Instruction Manual

Product Overview

The Lee's Tackle RH570 Swivel Base Rod Holder is a premium, heavy-duty accessory designed for serious anglers. Constructed from durable stainless steel, this bulkhead mount rod holder features a unique swivel base mechanism that significantly enhances fishing efficiency and reduces strain on equipment, particularly when using bent butt tackle.

Its innovative design allows the rod butt to rotate freely when side pressure is applied to the rod tip, preventing line fraying and ensuring the rod tip follows the fish. This feature is especially beneficial in high-stress fishing scenarios, such as targeting large tuna, where high drag settings are common.

Key Features

• Heavy-Duty Stainless Steel Construction: Ensures maximum durability and corrosion resistance in marine environments.
• Unique Swivel Base: Allows the rod butt to rotate, enabling the rod tip to follow the fish and reducing stress on the rod holder pin.
• Optimized for Bent Butt Tackle: Specifically designed to improve performance and reduce line fraying with bent butt rods.
• Prevents Sheared Rod Holder Pins: The swivel action mitigates forces that can lead to pin failure.
• Enhanced Drag Management: Reduces enhanced drag by allowing the line to stream directly from the roller tip.
• Easy Rod Removal: Rods are more easily removed as they are not rigidly locked.
• Versatile Use: Functions as a standard rod holder for straight butt rods, which can be manually rotated.
• Adjustable Swivel Torque: Torque required for swivel rotation can be adjusted via nylon drag washers and a stainless steel lock nut.

Setup and Installation

The RH570 rod holder is designed for bulkhead or side mounting. Proper installation is crucial for safety and optimal performance.

A polished stainless steel rod holder with a white inner sleeve, designed for bulkhead mounting. It features a unique swivel base mechanism at the bottom, allowing the rod to rotate under pressure. Four mounting flanges with pre-drilled holes are visible on the sides.

Installation Steps:

1. Select Mounting Location: Choose a sturdy bulkhead or side surface that can support the weight and forces exerted during fishing. Ensure there is sufficient clearance for rod movement.
2. Mark Drilling Points: Position the rod holder against the chosen surface. Use the four mounting flanges as a template to accurately mark the drilling points for the fasteners.
3. Drill Pilot Holes: Drill pilot holes at the marked locations. Ensure the drill bit size is appropriate for the fasteners you intend to use (fasteners are not included).
4. Secure the Rod Holder: Align the rod holder with the drilled holes and secure it firmly using marine-grade stainless steel fasteners. Ensure all fasteners are tightened securely to prevent any movement during use.
5. Verify Stability: After installation, gently test the rod holder's stability to ensure it is rigidly mounted and can withstand fishing loads.

Note: Professional installation is recommended for optimal safety and performance.

Operating Instructions

The RH570 rod holder is designed for both bent butt and straight butt rods, offering distinct advantages for each.

Using with Bent Butt Tackle:

• Insert the bent butt rod into the rod holder.
• When side pressure is applied to the rod tip (e.g., during a fight with a fish), the unique swivel base allows the rod butt to rotate within the holder.
• This rotation ensures the rod tip naturally follows the fish, reducing line fraying and maintaining optimal line alignment with the roller tip.
• The swivel action also significantly reduces the tremendous forces applied to the rod holder pin, preventing potential shearing.

Using with Straight Butt Rods:

• The swivel base holder functions as a standard rod holder when used with straight butt rods.
• Straight butt rods can be manually rotated within the holder to ensure the fishing line remains properly aligned with the rod's roller tip.

Adjusting Swivel Torque:

The amount of torque required to rotate the swivel can be adjusted. This is achieved by modifying the pressure on the two nylon drag washers located at the bottom of the rod holder. Adjust the stainless steel lock nut at the bottom to increase or decrease the pressure on these washers, thereby setting the desired swivel resistance.

Maintenance

Regular maintenance will ensure the longevity and optimal performance of your Lee's Tackle RH570 rod holder.

• Rinse After Use: After each use, especially in saltwater environments, thoroughly rinse the rod holder with fresh water to remove salt residue and debris.
• Clean Stainless Steel: Periodically clean the stainless steel surfaces with a mild soap and water solution, then rinse and dry. For stubborn stains or to restore luster, use a marine-grade stainless steel cleaner.
• Inspect Fasteners: Regularly check all mounting fasteners for tightness. Re-tighten if necessary to ensure the rod holder remains securely attached.
• Lubricate Swivel Mechanism: Occasionally apply a small amount of marine-grade lubricant to the swivel mechanism and nylon drag washers to ensure smooth operation.
• Check for Damage: Inspect the rod holder for any signs of wear, corrosion, or damage. Address any issues promptly to prevent further deterioration.

Troubleshooting

Specifications

Warranty and Support

Specific warranty information for the Lee's Tackle RH570 rod holder is typically provided by the manufacturer at the time of purchase or can be found on their official website.

For technical support, product inquiries, or warranty claims, please contact Lee's Tackle directly through their official channels. It is recommended to have your product model number (RH570) and purchase details available when contacting support.

You may visit the official Lee's Tackle website for the most up-to-date information and contact details: www.leestackle.com