Craig Frames 26021 Picture Frame User Manual

1. Introduction and Overview

This manual provides detailed instructions for the setup, use, and maintenance of your Craig Frames 26021 12 by 12-Inch Picture Frame. Designed with a smooth whitewash finish, this frame is crafted to display your cherished photos or prints with elegance and ease. Please read through these instructions carefully to ensure proper handling and longevity of your product.

Figure 1.1: Craig Frames 26021 12x12-inch Picture Frame, Whitewash.

2. Product Features

• Craft Style Finish: Features a flat white frame with a smooth whitewashed finish, offering a versatile aesthetic for various decor styles.
• Complete Assembly: Each frame includes a glass front, a rigid black backing, and pre-attached stamped hanging hardware for immediate use.
• Optimal Display Size: Designed to hold a 12 inch by 12 inch photo or print. Note that the viewable area is slightly smaller due to the frame overlap.
• Durable Construction: The frame moulding is 1.26 inches wide and constructed from wood composite material, ensuring durability.
• Made in the U.S.A.: Proudly manufactured in the United States.

3. Setup Instructions

Follow these steps to properly set up your picture frame and insert your artwork or photo.

3.1 Unpacking the Frame

1. Carefully remove the frame from its packaging. Inspect for any damage during transit.
2. Place the frame face down on a clean, flat, and soft surface to prevent scratches to the frame or glass.

3.2 Inserting Your Photo/Artwork

1. Locate the flexible metal tabs or swivel clips on the back of the frame. Gently bend or turn them to release the black backing board.
2. Remove the backing board and any protective paper or film from the glass. For frames smaller than 12x18 inches, a glass facing is included. Ensure both sides of the glass are clean.

Figure 3.1: Frames smaller than 12x18 inches include a glass facing.
3. Place your 12x12 inch photo or artwork against the glass. Ensure it is centered and aligned as desired.
4. Carefully place the black backing board back into the frame, securing it with the flexible metal tabs or swivel clips. Ensure all tabs are flat against the backing to hold it securely.

3.3 Hanging the Frame

The frame comes with pre-attached stamped hanging hardware, allowing for both horizontal and vertical display.

Figure 3.2: Back of the frame with pre-attached hangers.

Figure 3.3: Detail of the stamped hanging hardware.

1. Determine the desired orientation (horizontal or vertical) for your frame.
2. Identify the appropriate hanging hardware on the back of the frame for your chosen orientation.
3. Using a wall hook or nail (not included), hang the frame securely on your wall. Ensure the hook or nail is strong enough to support the frame's weight (approximately 4 pounds).

4. Operating Instructions

Once your photo or artwork is securely placed within the frame and it is hung, no further operation is required. The frame is designed for static display. Avoid frequent removal or re-insertion of artwork to minimize wear on the backing tabs.

5. Maintenance

Proper care will help maintain the appearance and longevity of your Craig Frames picture frame.

• Cleaning the Frame: Wipe the frame moulding with a soft, dry, lint-free cloth. For stubborn marks, a slightly damp cloth can be used, followed immediately by a dry cloth. Avoid abrasive cleaners or solvents, as they may damage the finish.
• Cleaning the Glass: For the glass front, use a standard glass cleaner and a soft, lint-free cloth. Spray the cleaner onto the cloth first, rather than directly onto the glass, to prevent liquid from seeping into the frame edges.
• Handling: Always handle the frame by its sides to avoid touching the glass or damaging the finish.
• Storage: If storing the frame, keep it in a dry, temperature-controlled environment, preferably in its original packaging or wrapped in protective material to prevent dust and scratches.

6. Troubleshooting

Most issues with a picture frame are related to handling or display. Here are some common concerns:

• Photo Does Not Fit: Ensure your photo or print is exactly 12x12 inches. If it is slightly larger, minor trimming may be required. If it is smaller, consider using a mat board (not included) to fill the space.
• Frame Appears Crooked: Adjust the frame on the wall hook or nail until it is level. Ensure the wall hook or nail is securely installed and level.
• Dust or Debris Inside Glass: If dust or debris is visible between the glass and your artwork, carefully remove the backing and artwork (refer to Section 3.2), clean the inside of the glass and the artwork with a lint-free cloth, and reassemble.
• Scratches on Glass/Frame: Minor scratches on the frame finish may be touched up with appropriate paint. Deep scratches on the glass may require replacement of the glass panel.

7. Specifications

Figure 7.1: Frame moulding dimensions.

8. Warranty and Support

Craig Frames products are manufactured with quality and care. While specific warranty details are not provided in the product listing, standard return policies typically apply for new products purchased from authorized retailers. For this product, a 30-day return policy is generally offered by sellers.

For any questions, concerns, or support regarding your Craig Frames product, please contact the manufacturer directly:

Manufacturer: Craig Frames Inc.

You may also visit the official Craig Frames store for more information and contact options: Craig Frames Store