home setting.

2. Setup Instructions

2.1. Battery Installation

The Bulova B1929 clock requires a total of three (3) AA batteries: one for the clock movement and two for the chiming mechanism. Batteries are not included and must be purchased separately.

1. Carefully turn the clock over to access the back panel.
2. Locate the battery compartments. There will be one compartment for the clock movement and a separate compartment for the chime unit.
3. Insert one (1) AA battery into the clock movement compartment, ensuring the correct polarity (+/-).
4. Insert two (2) AA batteries into the chime unit compartment, ensuring the correct polarity (+/-).
5. Replace the battery compartment covers securely.

2.2. Setting the Time

To set the correct time:

1. Locate the time-setting knob on the back of the clock movement.
2. Gently turn the knob clockwise until the hands indicate the correct time.
3. Allow the clock to run for a few minutes to ensure it is keeping accurate time.

Figure 3: A detailed view of the clock face, showing the Roman numerals and the Bulova branding.

2.3. Setting the Chime

The chime unit has controls for volume and a night shut-off feature. These controls are typically located on the back of the clock, near the chime battery compartment.

• Volume Control: Use the rotary knob to adjust the chime volume to your preference. Turn clockwise for louder, counter-clockwise for softer.
• Night Shut-Off: The clock features an automatic night shut-off for the chime, typically from 11:00 PM to 5:00 AM. Ensure the switch is set to the 'ON' position for this feature to be active. If you prefer the chime to be off completely, set the switch to 'OFF'.
• Chime Synchronization: After setting the time, the chime should automatically synchronize. If the chime does not strike the correct hour, allow the clock to run for a full 12-hour cycle, and it should self-correct.

3. Operating Instructions

Once set up, the Bulova B1929 clock operates continuously, providing accurate time and hourly chimes. The Westminster melody will play on the hour, except during the automatic night shut-off period (if activated).

• The clock's analog display shows hours, minutes, and seconds.
• The Westminster chime will sound at the top of each hour.
• If the night shut-off feature is enabled, the chime will be silent between 11:00 PM and 5:00 AM.

4. Maintenance

4.1. Battery Replacement

Replace batteries annually or when the clock movement slows, stops, or the chime becomes weak or ceases to function. Always replace all batteries in a compartment at the same time with new, high-quality AA batteries.

4.2. Cleaning

To maintain the appearance of your clock:

• Wipe the wooden case with a soft, dry cloth. Avoid abrasive cleaners or polishes that may damage the finish.
• For the gold-finish bezel and metal dial, use a soft, lint-free cloth. Do not use chemical cleaners, as they may tarnish or damage the finish.
• Keep the clock away from direct sunlight and extreme temperature changes to prevent warping or fading of the wood.

5. Troubleshooting

• Clock Not Running: Check if the AA battery for the clock movement is inserted correctly and is not depleted. Replace if necessary.
• Chime Not Working: Ensure the two AA batteries for the chime unit are correctly installed and not depleted. Check the 'CHIME' switch on the back of the clock; it should be in the 'ON' position. Verify that the night shut-off feature is not active if you expect the chime to sound during those hours.
• Incorrect Chime Timing: If the chime does not strike the correct hour, allow the clock to run for a full 12-hour cycle. The chime mechanism is designed to self-synchronize. If the issue persists, remove and reinsert the chime batteries, then reset the time.
• Weak Chime Sound: Adjust the volume control knob on the back of the clock. If the sound remains weak, replace the two AA batteries for the chime unit.

6. Specifications

7. Warranty and Support

For warranty information, product support, or service inquiries regarding your Bulova B1929 Annette I Chiming Mantel Clock, please refer to the documentation included with your purchase or contact Bulova customer service directly. Contact details can typically be found on the manufacturer's official website or on the product packaging.