Introduction
This manual provides instructions for the assembly, operation, maintenance, and troubleshooting of your Inter Link Collecty Hanging Display Wall Shelf. Please read these instructions carefully before beginning assembly or use to ensure safe and correct installation and operation.
Safety Information
- Always follow the assembly instructions provided in the product packaging.
- Ensure the product is securely mounted to the wall before placing any items on the shelves. Improper mounting can lead to injury or damage.
- Do not overload the shelves. The maximum weight capacity is 500 grams (0.5 kg) per shelf. Exceeding this limit can cause the shelf to detach from the wall or collapse.
- Keep small parts and packaging materials away from children to prevent choking hazards.
- Handle glass components with care to avoid breakage and injury.
Package Contents
Verify that all components are present before starting assembly. The package should include:
- Display case frame (MDF, black and white)
- Glass sliding doors (tempered glass)
- Four (4) adjustable shelves
- Mounting hardware (screws, wall anchors)
- Assembly instructions manual
- Plastic guides for glass doors
Setup and Assembly
Assembly is required for this product. Refer to the detailed assembly instructions included in your product packaging for step-by-step guidance. The following general steps apply:
- Unpack Components: Carefully remove all parts from the packaging and lay them out on a clean, soft surface to prevent scratches.
- Assemble Frame: Follow the instructions to connect the frame pieces. Note: Part 1 must be positioned at the top, as the plastic guide for the glass doors is wider in this section.
- Install Glass Doors: Carefully insert the tempered glass sliding doors into their designated tracks.
- Wall Mounting: This display shelf is designed for wall mounting. Choose a suitable location on a sturdy wall. Use the provided mounting hardware. It is recommended to use a level to ensure the shelf is mounted straight. For optimal stability, consider using additional wall supports if the wall material or intended load requires it.
- Insert Shelves: Place the four adjustable shelves into the desired positions within the display case.
Image: Product dimensions for planning installation.
Image: Detail of the wall mounting point on the display shelf.
Operation
The Inter Link Collecty Hanging Display Wall Shelf features sliding glass doors and adjustable shelves for versatile display options.
- Sliding Doors: Gently slide the glass doors left or right to open and close the display case. Avoid forcing the doors to prevent damage to the tracks or glass.
- Adjustable Shelves: The four shelves can be repositioned to accommodate items of various heights. To adjust a shelf, carefully lift it out of its current supports and place it onto new supports at the desired level. Ensure the shelf is securely seated before placing items on it.
Image: Overall view of the display shelf with sliding glass doors.
Image: Detail of the tempered glass door, highlighting its safety feature.
Maintenance and Care
To maintain the appearance and longevity of your display shelf:
- Cleaning: Wipe the surfaces with a damp cloth. For glass, use a standard glass cleaner. Avoid abrasive cleaners or harsh chemicals that may damage the finish or glass.
- Dusting: Regularly dust the interior and exterior of the display case to prevent buildup.
- Inspection: Periodically check the wall mounting hardware to ensure it remains secure. Tighten any loose screws if necessary.
Troubleshooting
- Shelf feels unstable after mounting: Ensure all wall mounting screws are fully tightened and that appropriate wall anchors were used for your wall type. If concerns persist, consult a professional for secure installation. Do not exceed the maximum weight capacity of 500 grams per shelf.
- Glass doors do not slide smoothly: Check the plastic guides for any obstructions or misalignment. Ensure the doors are correctly seated in their tracks. Clean the tracks if dust or debris is present.
- Scratches on surfaces: Minor scratches on MDF can sometimes be touched up with a furniture repair marker matching the color. For glass, professional repair may be required for deep scratches.
Specifications
| Brand | Inter Link |
| Model Name | Collecty |
| Model Number | 99800800 |
| Product Dimensions (D x W x H) | 3.74" x 31.5" x 23.62" (9.5 cm x 80 cm x 60 cm) |
| Item Weight | 10 Kilograms |
| Material | Engineered Wood (MDF), Glass |
| Color | Black/White |
| Number of Shelves | 4 (adjustable) |
| Maximum Weight Capacity (per shelf) | 500 Grams |
| Installation Type | Wall Mount |
| Required Assembly | Yes |
Warranty Information
Specific warranty details are typically provided with the product packaging or on the manufacturer's official website. Please refer to those resources for information regarding your product's warranty period and terms.
Customer Support
For further assistance, missing parts, or inquiries not covered in this manual, please contact Inter Link customer support. Contact information can usually be found on the product packaging or the official Inter Link website.
