Introduction
This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your Keurig Caf One-Touch Milk Frother. Please read it thoroughly before first use and retain it for future reference.
The Keurig Caf One-Touch Milk Frother is designed to perfectly steam or froth milk for your favorite coffee beverages, such as cappuccinos and lattes. It features an easy-to-clean non-stick surface and a cordless frothing pitcher with a premium brushed stainless steel exterior.
Product Overview
Figure 1: Keurig Caf One-Touch Milk Frother. This image shows the stainless steel frother unit with a black handle and base, and a red illuminated power button on the front.
Key features include:
- Capable of making frothed or warmed milk.
- Features an easy-to-clean non-stick interior surface.
- Designed with a cordless frothing pitcher for convenience.
- Compact dimensions: approximately 4.5 inches wide by 7 inches high.
- Includes recipes for various coffee beverages.
Setup
- Unpacking: Carefully remove all components from the packaging. Retain packaging for future storage or transport.
- Initial Cleaning: Before first use, wash the frothing pitcher and lid with warm, soapy water. Rinse thoroughly and dry completely. Do not immerse the base unit in water.
- Placement: Place the frother base on a stable, flat, and dry surface, away from heat sources and water.
- Power Connection: Plug the power cord into a standard electrical outlet. Ensure the voltage matches the requirements specified on the product label.
Operating Instructions
Frothing Milk
- Add Milk: Pour cold milk into the frothing pitcher. Observe the internal fill lines for minimum and maximum levels. For frothing, do not exceed the "MAX FROTH" line. The capacity is 8.5 ounces.
- Attach Lid: Securely place the lid on the frothing pitcher.
- Place on Base: Position the frothing pitcher onto the power base.
- Start Frothing: Press the power button. The button will illuminate, indicating the frother is operating. The frother will automatically stop when the milk reaches the optimal temperature and froth consistency, typically within 90 seconds.
- Serve: Carefully remove the pitcher from the base and pour the frothed milk into your beverage.
Warming Milk (without frothing)
- Add Milk: Pour cold milk into the frothing pitcher, ensuring it does not exceed the "MAX WARM" line (if applicable, or the general max line if only one is present).
- Remove Whisk (if separate): If your model has a removable frothing whisk, remove it for warming milk without froth.
- Follow Steps 2-4 from "Frothing Milk": Attach lid, place on base, and press the power button. The unit will heat the milk to the appropriate temperature.
- Serve: Carefully remove the pitcher from the base and pour the warmed milk.
Maintenance and Cleaning
Regular cleaning ensures optimal performance and longevity of your frother. Always unplug the unit before cleaning.
- Immediate Cleaning: For best results, clean the frothing pitcher immediately after each use to prevent milk residue from drying.
- Pitcher Cleaning: The frothing pitcher has a non-stick surface and is easy to clean. Wash the interior with warm, soapy water using a soft sponge or cloth. Rinse thoroughly. The pitcher is not dishwasher safe and should not be immersed in water beyond the interior.
- Lid and Whisk: Wash the lid and frothing whisk (if removable) with warm, soapy water. Rinse and dry completely.
- Base Unit: Wipe the exterior of the power base with a damp cloth. Never immerse the power base in water or any other liquid.
- Drying: Ensure all parts are completely dry before reassembling or storing the frother.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Frother does not turn on. | Not plugged in; power outage; frother not properly seated on base. | Ensure unit is securely plugged into a working outlet. Check circuit breaker. Ensure pitcher is correctly placed on the power base. |
| Milk is not frothing or heating properly. | Too much or too little milk; incorrect milk type; whisk not installed (if applicable); unit needs cleaning. | Ensure milk is between MIN and MAX fill lines. Use cold milk. Ensure frothing whisk is properly installed. Clean the frother thoroughly. |
| Unit stops prematurely. | Overheating; insufficient milk. | Allow unit to cool down. Ensure milk level is above the MIN line. |
| Burnt smell or residue. | Milk residue left on heating plate. | Clean the interior of the pitcher immediately after each use. Ensure no milk spills onto the heating element on the base. |
Specifications
- Brand: Keurig
- Model Number: 5074
- UPC: 649645050744
- Color: Stainless
- Material: Aluminum
- Product Dimensions: 4.5" (W) x 7" (H)
- Item Weight: 2.5 Pounds
- Capacity: 8.5 ounces
- Power Source: Corded Electric
- Recommended Use: Residential
- Care Instructions: Hand Wash Only (pitcher)
Warranty and Support
For warranty information or technical support, please refer to the official Keurig website or contact Keurig customer service directly. Keep your purchase receipt as proof of purchase for warranty claims.
Keurig Customer Service: Visit Keurig.com/contact-us