1. Introduction
The LFT9000 Light Force Therapy System is a home-based unit designed to provide light therapy for minor aches and pains. It utilizes Light Emitting Diodes (LEDs) emitting red and infrared light. The system offers 7 different settings for various applications, aiming to be safe and easy to use with no known side effects.
2. Important Safety Information
Please read all instructions carefully before using the LFT9000 Light Force Therapy System.
- Legal Disclaimer: Statements regarding dietary supplements have not been evaluated by the FDA and are not intended to diagnose, treat, cure, or prevent any disease or health condition. This device is intended for minor aches and pains.
- Do not use the device if you are pregnant, have epilepsy, or are sensitive to light. Consult a physician before use if you have any medical conditions or are taking medications that cause light sensitivity.
- Avoid direct eye exposure to the light. Protective eyewear is recommended during use.
- Keep out of reach of children.
- Do not use on broken skin or open wounds.
- Do not immerse the device in water or other liquids.
- Unplug the device when not in use and before cleaning.
3. Product Features
The LFT9000 Light Force Therapy System offers the following features:
- Designed for minor pain relief.
- Features advanced protocols for usage.
- No known side effects when used as directed.
- Easy to use, offering an alternative to pills or needles.
- Includes 7 different light therapy settings.
4. Package Contents
Please check the package for the following items:
- LFT9000 Light Force Therapy Device
- Power Adapter
- User Manual (this document)
Figure 1: The LFT9000 Light Force Therapy Device. This image shows the device from the front, with its red LEDs illuminated, indicating it is in operation. The device has a dark casing and a handle on top.
5. Setup
- Unpack the Device: Carefully remove the LFT9000 device and all accessories from the packaging.
- Inspect for Damage: Check the device and power adapter for any visible damage. If damaged, do not use and contact customer support.
- Connect Power: Insert the small end of the power adapter cable into the power input port on the LFT9000 device. Plug the other end of the power adapter into a standard electrical outlet.
- Placement: Place the device on a stable, flat surface or hold it comfortably near the area to be treated. Ensure adequate ventilation around the device.
6. Operating Instructions
Follow these steps to operate your LFT9000 Light Force Therapy System:
- Power On: Ensure the device is properly connected to a power source. Locate the power switch or button on the device and turn it to the "ON" position. The LEDs should illuminate.
- Select Setting: The LFT9000 features 7 different settings. Use the control knob or buttons (if present) to cycle through the available settings. Refer to the device's labels for specific setting indications.
- Application: Position the illuminated part of the device over the desired area for treatment. Maintain a comfortable distance from the skin.
- Treatment Duration: For minor aches and pains, typical treatment sessions last approximately 15-20 minutes per area. Do not exceed 30 minutes per session per area.
- Frequency: The device can be used once or twice daily on the affected area.
- Power Off: After your session, turn the power switch or button to the "OFF" position. Unplug the device from the electrical outlet when not in use.
Note: For specific advanced protocols or guidance on selecting the appropriate setting, consult the additional resources provided by LFT9000 or a wellness professional.
7. Maintenance
- Cleaning: Ensure the device is unplugged before cleaning. Wipe the surface of the device with a soft, dry, or slightly damp cloth. Do not use abrasive cleaners, solvents, or immerse the device in water.
- Storage: Store the device in a cool, dry place, away from direct sunlight and extreme temperatures. Keep it in its original packaging or a protective case to prevent damage.
- Cord Care: Do not wrap the power cord tightly around the device. Avoid kinking or stressing the power cord.
8. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Device does not turn on. | Not plugged in; power outlet not working; power switch off; faulty power adapter. | Ensure power adapter is securely plugged into both the device and a working electrical outlet. Check the power switch is in the "ON" position. Try a different outlet. If issues persist, contact support. |
| Lights are dim or flickering. | Low power supply; internal connection issue. | Ensure the power adapter is fully inserted. If the problem continues, discontinue use and contact customer support. |
| Device feels hot during use. | Normal operation; blocked ventilation. | A slight warmth is normal. Ensure ventilation openings are not blocked. If the device becomes excessively hot, turn it off immediately and allow it to cool. Contact support if overheating persists. |
9. Specifications
- Model: LFT9000
- Light Source: Red and Infrared LEDs
- Settings: 7 different operational settings
- ASIN: B00270LQ7W
- First Available: April 20, 2009
10. Warranty and Support
The LFT9000 Light Force Therapy System is a refurbished product. Please note the following regarding returns and support:
- All returned items are subject to a 20% restocking fee.
- No returns are accepted after 30 days from the purchase date, as per Amazon's return policy.
- For additional help or inquiries, a team of wellness professionals is available to offer support. Please refer to your purchase documentation for contact information.
