1. Introduction
This manual provides essential information for the proper installation, operation, and maintenance of your TYPE S TOURING ITEMS Steering Wheel Spinner Knob (Model: AC50092-60/6). Please read this manual thoroughly before use to ensure safe and efficient operation.
2. Product Features
- Fits most standard steering wheels.
- Ergonomic design for comfortable steering control.
- Heavy-duty clamp with cushion insert for a secure fit.
- Easy to install.
3. Package Contents
Verify that all items are present in the package:
- Steering Wheel Spinner Knob
- Mounting Clamp
- Rubber Insert Pad (for thinner steering wheels)
- Hex Wrench
- Mounting Screws
4. Installation Instructions
Follow these steps to properly install the Steering Wheel Spinner Knob:
- Determine Steering Wheel Thickness: Measure the thickness of your steering wheel rim. The knob is designed to fit steering wheels with a diameter up to 1.3 inches (approximately 33mm).
- Prepare the Clamp: If your steering wheel is thinner, insert the provided rubber insert pad into the mounting clamp to ensure a snug fit and protect the steering wheel surface. The rubber pad also helps prevent slippage.
- Position the Knob: Choose a comfortable and safe position on your steering wheel for the spinner knob. Ensure it does not interfere with airbag deployment or other vehicle controls.
- Attach the Clamp: Place the two halves of the mounting clamp around the chosen section of the steering wheel. Align the screw holes.
- Secure the Screws: Insert the mounting screws through the clamp halves and tighten them using the provided hex wrench. Tighten evenly until the knob is firmly secured and does not rotate independently on the steering wheel. Do not overtighten.
Figure 1: Steering Wheel Spinner Knob installed on a car steering wheel, demonstrating its position and appearance.
Figure 2: Close-up view of the TYPE S TOURING ITEMS Steering Wheel Spinner Knob, highlighting its design and the "TYPE S" logo.
Installation Videos
Video 1: This video demonstrates the installation process of a similar steering wheel knob, including how to use the rubber insert for different steering wheel thicknesses. It shows the components and the tightening procedure.
Video 2: This video provides a detailed unboxing and installation guide for a steering wheel spinner knob, explaining the different screw sizes and the function of the rubber gasket for secure attachment.
5. Operating Instructions
The Steering Wheel Spinner Knob is designed to assist with steering, particularly during low-speed maneuvers, parking, and tight turns. It allows for easier one-handed steering.
- Grip: Place your palm over the knob. The ergonomic design allows for a comfortable and secure grip.
- Steering: Rotate the knob to turn the steering wheel. The smooth spinning action reduces effort required for steering.
- Safety: Always maintain control of your vehicle. While the spinner knob aids in steering, it is crucial to use both hands on the steering wheel when driving at higher speeds or in complex traffic conditions.
Operation Video
Video 3: This video demonstrates the smooth and effortless operation of a steering wheel spinner knob in a car, highlighting its utility for easy maneuvering and parking.
6. Maintenance
To ensure the longevity and proper function of your spinner knob:
- Regular Cleaning: Wipe the knob and clamp with a soft, damp cloth to remove dust and grime. Avoid harsh chemicals.
- Check Tightness: Periodically check the mounting screws to ensure they remain tight. Retighten if necessary to prevent movement or damage to the steering wheel.
- Inspect for Wear: Inspect the rubber insert pad and the knob for any signs of wear or damage. Replace if compromised to maintain secure fit and protection.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Knob is loose or slides on steering wheel. | Screws are not tight enough; incorrect or missing rubber pad. | Retighten mounting screws. Ensure the rubber insert pad is correctly installed and provides a snug fit. If the steering wheel is too thin, consider adding additional padding or a thicker rubber insert. |
| Knob does not spin smoothly. | Dirt or debris in the spinning mechanism; internal damage. | Clean the knob thoroughly. If the issue persists, the internal mechanism may be damaged, and replacement might be necessary. |
| Steering wheel cover interferes with installation. | Steering wheel cover adds too much thickness or prevents secure clamping. | Remove the steering wheel cover before installing the spinner knob. The knob is designed for direct attachment to the steering wheel for optimal security and function. |
8. Specifications
- Brand: TYPE S TOURING ITEMS
- Model Number: AC50092-60/6
- Color: Black/Silver
- Item Weight: 4 ounces
- Product Dimensions: 7.4 x 4.2 x 2.5 inches
- Compatible Steering Wheel Thickness: Up to 1.3 inches (with or without rubber insert)
- Material: Durable plastic and metal construction
- Fit Type: Universal Fit (for compatible steering wheel thicknesses)
9. Safety Warnings
WARNING: This product is subject to California Proposition 65. It may expose you to chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
- Always drive responsibly and maintain full control of your vehicle.
- Do not use the spinner knob as a substitute for proper two-handed steering, especially at high speeds or in emergency situations.
- Ensure the knob is securely fastened before driving. A loose knob can be a distraction and a safety hazard.
- Check local and state laws regarding the use of steering wheel spinner knobs in vehicles. Some jurisdictions may have restrictions.
10. Warranty and Support
For warranty information, product support, or to register your product for an extended warranty, please visit the official TYPE S TOURING ITEMS website or contact customer care.
- Customer Care Hotline: US-based support available.
- Installation Videos: Access additional installation guides and tips on the official YouTube channel.