1. Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your Dornbracht Meta.02 Wall-Mounted Tumbler Holder, model 83401979-00. Please read these instructions carefully before installation and retain them for future reference. This product is designed for holding a tumbler in a bathroom setting.
2. Safety Information
- Ensure all installation steps are followed precisely to prevent damage or injury.
- Use appropriate tools for installation.
- Do not overtighten screws, as this may damage the product or mounting surface.
- Keep small parts out of reach of children.
- Regularly check the holder for stability and tighten any loose connections.
3. Package Contents
Verify that all components are present before beginning installation:
- Dornbracht Meta.02 Tumbler Holder (Polished Chrome)
- Crystal Glass Tumbler (Matte)
- Mounting Hardware (screws, wall anchors)
- Installation Template (if provided, otherwise measure carefully)
Figure 1: Dornbracht Meta.02 Wall-Mounted Tumbler Holder. This image displays the polished chrome holder with its accompanying matte crystal glass tumbler, ready for installation.
4. Installation Instructions
Tools Required:
- Drill
- Drill bit appropriate for wall anchors
- Phillips head screwdriver
- Pencil
- Measuring tape
- Level
Step-by-Step Guide:
- Select Location: Choose a suitable wall location for the tumbler holder, ensuring it is at a convenient height and clear of any electrical wiring or plumbing.
- Mark Drilling Points: Use the provided installation template (if available) or measure carefully to mark the drilling points on the wall with a pencil. Ensure the marks are level.
- Drill Holes: Drill holes at the marked points using a drill bit appropriate for the wall anchors. The depth of the holes should match the length of the anchors.
- Insert Wall Anchors: Gently tap the wall anchors into the drilled holes until they are flush with the wall surface.
- Attach Mounting Plate: Position the mounting plate over the wall anchors and secure it with the provided screws using a Phillips head screwdriver. Do not overtighten.
- Mount Tumbler Holder: Align the tumbler holder with the mounting plate. Secure the holder to the plate using the set screw, typically located on the underside of the holder. Tighten the set screw firmly but carefully.
- Insert Tumbler: Place the crystal glass tumbler into the holder.
- Test Stability: Gently test the stability of the installed holder to ensure it is securely fastened to the wall.
5. Operation
The Dornbracht Meta.02 Tumbler Holder is designed for straightforward use. Simply place your tumbler into the holder for storage. To use the tumbler, lift it out of the holder. Ensure the tumbler is placed securely to prevent accidental falls.
6. Maintenance and Care
To maintain the polished chrome finish and the crystal glass tumbler, follow these care instructions:
- Cleaning the Chrome Finish: Use a soft, damp cloth and a mild, non-abrasive cleaner specifically designed for chrome surfaces. Avoid harsh chemicals, abrasive pads, or acidic cleaners, as these can damage the finish. Wipe dry immediately after cleaning to prevent water spots.
- Cleaning the Glass Tumbler: The crystal glass tumbler can be washed with warm soapy water or placed in a dishwasher. Ensure it is thoroughly rinsed and dried before returning it to the holder.
- Regular Inspection: Periodically check the mounting screws for tightness. If any looseness is detected, gently tighten the screws to ensure the holder remains secure.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Holder feels loose on the wall. | Mounting screws are loose or wall anchors are not secure. | Gently tighten the mounting screws. If the problem persists, the wall anchors may need to be re-seated or replaced with more appropriate ones for your wall type. |
| Chrome finish appears dull or stained. | Water spots, soap residue, or improper cleaning agents. | Clean with a soft, damp cloth and a mild chrome cleaner. Dry immediately. Avoid abrasive cleaners. |
8. Specifications
- Brand: Dornbracht
- Model: Meta.02
- Part Number: 83401979-00
- Mounting Type: Wall Mount
- Finish Type: Polished Chrome (Holder), Matte (Glass Tumbler)
- Material: Chrome (Holder), Crystal Glass (Tumbler)
- Style: Modern
- Item Weight: Approximately 2.2 Pounds (1 kg)
- Dimensions (approximate, based on description): Diameter 60 mm, Height 120 mm, Projection 110 mm
9. Warranty and Support
For specific warranty information and customer support, please refer to the documentation included with your purchase or visit the official Dornbracht website. Keep your proof of purchase for warranty claims.
Dornbracht Official Website: www.dornbracht.com
